Top Seller
LR8431-20
LR8431 - Handheld 10-channel Data Logger for voltage, temperature and pulse logging
10-channel handheld data logger for voltage / temperature plus 4 channels for pulse / rotation, isolated inputs, up to 60 VDC, max. sampling speed 10 ms, up to 16 GB USB storage capacity, LCD display, signal input via M3 screw terminals
9465-10
9465-10 - Straight Test Lead with Pogo Pins
9465-10 straight pin type test lead, max. 60 VDC, total length 1900 mm, pogo pin tip with coaxial design, for BT3554 portable battery tester and RM3548 portable resistance meter
RM3548
RM3548 - Portable Resistance Meter
Handheld four-wire DC milliohm meter, test current range 500 nA to 1 A, ten resistance
ranges from 3 mOhm to 3 MOhm Banner Specs (= Attributes) 0.02% basic accuracy test current range 500 nA to 1 A 10 resistance ranges from 3 mOhm to 3 MOhm 0.1 µOhm maximum resolution USPs Only portable meter for low resistances with high accuracies Withstand DC voltages of up to 70 V Applications High voltage connection tests in EVs Motor Winding tests Cable length testing Mechanical connection tests In detail:The HIOKI RM3548 Resistance Meter is a portable, highly sensitive milliohm meter designed
for precise small resistance measurements. It delivers a basic accuracy of 0.02% and a
resolution of 0.1 μΩ, covering a range from 3 mΩ to 3 MΩ. This makes it ideal for monitoring
even slight changes in contact resistance, such as in electric vehicles (EVs), motor and
generator windings, or for high-precision cable length measurements.The RM3548 is compact and lightweight. Weighing less than one kilogram, this resistance
meter allows for easy use in hard-to-reach places. Its rugged design and portability make it a
convenient tool for fieldwork and maintenance tasks. With a high current capability of up to 1
A, it can measure low resistance values reliably, making it suitable for checking continuity in
automotive ground lines and inspecting welds in aircraft fuselages.The Resistance Meter RM3548 features temperature correction, ensuring accurate
measurements by adjusting for ambient conditions. It also includes advanced functions like
interval measurement, making it suitable for temperature-rise testing. The device requires no
warm-up or zero adjustments, allowing for immediate operation. With a memory capacity for 1000 data points and easy USB data transfer, the RM3548 is
highly functional for on-site testing. The resistance meter's overvoltage protection up to 70 V
DC and intuitive user interface further enhance its reliability and usability for professionals
working in maintenance and testing applications. This four-wire resistance meter combines
precision, portability, and ease of use, making it a versatile choice for a wide range of
industrial applications.
BT3562A
BT3562A - Battery Tester, 100 V, 3 mOhm
The Hioki BT3562A Battery Tester is an advanced measurement instrument designed for fully automated testing of battery packs, particularly in electric vehicles (xEVs). It simultaneously measures internal resistance and open-circuit voltage (OCV), covering resistance ranges from 3 mΩ to 3 kΩ and voltage ranges of 6 V, 60 V, and 100 V DC. With a fast measurement speed of approximately 10 ms and a sampling rate of up to 4 ms in ""Extra-FAST"" mode, the BT3562A offers superior performance compared to many competing products. Its LAN interface facilitates easy integration into network systems, and its high tolerance to line resistance ensures robustness in complex testing setups. Additionally, the device's electrostatic-resistant design protects against damage caused by static discharges, making it highly reliable in production environments. Technical Details: Resistance measuring range: 3 mΩ to 3 kΩVoltage measuring range: 6 V, 60 V, 100 V DC Measurement speed: 10 ms Sampling rate: 4 ms in ""Extra-FAST"" mode Interfaces: LAN Features: Electrostatic-resistant design, high tolerance to line resistance
IR4056-20
IR4056 - Digital Insulation Tester
The IR4056 is a digital insulation resistance tester with efficient functions and features to help shorten work time associated with field insulation testing.Technical Details: 5-test ranges: 50 V/100 MΩ to 1000 V/4000 MΩ Digital bar graph PASS/FAIL judgment luminous LCD Continuity check Built-in AC/DC voltage meter (up to 600V)
CM4001
CM4001 - AC Leakage Clamp Meter
The CM4001 is a compact AC leakage clamp meter equipped with slim measuring clamps, allowing easy clamping into tightly packed cables with diameters up to 24 mm. This design enhances safety and reduces working time. The meter offers precise accuracy for current measurements ranging from 0.60 mA to 600.0 A, and operates within a frequency range of 40-1000 Hz. The CM4001 provides a complete solution for various applications, including harmonic measurements. An integrated comparator function enables quicker problem detection. Additionally, the device is Bluetooth-ready for wireless data transmission. Technical Details: Measuring range: 0.60 mA to 600.0 A Frequency range: 40-1000 Hz Cable diameter: Up to 24 mm Key functions: Harmonic measurement, comparator function Wireless data transmission: Prepared for Bluetooth Features: Slim measuring clamps for easy clamping in tight spaces
"
Learn more in our blog🔗 What’s special about HIOKI’s AC Leakage Current Clamps?
Z3210
Z3210 - Bluetooth Adapter
Der Bluetooth-Adapter Z3210 ermöglicht die drahtlose Kommunikation zwischen kompatiblen HIOKI-Produkten und damit eine einfache Datenübertragung und Fernsteuerung.
BT3554-51
BT3554-51 - Portable Battery Tester, 9465-10 Straight Pin Type Lead
Portable battery tester for DC voltage, AC resistance at 1 kHz and temperature. Two voltage ranges (6V and 60V), four resistance ranges (3 mΩ to 3 Ω). Straight pin type lead, optional Bluetooth communication
3269
3269 - Power Supply for Current Probes, 2500 mA
4-channel power supply unit for HIOKI Hall-sensor based zero-flux current probes, 12 VDC output voltage, 2500 mA total maximum output current
LR8431-20
LR8431 - Handheld 10-channel Data Logger for voltage, temperature and pulse logging
10-channel handheld data logger for voltage / temperature plus 4 channels for pulse / rotation, isolated inputs, up to 60 VDC, max. sampling speed 10 ms, up to 16 GB USB storage capacity, LCD display, signal input via M3 screw terminals
9465-10
9465-10 - Straight Test Lead with Pogo Pins
9465-10 straight pin type test lead, max. 60 VDC, total length 1900 mm, pogo pin tip with coaxial design, for BT3554 portable battery tester and RM3548 portable resistance meter
RM3548
RM3548 - Portable Resistance Meter
Handheld four-wire DC milliohm meter, test current range 500 nA to 1 A, ten resistance
ranges from 3 mOhm to 3 MOhm Banner Specs (= Attributes) 0.02% basic accuracy test current range 500 nA to 1 A 10 resistance ranges from 3 mOhm to 3 MOhm 0.1 µOhm maximum resolution USPs Only portable meter for low resistances with high accuracies Withstand DC voltages of up to 70 V Applications High voltage connection tests in EVs Motor Winding tests Cable length testing Mechanical connection tests In detail:The HIOKI RM3548 Resistance Meter is a portable, highly sensitive milliohm meter designed
for precise small resistance measurements. It delivers a basic accuracy of 0.02% and a
resolution of 0.1 μΩ, covering a range from 3 mΩ to 3 MΩ. This makes it ideal for monitoring
even slight changes in contact resistance, such as in electric vehicles (EVs), motor and
generator windings, or for high-precision cable length measurements.The RM3548 is compact and lightweight. Weighing less than one kilogram, this resistance
meter allows for easy use in hard-to-reach places. Its rugged design and portability make it a
convenient tool for fieldwork and maintenance tasks. With a high current capability of up to 1
A, it can measure low resistance values reliably, making it suitable for checking continuity in
automotive ground lines and inspecting welds in aircraft fuselages.The Resistance Meter RM3548 features temperature correction, ensuring accurate
measurements by adjusting for ambient conditions. It also includes advanced functions like
interval measurement, making it suitable for temperature-rise testing. The device requires no
warm-up or zero adjustments, allowing for immediate operation. With a memory capacity for 1000 data points and easy USB data transfer, the RM3548 is
highly functional for on-site testing. The resistance meter's overvoltage protection up to 70 V
DC and intuitive user interface further enhance its reliability and usability for professionals
working in maintenance and testing applications. This four-wire resistance meter combines
precision, portability, and ease of use, making it a versatile choice for a wide range of
industrial applications.
BT3562A
BT3562A - Battery Tester, 100 V, 3 mOhm
The Hioki BT3562A Battery Tester is an advanced measurement instrument designed for fully automated testing of battery packs, particularly in electric vehicles (xEVs). It simultaneously measures internal resistance and open-circuit voltage (OCV), covering resistance ranges from 3 mΩ to 3 kΩ and voltage ranges of 6 V, 60 V, and 100 V DC. With a fast measurement speed of approximately 10 ms and a sampling rate of up to 4 ms in ""Extra-FAST"" mode, the BT3562A offers superior performance compared to many competing products. Its LAN interface facilitates easy integration into network systems, and its high tolerance to line resistance ensures robustness in complex testing setups. Additionally, the device's electrostatic-resistant design protects against damage caused by static discharges, making it highly reliable in production environments. Technical Details: Resistance measuring range: 3 mΩ to 3 kΩVoltage measuring range: 6 V, 60 V, 100 V DC Measurement speed: 10 ms Sampling rate: 4 ms in ""Extra-FAST"" mode Interfaces: LAN Features: Electrostatic-resistant design, high tolerance to line resistance
IR4056-20
IR4056 - Digital Insulation Tester
The IR4056 is a digital insulation resistance tester with efficient functions and features to help shorten work time associated with field insulation testing.Technical Details: 5-test ranges: 50 V/100 MΩ to 1000 V/4000 MΩ Digital bar graph PASS/FAIL judgment luminous LCD Continuity check Built-in AC/DC voltage meter (up to 600V)
CM4001
CM4001 - AC Leakage Clamp Meter
The CM4001 is a compact AC leakage clamp meter equipped with slim measuring clamps, allowing easy clamping into tightly packed cables with diameters up to 24 mm. This design enhances safety and reduces working time. The meter offers precise accuracy for current measurements ranging from 0.60 mA to 600.0 A, and operates within a frequency range of 40-1000 Hz. The CM4001 provides a complete solution for various applications, including harmonic measurements. An integrated comparator function enables quicker problem detection. Additionally, the device is Bluetooth-ready for wireless data transmission. Technical Details: Measuring range: 0.60 mA to 600.0 A Frequency range: 40-1000 Hz Cable diameter: Up to 24 mm Key functions: Harmonic measurement, comparator function Wireless data transmission: Prepared for Bluetooth Features: Slim measuring clamps for easy clamping in tight spaces
"
Learn more in our blog🔗 What’s special about HIOKI’s AC Leakage Current Clamps?
Z3210
Z3210 - Bluetooth Adapter
Der Bluetooth-Adapter Z3210 ermöglicht die drahtlose Kommunikation zwischen kompatiblen HIOKI-Produkten und damit eine einfache Datenübertragung und Fernsteuerung.
BT3554-51
BT3554-51 - Portable Battery Tester, 9465-10 Straight Pin Type Lead
Portable battery tester for DC voltage, AC resistance at 1 kHz and temperature. Two voltage ranges (6V and 60V), four resistance ranges (3 mΩ to 3 Ω). Straight pin type lead, optional Bluetooth communication
3269
3269 - Power Supply for Current Probes, 2500 mA
4-channel power supply unit for HIOKI Hall-sensor based zero-flux current probes, 12 VDC output voltage, 2500 mA total maximum output current
LR8431-20
LR8431 - Handheld 10-channel Data Logger for voltage, temperature and pulse logging
10-channel handheld data logger for voltage / temperature plus 4 channels for pulse / rotation, isolated inputs, up to 60 VDC, max. sampling speed 10 ms, up to 16 GB USB storage capacity, LCD display, signal input via M3 screw terminals
9465-10
9465-10 - Straight Test Lead with Pogo Pins
9465-10 straight pin type test lead, max. 60 VDC, total length 1900 mm, pogo pin tip with coaxial design, for BT3554 portable battery tester and RM3548 portable resistance meter
RM3548
RM3548 - Portable Resistance Meter
Handheld four-wire DC milliohm meter, test current range 500 nA to 1 A, ten resistance
ranges from 3 mOhm to 3 MOhm Banner Specs (= Attributes) 0.02% basic accuracy test current range 500 nA to 1 A 10 resistance ranges from 3 mOhm to 3 MOhm 0.1 µOhm maximum resolution USPs Only portable meter for low resistances with high accuracies Withstand DC voltages of up to 70 V Applications High voltage connection tests in EVs Motor Winding tests Cable length testing Mechanical connection tests In detail:The HIOKI RM3548 Resistance Meter is a portable, highly sensitive milliohm meter designed
for precise small resistance measurements. It delivers a basic accuracy of 0.02% and a
resolution of 0.1 μΩ, covering a range from 3 mΩ to 3 MΩ. This makes it ideal for monitoring
even slight changes in contact resistance, such as in electric vehicles (EVs), motor and
generator windings, or for high-precision cable length measurements.The RM3548 is compact and lightweight. Weighing less than one kilogram, this resistance
meter allows for easy use in hard-to-reach places. Its rugged design and portability make it a
convenient tool for fieldwork and maintenance tasks. With a high current capability of up to 1
A, it can measure low resistance values reliably, making it suitable for checking continuity in
automotive ground lines and inspecting welds in aircraft fuselages.The Resistance Meter RM3548 features temperature correction, ensuring accurate
measurements by adjusting for ambient conditions. It also includes advanced functions like
interval measurement, making it suitable for temperature-rise testing. The device requires no
warm-up or zero adjustments, allowing for immediate operation. With a memory capacity for 1000 data points and easy USB data transfer, the RM3548 is
highly functional for on-site testing. The resistance meter's overvoltage protection up to 70 V
DC and intuitive user interface further enhance its reliability and usability for professionals
working in maintenance and testing applications. This four-wire resistance meter combines
precision, portability, and ease of use, making it a versatile choice for a wide range of
industrial applications.
BT3562A
BT3562A - Battery Tester, 100 V, 3 mOhm
The Hioki BT3562A Battery Tester is an advanced measurement instrument designed for fully automated testing of battery packs, particularly in electric vehicles (xEVs). It simultaneously measures internal resistance and open-circuit voltage (OCV), covering resistance ranges from 3 mΩ to 3 kΩ and voltage ranges of 6 V, 60 V, and 100 V DC. With a fast measurement speed of approximately 10 ms and a sampling rate of up to 4 ms in ""Extra-FAST"" mode, the BT3562A offers superior performance compared to many competing products. Its LAN interface facilitates easy integration into network systems, and its high tolerance to line resistance ensures robustness in complex testing setups. Additionally, the device's electrostatic-resistant design protects against damage caused by static discharges, making it highly reliable in production environments. Technical Details: Resistance measuring range: 3 mΩ to 3 kΩVoltage measuring range: 6 V, 60 V, 100 V DC Measurement speed: 10 ms Sampling rate: 4 ms in ""Extra-FAST"" mode Interfaces: LAN Features: Electrostatic-resistant design, high tolerance to line resistance
IR4056-20
IR4056 - Digital Insulation Tester
The IR4056 is a digital insulation resistance tester with efficient functions and features to help shorten work time associated with field insulation testing.Technical Details: 5-test ranges: 50 V/100 MΩ to 1000 V/4000 MΩ Digital bar graph PASS/FAIL judgment luminous LCD Continuity check Built-in AC/DC voltage meter (up to 600V)
CM4001
CM4001 - AC Leakage Clamp Meter
The CM4001 is a compact AC leakage clamp meter equipped with slim measuring clamps, allowing easy clamping into tightly packed cables with diameters up to 24 mm. This design enhances safety and reduces working time. The meter offers precise accuracy for current measurements ranging from 0.60 mA to 600.0 A, and operates within a frequency range of 40-1000 Hz. The CM4001 provides a complete solution for various applications, including harmonic measurements. An integrated comparator function enables quicker problem detection. Additionally, the device is Bluetooth-ready for wireless data transmission. Technical Details: Measuring range: 0.60 mA to 600.0 A Frequency range: 40-1000 Hz Cable diameter: Up to 24 mm Key functions: Harmonic measurement, comparator function Wireless data transmission: Prepared for Bluetooth Features: Slim measuring clamps for easy clamping in tight spaces
"
Learn more in our blog🔗 What’s special about HIOKI’s AC Leakage Current Clamps?
Z3210
Z3210 - Bluetooth Adapter
Der Bluetooth-Adapter Z3210 ermöglicht die drahtlose Kommunikation zwischen kompatiblen HIOKI-Produkten und damit eine einfache Datenübertragung und Fernsteuerung.
EU-wide shipping for € 9.90
Various payment options
Warehouse in Germany
Fast, reliable delivery
Highlights
slide 9 to 13 of 9
20
%
CT7116
CT7116 - AC LEAKAGE CURRENT SENSOR
The CT7116 is designed for precise leakage current measurements with high accuracy. It supports BNC conversion for versatile applications. Technical Details: Rated current: 6 A AC Frequency range: 40 Hz to 5 kHz Amplitude accuracy: ±1.0% rdg, ±0.05% f.s. Diameter of conductors: 40 mm (1.57 in.) Cable length: 2.5 m (8.20 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) Output terminal: PL14
20
%
CT7046
CT7046 - AC FLEXIBLE CURRENT SENSOR
CT7046 - AC Flexible Current Sensor
The CT7046 AC Flexible Current Sensor is designed for high-current measurements with a larger diameter to accommodate broader conductors. It provides reliable performance over a wide frequency range. Technical Details: Rated current: 6000 A AC Frequency range: 10 Hz to 50 kHz Amplitude accuracy: ±1.5% rdg, ±0.25% f.s. Diameter of conductors: 254 mm (10.00 in.) Cable length: 2.3 m, 0.2 m³ (7.55 ft., 0.66 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) CAT: IV 600 V, III 1000 V Output terminal: PL14
20
%
9460
9460 - CLIP TYPE LEAD WITH TEMPERATURE SENSOR
The 9460 Clip Type Test Lead with an integrated temperature sensor is designed for use with the HIOKI BT3554 Battery Tester and similar products. With a length of 226 cm, it provides both convenient reach and precise measurements, ensuring reliable testing of batteries under various conditions. The built-in temperature sensor allows for simultaneous monitoring of battery temperature during testing, adding a layer of diagnostic accuracy Technical Details: Type: Clip Type Test Lead with temperature sensor Length: 226 cm Large Kelvin Clamps Compatibility: HIOKI BT3554 Battery Tester and similar products Function: Battery testing and temperature monitoring
20
%
LR8520
LR8520 - Bluetooth Data Logger with Fungal Analysis
The LR8520 Wireless Fungal Logger offers precise one-channel temperature and humidity measurement with advanced features such as fungal index recording and growth prediction. With Bluetooth® connectivity for easy data download and a compact design, it is ideal for monitoring environments where fungal growth is a concern. Technical Details: Measurement range: -40 °C to 80 °C, 0 to 100 %rh Accuracy: +/- 0.5°C, +/- 3%rh Memory: 500,000 data points per channel Recording intervals: Starting from 0.5s Connectivity: Bluetooth® Features: Fungal index, growth prediction, alarm output
20
%
Z4001
Z4001 - SD Memory Card 2GB
The Z4001 SD Memory Card offers 2 GB of industrial-grade storage, ideal for use with the HIOKI PW3360 Power Logger and similar products. Technical Details:Capacity: 2 GB Compatibility: HIOKI PW3360
20
%
L1011-10
L1011-10 - CONVERSION CABLE
The L1011-10 is a 2.4 m conversion cable for converting BNC to wire, designed for use with the HIOKI P9000 Differential Probe and similar products or connection with screw terminals . Technical Details: Connector: BNC(f) plastic version Purpose: Converts BNC-male connector to open wire Length: 2.4 meters Wire type: Two open-end wires (black/red)
20
%
CT7116
CT7116 - AC LEAKAGE CURRENT SENSOR
The CT7116 is designed for precise leakage current measurements with high accuracy. It supports BNC conversion for versatile applications. Technical Details: Rated current: 6 A AC Frequency range: 40 Hz to 5 kHz Amplitude accuracy: ±1.0% rdg, ±0.05% f.s. Diameter of conductors: 40 mm (1.57 in.) Cable length: 2.5 m (8.20 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) Output terminal: PL14
20
%
CT7046
CT7046 - AC FLEXIBLE CURRENT SENSOR
CT7046 - AC Flexible Current Sensor
The CT7046 AC Flexible Current Sensor is designed for high-current measurements with a larger diameter to accommodate broader conductors. It provides reliable performance over a wide frequency range. Technical Details: Rated current: 6000 A AC Frequency range: 10 Hz to 50 kHz Amplitude accuracy: ±1.5% rdg, ±0.25% f.s. Diameter of conductors: 254 mm (10.00 in.) Cable length: 2.3 m, 0.2 m³ (7.55 ft., 0.66 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) CAT: IV 600 V, III 1000 V Output terminal: PL14
20
%
9460
9460 - CLIP TYPE LEAD WITH TEMPERATURE SENSOR
The 9460 Clip Type Test Lead with an integrated temperature sensor is designed for use with the HIOKI BT3554 Battery Tester and similar products. With a length of 226 cm, it provides both convenient reach and precise measurements, ensuring reliable testing of batteries under various conditions. The built-in temperature sensor allows for simultaneous monitoring of battery temperature during testing, adding a layer of diagnostic accuracy Technical Details: Type: Clip Type Test Lead with temperature sensor Length: 226 cm Large Kelvin Clamps Compatibility: HIOKI BT3554 Battery Tester and similar products Function: Battery testing and temperature monitoring
20
%
LR8520
LR8520 - Bluetooth Data Logger with Fungal Analysis
The LR8520 Wireless Fungal Logger offers precise one-channel temperature and humidity measurement with advanced features such as fungal index recording and growth prediction. With Bluetooth® connectivity for easy data download and a compact design, it is ideal for monitoring environments where fungal growth is a concern. Technical Details: Measurement range: -40 °C to 80 °C, 0 to 100 %rh Accuracy: +/- 0.5°C, +/- 3%rh Memory: 500,000 data points per channel Recording intervals: Starting from 0.5s Connectivity: Bluetooth® Features: Fungal index, growth prediction, alarm output
20
%
Z4001
Z4001 - SD Memory Card 2GB
The Z4001 SD Memory Card offers 2 GB of industrial-grade storage, ideal for use with the HIOKI PW3360 Power Logger and similar products. Technical Details:Capacity: 2 GB Compatibility: HIOKI PW3360
20
%
L1011-10
L1011-10 - CONVERSION CABLE
The L1011-10 is a 2.4 m conversion cable for converting BNC to wire, designed for use with the HIOKI P9000 Differential Probe and similar products or connection with screw terminals . Technical Details: Connector: BNC(f) plastic version Purpose: Converts BNC-male connector to open wire Length: 2.4 meters Wire type: Two open-end wires (black/red)
20
%
CT7116
CT7116 - AC LEAKAGE CURRENT SENSOR
The CT7116 is designed for precise leakage current measurements with high accuracy. It supports BNC conversion for versatile applications. Technical Details: Rated current: 6 A AC Frequency range: 40 Hz to 5 kHz Amplitude accuracy: ±1.0% rdg, ±0.05% f.s. Diameter of conductors: 40 mm (1.57 in.) Cable length: 2.5 m (8.20 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) Output terminal: PL14
20
%
CT7046
CT7046 - AC FLEXIBLE CURRENT SENSOR
CT7046 - AC Flexible Current Sensor
The CT7046 AC Flexible Current Sensor is designed for high-current measurements with a larger diameter to accommodate broader conductors. It provides reliable performance over a wide frequency range. Technical Details: Rated current: 6000 A AC Frequency range: 10 Hz to 50 kHz Amplitude accuracy: ±1.5% rdg, ±0.25% f.s. Diameter of conductors: 254 mm (10.00 in.) Cable length: 2.3 m, 0.2 m³ (7.55 ft., 0.66 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) CAT: IV 600 V, III 1000 V Output terminal: PL14
20
%
9460
9460 - CLIP TYPE LEAD WITH TEMPERATURE SENSOR
The 9460 Clip Type Test Lead with an integrated temperature sensor is designed for use with the HIOKI BT3554 Battery Tester and similar products. With a length of 226 cm, it provides both convenient reach and precise measurements, ensuring reliable testing of batteries under various conditions. The built-in temperature sensor allows for simultaneous monitoring of battery temperature during testing, adding a layer of diagnostic accuracy Technical Details: Type: Clip Type Test Lead with temperature sensor Length: 226 cm Large Kelvin Clamps Compatibility: HIOKI BT3554 Battery Tester and similar products Function: Battery testing and temperature monitoring
20
%
LR8520
LR8520 - Bluetooth Data Logger with Fungal Analysis
The LR8520 Wireless Fungal Logger offers precise one-channel temperature and humidity measurement with advanced features such as fungal index recording and growth prediction. With Bluetooth® connectivity for easy data download and a compact design, it is ideal for monitoring environments where fungal growth is a concern. Technical Details: Measurement range: -40 °C to 80 °C, 0 to 100 %rh Accuracy: +/- 0.5°C, +/- 3%rh Memory: 500,000 data points per channel Recording intervals: Starting from 0.5s Connectivity: Bluetooth® Features: Fungal index, growth prediction, alarm output
20
%
Z4001
Z4001 - SD Memory Card 2GB
The Z4001 SD Memory Card offers 2 GB of industrial-grade storage, ideal for use with the HIOKI PW3360 Power Logger and similar products. Technical Details:Capacity: 2 GB Compatibility: HIOKI PW3360
20
%
L1011-10
L1011-10 - CONVERSION CABLE
The L1011-10 is a 2.4 m conversion cable for converting BNC to wire, designed for use with the HIOKI P9000 Differential Probe and similar products or connection with screw terminals . Technical Details: Connector: BNC(f) plastic version Purpose: Converts BNC-male connector to open wire Length: 2.4 meters Wire type: Two open-end wires (black/red)
20
%
CT7116
CT7116 - AC LEAKAGE CURRENT SENSOR
The CT7116 is designed for precise leakage current measurements with high accuracy. It supports BNC conversion for versatile applications. Technical Details: Rated current: 6 A AC Frequency range: 40 Hz to 5 kHz Amplitude accuracy: ±1.0% rdg, ±0.05% f.s. Diameter of conductors: 40 mm (1.57 in.) Cable length: 2.5 m (8.20 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) Output terminal: PL14
20
%
CT7046
CT7046 - AC FLEXIBLE CURRENT SENSOR
CT7046 - AC Flexible Current Sensor
The CT7046 AC Flexible Current Sensor is designed for high-current measurements with a larger diameter to accommodate broader conductors. It provides reliable performance over a wide frequency range. Technical Details: Rated current: 6000 A AC Frequency range: 10 Hz to 50 kHz Amplitude accuracy: ±1.5% rdg, ±0.25% f.s. Diameter of conductors: 254 mm (10.00 in.) Cable length: 2.3 m, 0.2 m³ (7.55 ft., 0.66 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) CAT: IV 600 V, III 1000 V Output terminal: PL14
20
%
9460
9460 - CLIP TYPE LEAD WITH TEMPERATURE SENSOR
The 9460 Clip Type Test Lead with an integrated temperature sensor is designed for use with the HIOKI BT3554 Battery Tester and similar products. With a length of 226 cm, it provides both convenient reach and precise measurements, ensuring reliable testing of batteries under various conditions. The built-in temperature sensor allows for simultaneous monitoring of battery temperature during testing, adding a layer of diagnostic accuracy Technical Details: Type: Clip Type Test Lead with temperature sensor Length: 226 cm Large Kelvin Clamps Compatibility: HIOKI BT3554 Battery Tester and similar products Function: Battery testing and temperature monitoring
20
%
LR8520
LR8520 - Bluetooth Data Logger with Fungal Analysis
The LR8520 Wireless Fungal Logger offers precise one-channel temperature and humidity measurement with advanced features such as fungal index recording and growth prediction. With Bluetooth® connectivity for easy data download and a compact design, it is ideal for monitoring environments where fungal growth is a concern. Technical Details: Measurement range: -40 °C to 80 °C, 0 to 100 %rh Accuracy: +/- 0.5°C, +/- 3%rh Memory: 500,000 data points per channel Recording intervals: Starting from 0.5s Connectivity: Bluetooth® Features: Fungal index, growth prediction, alarm output
20
%
Z4001
Z4001 - SD Memory Card 2GB
The Z4001 SD Memory Card offers 2 GB of industrial-grade storage, ideal for use with the HIOKI PW3360 Power Logger and similar products. Technical Details:Capacity: 2 GB Compatibility: HIOKI PW3360
20
%
L1011-10
L1011-10 - CONVERSION CABLE
The L1011-10 is a 2.4 m conversion cable for converting BNC to wire, designed for use with the HIOKI P9000 Differential Probe and similar products or connection with screw terminals . Technical Details: Connector: BNC(f) plastic version Purpose: Converts BNC-male connector to open wire Length: 2.4 meters Wire type: Two open-end wires (black/red)
20
%
CT7116
CT7116 - AC LEAKAGE CURRENT SENSOR
The CT7116 is designed for precise leakage current measurements with high accuracy. It supports BNC conversion for versatile applications. Technical Details: Rated current: 6 A AC Frequency range: 40 Hz to 5 kHz Amplitude accuracy: ±1.0% rdg, ±0.05% f.s. Diameter of conductors: 40 mm (1.57 in.) Cable length: 2.5 m (8.20 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) Output terminal: PL14
20
%
CT7046
CT7046 - AC FLEXIBLE CURRENT SENSOR
CT7046 - AC Flexible Current Sensor
The CT7046 AC Flexible Current Sensor is designed for high-current measurements with a larger diameter to accommodate broader conductors. It provides reliable performance over a wide frequency range. Technical Details: Rated current: 6000 A AC Frequency range: 10 Hz to 50 kHz Amplitude accuracy: ±1.5% rdg, ±0.25% f.s. Diameter of conductors: 254 mm (10.00 in.) Cable length: 2.3 m, 0.2 m³ (7.55 ft., 0.66 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) CAT: IV 600 V, III 1000 V Output terminal: PL14
Special Measurement Solutions
MR6000-MAX
MR6000-MAX promotion bundle
Promotion bundle with 20%1) discount, including MR6000-01 Memory Recorder, U8332 SSD Unit and Z5021 Probe Power Unit
PW8001
PW8001 - High Precision Power Analyzer
High precision power analyzer for power converter and inverter efficiency analysis, ±0.03% basic accuracy, 15 MHz sampling rate, 18-bit conversion, automatic phase shift correction for HIOKI current sensors, 1 ms data update rate and excellent noise resistivity of 110 dB @ 100 kHz.Technical details:Basic power accuracy ±0.03%8 power channels combined with motor analysisExcellent noise resistivity of 110 dB @ 100 kHz5 MHz frequency measurement band for powerStable and accurate measurement at 1 ms data update rateFunctions:8 power channels in combination with motor analysis for dual drivetrain analysisUnique power range with 2 A to 2 kA high accuracy HIOKI current sensorsPlug & Play connectivity with HIOKI current sensorsAutomatic Phase Shift Correction secures accurate high-frequency power measurementVisualize high-frequency loss with Power Spectrum Analysis measurementApplications:R&D and production line testing of high efficiency power converters and invertersLoss measurement of transformers and other inductive components under loadMotor efficiency measurementDetailed Description:The HIOKI PW8001 Power Analyzer is a state-of-the-art measurement instrument designed for the most demanding power analysis tasks, providing precise measurement results when evaluating efficiency of latest high accuracy electrical devices and systems. The PW8001 has 8 slots for power input units, which all can be used in combination with the motor analysis function.For the configuration of the PW8001, two types of input units are available that can freely be combined in one instrument according to the application requirements.The U7005 High Bandwidth input unit offers ultimate precision with ±0.03% basic accuracy, a sampling frequency of 15 MHz, 18-bit A/D conversion and a maximum input voltage of 1000 VAC. It is suitable for applications such as efficiency measurements of SiC and GaN based inverters motor drives, and accurate inductor loss measurement of inductors under load. Excellent resistivity for external noise of 110 dB at 100 kHz, ensure accurate and stable results even in the proximity to high frequency power switching semiconductors.
For high-voltage applications, the U7001 input unit provides ±0.07% basic accuracy, a maximum input voltage of 1500 VDC, a sampling frequency of 2.5 MHz, 16-bit A/D conversion and a maximum voltage to ground of 1500 VDC CAT II. It is a suitable unit for applications which need less bandwidth, such as testing of the efficiency of industrial motor drives using IGBTs, or wind turbines and PV power converters.
Combined with HIOKI’s extensive lineup of high-accuracy and high-bandwidth current sensors, probes and direct connection current boxes, the PW8001 offers a unique and comprehensive solution for reliably measuring applications from small electronic devices to large-scale power systems.
The PW8001 power analyzer and the current sensors are developed and produced by HIOKI, making the advanced automatic phase shift correction function possible. This ensures accurate phase angle measurement between the voltage and current, even at high frequencies and low power factors.
The PW8001 offers the unique Power Spectrum Analysis function. While the traditional FFT function determines the harmonics based on the fundamental frequency, limiting the frequency range, this new function covers the entire frequency spectrum of the analyzer. The Power Spectrum Analysis function delivers quick visibility into the high frequency power, providing developers with valuable data for further system efficiency improvements.
Other advanced functions like wideband harmonic analysis, and motor analysis, ensure precise and reliable power analysis results for a wide range of applications in the power electronics industry, such as the development of high efficiency power converters, electrical drivetrains and electrical motors.
The 1 ms update rate enables high-speed data refresh, allowing precise detection and analysis of rapid power fluctuations, such as those occurring during battery charging or discharging in EVs. This feature ensures unprecedented updates without compromising on measurement accuracy.
The optical link function allows the connection of two PW8001 power analyzers to increase the maximum number of measurement channels to 16. It enables synchronized power measurements and efficiency calculation from multiple inputs, optimizing measurement setup and eliminating timing differences in data collection because the sampling of all inputs is synchronized.
MR6000
MR6000 - 32-channel modular memory recorder, 200 MS/s, 1000V, touchscreen
Modular memory recorder, up to 32 channels, max. sampling rate 200 MS/s, max 1000 VDC isolated direct voltage input, up to 256 GB storage with SSD option, intuitive user interface, touchscreen, real-time waveform calculation and real-time saving
PW3390
PW3390 - Portable 4-channel Power Analyzer
Portable 4-channel Power Analyzer, ±0.09% basic accuracy, DC to 200 kHz measurement
band for power, 16-bit conversion, phase shift correction for HIOKI current sensors, 50 ms
data update rate, 16-ch waveform/analog output, motor analysis function, WLTP compliant Banner Specs: ±0.09% basic power accuracy 4 power channels 200 kHz measurement band for power50 ms data update rate 1500 V max. input voltage USPs: - Approved for WLTP testing - Small and lightweight 4-channel power analyzer with motor analysis Applications: WLTP testing Inverter efficiency measurements Motor efficiency measurements Solar power converter efficiency measurements
Model
D/A Output
Motor Analysis
PW3390-01
☐
☐
PW3390-02
☒
☐
PW3390-03
☒
☒
In detail:The HIOKI PW3390 Power Analyzer is a compact, lightweight, 4-channel high-precision
instrument designed to meet the demands of power and efficiency analysis across industries.
Equipped with advanced features, this analyzer excels in measuring and analyzing electrical
power and energy, making it an ideal solution for development, production, and field testing.Built for precision, the PW3390 delivers highly accurate power measurements with a basic
accuracy of ±0.09%, ensuring reliable data for various applications. Its 4 power channels
enable simultaneous multi-system evaluations with a frequency measurement band of up to
200 kHz for power.The instrument's harmonic analysis capabilities, featuring a data refresh time of 50 ms, allow
users to study transient states and evaluate noise or harmonic interference up to 100 kHz.With motor analysis functionality, the PW3390 is perfect for motor and inverter efficiency
evaluations. It provides measurements for torque, rotation speed, slip, and mechanical
power, enabling comprehensive performance analysis of industrial drives. Multiple PW3390 units can be connected to operate as a coordinated measurement system
with up to 32 channels. One unit serves as the primary controller, synchronizing the timing
across all devices to ensure simultaneous data acquisition. For long-term monitoring, the PW3390 can be equipped with the D/A output function, offering
a 16-channel analog output. The first 8 channels can be configured to output waveforms of
all voltage and current inputs at an update rate of 500 kS/s. The remaining 8 channels can be
assigned to numeric measurement values of basic parameters like U1, I2, and P4, with an
update rate of 20 S/s. The PW3390 is ideally suited for use in the automotive sector, particularly for efficiency
analyses of inverters in hybrid and electric vehicles, as well as for standardized testing
procedures to determine energy consumption like WLTP (Worldwide Harmonized Light
Vehicles Test Procedure). It also excels in renewable energy and power conversion
applications, providing precise input and output power data for power conditioners.Designed with a user-friendly interface and a rugged build, the HIOKI PW3390 ensures
intuitive operation and durability in industrial settings. Whether analyzing WLTP efficiency for
(H)EVs, transient power, harmonics, or inverter and motor efficiency, the HIOKI PW3390
delivers outstanding performance and accuracy
More than specs – find more details here:🔗 Zero-flux Current Clamps: Accuracy without effort from mA to kA
RM2610
RM2610 - Measurement System for LIB battery electrode sheets
Electrode Resistance Measurement System, isolates and quantifies the composite layer resistivity and the interface resistance between the composite layer and the aluminum or copper current collector foil of LIB electrode sheets in a single measurement
LR8102
LR8102 - Modular multi-channel Data Logger for system integration, optical sync, UDP, CAN
The versatile, modular data logger LR8102 can be used in combination with a variety of modules. It is therefore the perfect solution for integration in applications requiring multiple channels and recording intervals as short as 5 ms.
M1100
M1100 - AC Power Supply Module for M7103 Power Module
Dedicated AC Power Supply Module for M7103 Power Module, powers up to four M7103 modules,
100 V to 240 V. Banner Specs (= Attributes): For max. 4x M7103 modules 100 V to 240 V, 50/60 Hz In detail:The M1100 is an AC power supply module specifically designed to provide power to up to four M7103
Power Modules. It can be connected to AC voltage from 100 V to 240 V at 50/60 Hz.
M7103
M7103 - 3-channel power measurement module for LR810x Data Logger Series
Power measurement module for LR8101 and LR8102 Data Logger, up to 1500 VDC, CATII
and 2000 A, 3 power channels, max. update interval 5 ms, DC to 100 kHzBanner Specs: Up to 12 / 120 power channels Power accuracy: 0.02% rdg. ± 0.05% f.s. 1500 VDC / 1000 VAC, CATII 5 ms update interval DC to 100 kHz bandwidth USPs: Multi-channel power measurement with the accuracy of a top-end power analyzer Guaranteed high accuracy up to 1500 VDC, CATII Combine with wide variety of HIOKI current sensors with ratings from 2 A to 2000 ASpace-efficient multi-channel setup Easily expand channels on site with growing production line requirements Applications: Power measurement applications requiring higher number of channels Development of Photovoltaic (PV) string inverters Quality inspection of PV string inverters during productionCharge/discharge testing during development of battery modules and battery packsIn detail: The M7103 power measurement module for LR810x data loggers offers three channels for
highly accurate power logging. One LR8101 or LR8102 Data Logger in combination with the
M1100 AC power supply module supports up to four M7103 modules, giving the user the ability
to log up to 12 power channels simultaneously with one logger. Up to 120 power channels can
be recorded by synchronizing multiple LR8102 Data Logger. The voltage input channels are designed for direct input of voltages of up 1500 VDC or 1000
VAC, CATII making the M7103 ideal for safe and reliable production line testing. All HIOKI highprecision current sensors with an ME15W connector can be combined with the M7103 power measurement module, offering users the flexibility to choose the ideal current sensor for their
specific application. With an update interval of just 5 ms, the module enables detailed logging
of power, voltage, or current with exceptional precision.The sync source sharing feature ensures precise efficiency measurement by using the AC
signal's zero-crossing for calculation to synchronize a primary module with secondary
modules, making the system ideal for high-accuracy applications like quality inspection in PV
string inverter production. This highly flexible logger system offers the possibility to easily
expand channels on-site without the necessity to return the equipment to the factory, saving
valuable time.
MR6000-MAX
MR6000-MAX promotion bundle
Promotion bundle with 20%1) discount, including MR6000-01 Memory Recorder, U8332 SSD Unit and Z5021 Probe Power Unit
PW8001
PW8001 - High Precision Power Analyzer
High precision power analyzer for power converter and inverter efficiency analysis, ±0.03% basic accuracy, 15 MHz sampling rate, 18-bit conversion, automatic phase shift correction for HIOKI current sensors, 1 ms data update rate and excellent noise resistivity of 110 dB @ 100 kHz.Technical details:Basic power accuracy ±0.03%8 power channels combined with motor analysisExcellent noise resistivity of 110 dB @ 100 kHz5 MHz frequency measurement band for powerStable and accurate measurement at 1 ms data update rateFunctions:8 power channels in combination with motor analysis for dual drivetrain analysisUnique power range with 2 A to 2 kA high accuracy HIOKI current sensorsPlug & Play connectivity with HIOKI current sensorsAutomatic Phase Shift Correction secures accurate high-frequency power measurementVisualize high-frequency loss with Power Spectrum Analysis measurementApplications:R&D and production line testing of high efficiency power converters and invertersLoss measurement of transformers and other inductive components under loadMotor efficiency measurementDetailed Description:The HIOKI PW8001 Power Analyzer is a state-of-the-art measurement instrument designed for the most demanding power analysis tasks, providing precise measurement results when evaluating efficiency of latest high accuracy electrical devices and systems. The PW8001 has 8 slots for power input units, which all can be used in combination with the motor analysis function.For the configuration of the PW8001, two types of input units are available that can freely be combined in one instrument according to the application requirements.The U7005 High Bandwidth input unit offers ultimate precision with ±0.03% basic accuracy, a sampling frequency of 15 MHz, 18-bit A/D conversion and a maximum input voltage of 1000 VAC. It is suitable for applications such as efficiency measurements of SiC and GaN based inverters motor drives, and accurate inductor loss measurement of inductors under load. Excellent resistivity for external noise of 110 dB at 100 kHz, ensure accurate and stable results even in the proximity to high frequency power switching semiconductors.
For high-voltage applications, the U7001 input unit provides ±0.07% basic accuracy, a maximum input voltage of 1500 VDC, a sampling frequency of 2.5 MHz, 16-bit A/D conversion and a maximum voltage to ground of 1500 VDC CAT II. It is a suitable unit for applications which need less bandwidth, such as testing of the efficiency of industrial motor drives using IGBTs, or wind turbines and PV power converters.
Combined with HIOKI’s extensive lineup of high-accuracy and high-bandwidth current sensors, probes and direct connection current boxes, the PW8001 offers a unique and comprehensive solution for reliably measuring applications from small electronic devices to large-scale power systems.
The PW8001 power analyzer and the current sensors are developed and produced by HIOKI, making the advanced automatic phase shift correction function possible. This ensures accurate phase angle measurement between the voltage and current, even at high frequencies and low power factors.
The PW8001 offers the unique Power Spectrum Analysis function. While the traditional FFT function determines the harmonics based on the fundamental frequency, limiting the frequency range, this new function covers the entire frequency spectrum of the analyzer. The Power Spectrum Analysis function delivers quick visibility into the high frequency power, providing developers with valuable data for further system efficiency improvements.
Other advanced functions like wideband harmonic analysis, and motor analysis, ensure precise and reliable power analysis results for a wide range of applications in the power electronics industry, such as the development of high efficiency power converters, electrical drivetrains and electrical motors.
The 1 ms update rate enables high-speed data refresh, allowing precise detection and analysis of rapid power fluctuations, such as those occurring during battery charging or discharging in EVs. This feature ensures unprecedented updates without compromising on measurement accuracy.
The optical link function allows the connection of two PW8001 power analyzers to increase the maximum number of measurement channels to 16. It enables synchronized power measurements and efficiency calculation from multiple inputs, optimizing measurement setup and eliminating timing differences in data collection because the sampling of all inputs is synchronized.
MR6000
MR6000 - 32-channel modular memory recorder, 200 MS/s, 1000V, touchscreen
Modular memory recorder, up to 32 channels, max. sampling rate 200 MS/s, max 1000 VDC isolated direct voltage input, up to 256 GB storage with SSD option, intuitive user interface, touchscreen, real-time waveform calculation and real-time saving
PW3390
PW3390 - Portable 4-channel Power Analyzer
Portable 4-channel Power Analyzer, ±0.09% basic accuracy, DC to 200 kHz measurement
band for power, 16-bit conversion, phase shift correction for HIOKI current sensors, 50 ms
data update rate, 16-ch waveform/analog output, motor analysis function, WLTP compliant Banner Specs: ±0.09% basic power accuracy 4 power channels 200 kHz measurement band for power50 ms data update rate 1500 V max. input voltage USPs: - Approved for WLTP testing - Small and lightweight 4-channel power analyzer with motor analysis Applications: WLTP testing Inverter efficiency measurements Motor efficiency measurements Solar power converter efficiency measurements
Model
D/A Output
Motor Analysis
PW3390-01
☐
☐
PW3390-02
☒
☐
PW3390-03
☒
☒
In detail:The HIOKI PW3390 Power Analyzer is a compact, lightweight, 4-channel high-precision
instrument designed to meet the demands of power and efficiency analysis across industries.
Equipped with advanced features, this analyzer excels in measuring and analyzing electrical
power and energy, making it an ideal solution for development, production, and field testing.Built for precision, the PW3390 delivers highly accurate power measurements with a basic
accuracy of ±0.09%, ensuring reliable data for various applications. Its 4 power channels
enable simultaneous multi-system evaluations with a frequency measurement band of up to
200 kHz for power.The instrument's harmonic analysis capabilities, featuring a data refresh time of 50 ms, allow
users to study transient states and evaluate noise or harmonic interference up to 100 kHz.With motor analysis functionality, the PW3390 is perfect for motor and inverter efficiency
evaluations. It provides measurements for torque, rotation speed, slip, and mechanical
power, enabling comprehensive performance analysis of industrial drives. Multiple PW3390 units can be connected to operate as a coordinated measurement system
with up to 32 channels. One unit serves as the primary controller, synchronizing the timing
across all devices to ensure simultaneous data acquisition. For long-term monitoring, the PW3390 can be equipped with the D/A output function, offering
a 16-channel analog output. The first 8 channels can be configured to output waveforms of
all voltage and current inputs at an update rate of 500 kS/s. The remaining 8 channels can be
assigned to numeric measurement values of basic parameters like U1, I2, and P4, with an
update rate of 20 S/s. The PW3390 is ideally suited for use in the automotive sector, particularly for efficiency
analyses of inverters in hybrid and electric vehicles, as well as for standardized testing
procedures to determine energy consumption like WLTP (Worldwide Harmonized Light
Vehicles Test Procedure). It also excels in renewable energy and power conversion
applications, providing precise input and output power data for power conditioners.Designed with a user-friendly interface and a rugged build, the HIOKI PW3390 ensures
intuitive operation and durability in industrial settings. Whether analyzing WLTP efficiency for
(H)EVs, transient power, harmonics, or inverter and motor efficiency, the HIOKI PW3390
delivers outstanding performance and accuracy
More than specs – find more details here:🔗 Zero-flux Current Clamps: Accuracy without effort from mA to kA
RM2610
RM2610 - Measurement System for LIB battery electrode sheets
Electrode Resistance Measurement System, isolates and quantifies the composite layer resistivity and the interface resistance between the composite layer and the aluminum or copper current collector foil of LIB electrode sheets in a single measurement
LR8102
LR8102 - Modular multi-channel Data Logger for system integration, optical sync, UDP, CAN
The versatile, modular data logger LR8102 can be used in combination with a variety of modules. It is therefore the perfect solution for integration in applications requiring multiple channels and recording intervals as short as 5 ms.
M1100
M1100 - AC Power Supply Module for M7103 Power Module
Dedicated AC Power Supply Module for M7103 Power Module, powers up to four M7103 modules,
100 V to 240 V. Banner Specs (= Attributes): For max. 4x M7103 modules 100 V to 240 V, 50/60 Hz In detail:The M1100 is an AC power supply module specifically designed to provide power to up to four M7103
Power Modules. It can be connected to AC voltage from 100 V to 240 V at 50/60 Hz.
M7103
M7103 - 3-channel power measurement module for LR810x Data Logger Series
Power measurement module for LR8101 and LR8102 Data Logger, up to 1500 VDC, CATII
and 2000 A, 3 power channels, max. update interval 5 ms, DC to 100 kHzBanner Specs: Up to 12 / 120 power channels Power accuracy: 0.02% rdg. ± 0.05% f.s. 1500 VDC / 1000 VAC, CATII 5 ms update interval DC to 100 kHz bandwidth USPs: Multi-channel power measurement with the accuracy of a top-end power analyzer Guaranteed high accuracy up to 1500 VDC, CATII Combine with wide variety of HIOKI current sensors with ratings from 2 A to 2000 ASpace-efficient multi-channel setup Easily expand channels on site with growing production line requirements Applications: Power measurement applications requiring higher number of channels Development of Photovoltaic (PV) string inverters Quality inspection of PV string inverters during productionCharge/discharge testing during development of battery modules and battery packsIn detail: The M7103 power measurement module for LR810x data loggers offers three channels for
highly accurate power logging. One LR8101 or LR8102 Data Logger in combination with the
M1100 AC power supply module supports up to four M7103 modules, giving the user the ability
to log up to 12 power channels simultaneously with one logger. Up to 120 power channels can
be recorded by synchronizing multiple LR8102 Data Logger. The voltage input channels are designed for direct input of voltages of up 1500 VDC or 1000
VAC, CATII making the M7103 ideal for safe and reliable production line testing. All HIOKI highprecision current sensors with an ME15W connector can be combined with the M7103 power measurement module, offering users the flexibility to choose the ideal current sensor for their
specific application. With an update interval of just 5 ms, the module enables detailed logging
of power, voltage, or current with exceptional precision.The sync source sharing feature ensures precise efficiency measurement by using the AC
signal's zero-crossing for calculation to synchronize a primary module with secondary
modules, making the system ideal for high-accuracy applications like quality inspection in PV
string inverter production. This highly flexible logger system offers the possibility to easily
expand channels on-site without the necessity to return the equipment to the factory, saving
valuable time.
MR6000-MAX
MR6000-MAX promotion bundle
Promotion bundle with 20%1) discount, including MR6000-01 Memory Recorder, U8332 SSD Unit and Z5021 Probe Power Unit
PW8001
PW8001 - High Precision Power Analyzer
High precision power analyzer for power converter and inverter efficiency analysis, ±0.03% basic accuracy, 15 MHz sampling rate, 18-bit conversion, automatic phase shift correction for HIOKI current sensors, 1 ms data update rate and excellent noise resistivity of 110 dB @ 100 kHz.Technical details:Basic power accuracy ±0.03%8 power channels combined with motor analysisExcellent noise resistivity of 110 dB @ 100 kHz5 MHz frequency measurement band for powerStable and accurate measurement at 1 ms data update rateFunctions:8 power channels in combination with motor analysis for dual drivetrain analysisUnique power range with 2 A to 2 kA high accuracy HIOKI current sensorsPlug & Play connectivity with HIOKI current sensorsAutomatic Phase Shift Correction secures accurate high-frequency power measurementVisualize high-frequency loss with Power Spectrum Analysis measurementApplications:R&D and production line testing of high efficiency power converters and invertersLoss measurement of transformers and other inductive components under loadMotor efficiency measurementDetailed Description:The HIOKI PW8001 Power Analyzer is a state-of-the-art measurement instrument designed for the most demanding power analysis tasks, providing precise measurement results when evaluating efficiency of latest high accuracy electrical devices and systems. The PW8001 has 8 slots for power input units, which all can be used in combination with the motor analysis function.For the configuration of the PW8001, two types of input units are available that can freely be combined in one instrument according to the application requirements.The U7005 High Bandwidth input unit offers ultimate precision with ±0.03% basic accuracy, a sampling frequency of 15 MHz, 18-bit A/D conversion and a maximum input voltage of 1000 VAC. It is suitable for applications such as efficiency measurements of SiC and GaN based inverters motor drives, and accurate inductor loss measurement of inductors under load. Excellent resistivity for external noise of 110 dB at 100 kHz, ensure accurate and stable results even in the proximity to high frequency power switching semiconductors.
For high-voltage applications, the U7001 input unit provides ±0.07% basic accuracy, a maximum input voltage of 1500 VDC, a sampling frequency of 2.5 MHz, 16-bit A/D conversion and a maximum voltage to ground of 1500 VDC CAT II. It is a suitable unit for applications which need less bandwidth, such as testing of the efficiency of industrial motor drives using IGBTs, or wind turbines and PV power converters.
Combined with HIOKI’s extensive lineup of high-accuracy and high-bandwidth current sensors, probes and direct connection current boxes, the PW8001 offers a unique and comprehensive solution for reliably measuring applications from small electronic devices to large-scale power systems.
The PW8001 power analyzer and the current sensors are developed and produced by HIOKI, making the advanced automatic phase shift correction function possible. This ensures accurate phase angle measurement between the voltage and current, even at high frequencies and low power factors.
The PW8001 offers the unique Power Spectrum Analysis function. While the traditional FFT function determines the harmonics based on the fundamental frequency, limiting the frequency range, this new function covers the entire frequency spectrum of the analyzer. The Power Spectrum Analysis function delivers quick visibility into the high frequency power, providing developers with valuable data for further system efficiency improvements.
Other advanced functions like wideband harmonic analysis, and motor analysis, ensure precise and reliable power analysis results for a wide range of applications in the power electronics industry, such as the development of high efficiency power converters, electrical drivetrains and electrical motors.
The 1 ms update rate enables high-speed data refresh, allowing precise detection and analysis of rapid power fluctuations, such as those occurring during battery charging or discharging in EVs. This feature ensures unprecedented updates without compromising on measurement accuracy.
The optical link function allows the connection of two PW8001 power analyzers to increase the maximum number of measurement channels to 16. It enables synchronized power measurements and efficiency calculation from multiple inputs, optimizing measurement setup and eliminating timing differences in data collection because the sampling of all inputs is synchronized.
MR6000
MR6000 - 32-channel modular memory recorder, 200 MS/s, 1000V, touchscreen
Modular memory recorder, up to 32 channels, max. sampling rate 200 MS/s, max 1000 VDC isolated direct voltage input, up to 256 GB storage with SSD option, intuitive user interface, touchscreen, real-time waveform calculation and real-time saving
PW3390
PW3390 - Portable 4-channel Power Analyzer
Portable 4-channel Power Analyzer, ±0.09% basic accuracy, DC to 200 kHz measurement
band for power, 16-bit conversion, phase shift correction for HIOKI current sensors, 50 ms
data update rate, 16-ch waveform/analog output, motor analysis function, WLTP compliant Banner Specs: ±0.09% basic power accuracy 4 power channels 200 kHz measurement band for power50 ms data update rate 1500 V max. input voltage USPs: - Approved for WLTP testing - Small and lightweight 4-channel power analyzer with motor analysis Applications: WLTP testing Inverter efficiency measurements Motor efficiency measurements Solar power converter efficiency measurements
Model
D/A Output
Motor Analysis
PW3390-01
☐
☐
PW3390-02
☒
☐
PW3390-03
☒
☒
In detail:The HIOKI PW3390 Power Analyzer is a compact, lightweight, 4-channel high-precision
instrument designed to meet the demands of power and efficiency analysis across industries.
Equipped with advanced features, this analyzer excels in measuring and analyzing electrical
power and energy, making it an ideal solution for development, production, and field testing.Built for precision, the PW3390 delivers highly accurate power measurements with a basic
accuracy of ±0.09%, ensuring reliable data for various applications. Its 4 power channels
enable simultaneous multi-system evaluations with a frequency measurement band of up to
200 kHz for power.The instrument's harmonic analysis capabilities, featuring a data refresh time of 50 ms, allow
users to study transient states and evaluate noise or harmonic interference up to 100 kHz.With motor analysis functionality, the PW3390 is perfect for motor and inverter efficiency
evaluations. It provides measurements for torque, rotation speed, slip, and mechanical
power, enabling comprehensive performance analysis of industrial drives. Multiple PW3390 units can be connected to operate as a coordinated measurement system
with up to 32 channels. One unit serves as the primary controller, synchronizing the timing
across all devices to ensure simultaneous data acquisition. For long-term monitoring, the PW3390 can be equipped with the D/A output function, offering
a 16-channel analog output. The first 8 channels can be configured to output waveforms of
all voltage and current inputs at an update rate of 500 kS/s. The remaining 8 channels can be
assigned to numeric measurement values of basic parameters like U1, I2, and P4, with an
update rate of 20 S/s. The PW3390 is ideally suited for use in the automotive sector, particularly for efficiency
analyses of inverters in hybrid and electric vehicles, as well as for standardized testing
procedures to determine energy consumption like WLTP (Worldwide Harmonized Light
Vehicles Test Procedure). It also excels in renewable energy and power conversion
applications, providing precise input and output power data for power conditioners.Designed with a user-friendly interface and a rugged build, the HIOKI PW3390 ensures
intuitive operation and durability in industrial settings. Whether analyzing WLTP efficiency for
(H)EVs, transient power, harmonics, or inverter and motor efficiency, the HIOKI PW3390
delivers outstanding performance and accuracy
More than specs – find more details here:🔗 Zero-flux Current Clamps: Accuracy without effort from mA to kA
RM2610
RM2610 - Measurement System for LIB battery electrode sheets
Electrode Resistance Measurement System, isolates and quantifies the composite layer resistivity and the interface resistance between the composite layer and the aluminum or copper current collector foil of LIB electrode sheets in a single measurement
LR8102
LR8102 - Modular multi-channel Data Logger for system integration, optical sync, UDP, CAN
The versatile, modular data logger LR8102 can be used in combination with a variety of modules. It is therefore the perfect solution for integration in applications requiring multiple channels and recording intervals as short as 5 ms.
M1100
M1100 - AC Power Supply Module for M7103 Power Module
Dedicated AC Power Supply Module for M7103 Power Module, powers up to four M7103 modules,
100 V to 240 V. Banner Specs (= Attributes): For max. 4x M7103 modules 100 V to 240 V, 50/60 Hz In detail:The M1100 is an AC power supply module specifically designed to provide power to up to four M7103
Power Modules. It can be connected to AC voltage from 100 V to 240 V at 50/60 Hz.
M7103
M7103 - 3-channel power measurement module for LR810x Data Logger Series
Power measurement module for LR8101 and LR8102 Data Logger, up to 1500 VDC, CATII
and 2000 A, 3 power channels, max. update interval 5 ms, DC to 100 kHzBanner Specs: Up to 12 / 120 power channels Power accuracy: 0.02% rdg. ± 0.05% f.s. 1500 VDC / 1000 VAC, CATII 5 ms update interval DC to 100 kHz bandwidth USPs: Multi-channel power measurement with the accuracy of a top-end power analyzer Guaranteed high accuracy up to 1500 VDC, CATII Combine with wide variety of HIOKI current sensors with ratings from 2 A to 2000 ASpace-efficient multi-channel setup Easily expand channels on site with growing production line requirements Applications: Power measurement applications requiring higher number of channels Development of Photovoltaic (PV) string inverters Quality inspection of PV string inverters during productionCharge/discharge testing during development of battery modules and battery packsIn detail: The M7103 power measurement module for LR810x data loggers offers three channels for
highly accurate power logging. One LR8101 or LR8102 Data Logger in combination with the
M1100 AC power supply module supports up to four M7103 modules, giving the user the ability
to log up to 12 power channels simultaneously with one logger. Up to 120 power channels can
be recorded by synchronizing multiple LR8102 Data Logger. The voltage input channels are designed for direct input of voltages of up 1500 VDC or 1000
VAC, CATII making the M7103 ideal for safe and reliable production line testing. All HIOKI highprecision current sensors with an ME15W connector can be combined with the M7103 power measurement module, offering users the flexibility to choose the ideal current sensor for their
specific application. With an update interval of just 5 ms, the module enables detailed logging
of power, voltage, or current with exceptional precision.The sync source sharing feature ensures precise efficiency measurement by using the AC
signal's zero-crossing for calculation to synchronize a primary module with secondary
modules, making the system ideal for high-accuracy applications like quality inspection in PV
string inverter production. This highly flexible logger system offers the possibility to easily
expand channels on-site without the necessity to return the equipment to the factory, saving
valuable time.
MR6000-MAX
MR6000-MAX promotion bundle
Promotion bundle with 20%1) discount, including MR6000-01 Memory Recorder, U8332 SSD Unit and Z5021 Probe Power Unit
PW8001
PW8001 - High Precision Power Analyzer
High precision power analyzer for power converter and inverter efficiency analysis, ±0.03% basic accuracy, 15 MHz sampling rate, 18-bit conversion, automatic phase shift correction for HIOKI current sensors, 1 ms data update rate and excellent noise resistivity of 110 dB @ 100 kHz.Technical details:Basic power accuracy ±0.03%8 power channels combined with motor analysisExcellent noise resistivity of 110 dB @ 100 kHz5 MHz frequency measurement band for powerStable and accurate measurement at 1 ms data update rateFunctions:8 power channels in combination with motor analysis for dual drivetrain analysisUnique power range with 2 A to 2 kA high accuracy HIOKI current sensorsPlug & Play connectivity with HIOKI current sensorsAutomatic Phase Shift Correction secures accurate high-frequency power measurementVisualize high-frequency loss with Power Spectrum Analysis measurementApplications:R&D and production line testing of high efficiency power converters and invertersLoss measurement of transformers and other inductive components under loadMotor efficiency measurementDetailed Description:The HIOKI PW8001 Power Analyzer is a state-of-the-art measurement instrument designed for the most demanding power analysis tasks, providing precise measurement results when evaluating efficiency of latest high accuracy electrical devices and systems. The PW8001 has 8 slots for power input units, which all can be used in combination with the motor analysis function.For the configuration of the PW8001, two types of input units are available that can freely be combined in one instrument according to the application requirements.The U7005 High Bandwidth input unit offers ultimate precision with ±0.03% basic accuracy, a sampling frequency of 15 MHz, 18-bit A/D conversion and a maximum input voltage of 1000 VAC. It is suitable for applications such as efficiency measurements of SiC and GaN based inverters motor drives, and accurate inductor loss measurement of inductors under load. Excellent resistivity for external noise of 110 dB at 100 kHz, ensure accurate and stable results even in the proximity to high frequency power switching semiconductors.
For high-voltage applications, the U7001 input unit provides ±0.07% basic accuracy, a maximum input voltage of 1500 VDC, a sampling frequency of 2.5 MHz, 16-bit A/D conversion and a maximum voltage to ground of 1500 VDC CAT II. It is a suitable unit for applications which need less bandwidth, such as testing of the efficiency of industrial motor drives using IGBTs, or wind turbines and PV power converters.
Combined with HIOKI’s extensive lineup of high-accuracy and high-bandwidth current sensors, probes and direct connection current boxes, the PW8001 offers a unique and comprehensive solution for reliably measuring applications from small electronic devices to large-scale power systems.
The PW8001 power analyzer and the current sensors are developed and produced by HIOKI, making the advanced automatic phase shift correction function possible. This ensures accurate phase angle measurement between the voltage and current, even at high frequencies and low power factors.
The PW8001 offers the unique Power Spectrum Analysis function. While the traditional FFT function determines the harmonics based on the fundamental frequency, limiting the frequency range, this new function covers the entire frequency spectrum of the analyzer. The Power Spectrum Analysis function delivers quick visibility into the high frequency power, providing developers with valuable data for further system efficiency improvements.
Other advanced functions like wideband harmonic analysis, and motor analysis, ensure precise and reliable power analysis results for a wide range of applications in the power electronics industry, such as the development of high efficiency power converters, electrical drivetrains and electrical motors.
The 1 ms update rate enables high-speed data refresh, allowing precise detection and analysis of rapid power fluctuations, such as those occurring during battery charging or discharging in EVs. This feature ensures unprecedented updates without compromising on measurement accuracy.
The optical link function allows the connection of two PW8001 power analyzers to increase the maximum number of measurement channels to 16. It enables synchronized power measurements and efficiency calculation from multiple inputs, optimizing measurement setup and eliminating timing differences in data collection because the sampling of all inputs is synchronized.