CM4375-50 - AC/DC Clamp Multimeter, 1000 A

€528.00*

Content: 1 Each

Prices excl. VAT plus shipping costs

In stock, delivery time: Ready for dispatch

Available stock: 2

Product details

Product number: CM4375-50

EAN: 4536036013562

Width: 350 mm

Height: 2420 mm

Weight: 0.72 kg

Product information "CM4375-50 - AC/DC Clamp Multimeter, 1000 A"

The CM4375-50 is a 1000A True RMS AC/DC clamp meter, designed with a special slim clamp for easy access to tight spaces. It is suitable for use in environments rated CAT III 1000V, CAT IV 600V, and features IP54 protection. The meter provides a comprehensive range of measurement functions, including voltage, current, resistance, frequency, capacitance, inrush current, max/min/avg/peak values, continuity test, diode test, automatic AC/DC detection, DC current, and DC voltage polarity detection, among others. With the optional P-2000 accessory, the DC voltage measuring range can be extended to 2000V. The device is also prepared for Bluetooth communication, with the Z3210 module required for wireless data transmission.

Technical Details:

Measuring range: 1000A (True RMS AC/DC)
Measurement functions: Voltage, current, resistance, frequency, capacitance, inrush current, max/min/avg/peak, continuity test, diode test, automatic AC/DC detection, DC current, DC voltage polarity detection
Measurement categories: CAT III 1000V, CAT IV 600V
Environmental protection: IP54
Additional features: Bluetooth communication-ready (Z3210 module required)
Optional accessory: P2000 (extends DC voltage range to 2000V)

CM4375-50
Test Lead L9300
Carrying Case C0203
2x AAA-size alkaline battery (LR03)
Instruction Manual
Operating Precautions

Optional accessories

L9300

L9300 - TEST LEAD

The L9300 measuring lead set is an optional accessory for Hioki DMMs and is suitable for current measurements up to 10A. The Test Lead L9300 incorporates integrated caps for greater convenience and safety. The design lets you change the measurement category simply by sliding the test lead’s protective finger guard, eliminating the need to worry about losing caps. Technical Details: Test Lead Ratings: o CAT IV: 600V o CAT III: 1000V o CAT II: 1000V Maximum Current: 10A Length of lead (total): 955 mm ± 20

€38.00*

L4933

L4933 - CONTACT PIN SET

The L4933 Test Probe Set is fully insulated except for the front part of the tip. It can be fitted to Hioki's L9207-30, L9208, L9170-10 and DT4911 test leads and is an optional accessory for many Hioki multimeters and current clamps. Technical Details: Max Voltage: 60V DC, 30V AC Max Current: 3ALength over all: 95mm Tip length: 48mm Tip diameter (isolated section): 1.3mm Tip diameter (contact part): 1.0mm Tip blank part: 3mm Tip surface: gilded Compatible Multimeters: 3030-10, DM7275, DM7276, DT4223, DT4224, CM4141, CM4371, CM4373, CM4375, DT4223, DT4224, DT4261, DT4281, DT4282 Compatible Clamp Meters: 3280-10F, 3280-70F, CM3281, CM3289, CM3291, CM4141, CM4371, CM4373, CM4375

€18.00*

L4934

L4934 - SMALL ALLIGATOR CLIP SET

The L4934 set of small alligator clips is designed to attach to Hioki test probes and test leads with 2 mm tip diameter of the test probes and an optional accessory for many Hioki Multimeters and Clamp Meters. Technical Details: Imax = 3A Max. conductor diameter = 4mm Required Tip diameter: 2mm Attachable to: Test leads L9207, L9208, L9170-10, DT4911, test leads of DT4253, DT4255, DT4256, DT4261, DT4281, DT4282- multimeters. Compatible Multimeters: 3030-10, DM7275, DM7276, DT4223, DT4224, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282 Compatible Clamp Meters: 3280-10F, 3280-70F, CM3281, CM3286, CM3289, CM3291, CM4141, CM4371, CM4373, CM4375

€18.00*

Z3210

Z3210 - Bluetooth Adapter

The Z3210 Bluetooth Adapter allows wireless communication between compatible HIOKI products, enabling easy data transfer and remote operation. List of compatible Hioki products: Battery Tester BT3554-50 AC Clamp Power Meter CM3286-50 AC Leakage Clamp Meter CM4001, CM4002, CM4003 AC Clamp Meter CM4141-50 AC/DC Clamp Meters CM4371-50, CM4373-50, CM4375-50 Digital Multimeter DT4261 Clamp On Earth Tester FT6380-50 Earth Tester FT6031-50 Insulation Tester IR4057-50

€108.00*

Optional for Test leads

L4930

L4930 - CONNECTION CABLE SET

The cable set contains two cables (red and black) usable for the DT4280/DT4250 multimeter series to connect with L493x series test pins and clips. Technical Details: 1.2 m length CATIV 600V, CATIII 1000V Contact protection Contact diameter 4 mm (Banana plug) Protective caps

€18.00*

20 %

L4931

L4931 - EXTENSION CABLE SET

L4931 is a set of cables for extending Hioki test or voltage leads with banana plugs, including touch-proof variants. Technical Specifications:Length: 1.5 m (4.92 ft) Compatible with Hioki products: L1000, L4930, L4940, L9438, P9000, DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM4141, CM4371, CM4373, CM4375

€14.40* €18.00*

20 %

L4932

L4932 - TEST PIN SET

The L4932 Test pin set is an optional accessory for many Hioki Multimeters and Clamp Meters. It is attachable to the Hioki measurement lead L4930 and similar. A special feature is the posibility to attach the small alligator clip L4934 to the tip of the L4932. Technical details: Cattegory: CAT III 1000V Imax: 10A Feature: L4934 attachable Compatible Multimeters: DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282 Compatible Clamp Meters: CM3286, CM4141, CM4371, CM4373, CM4375

€14.40* €18.00*

L4934

L4934 - SMALL ALLIGATOR CLIP SET

€18.00*

L4935

L4935 - ALLIGATOR CLIP SET

The Hioki L4935 Alligator Clip Set is arranged for use with Hioki L4930 or L4940 test leads and it is an optional accessory for many Hioki Multimeters and Clamp Meters. With a 4 mm banana plug connection, these clips provide a secure and reliable attachment for general measurement tasks. Their robust construction ensures accurate measurements even in demanding environments, while the universal design allows for compatibility with various banana plug based test leads. Technical Information: Category: CAT IV 600 V, CAT III 1000 V Conductor Diameter: Max. 25 mmMax Current: 10 A Connector Type: 4 mm Banana Plug Compatible Multimeters: DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282 Compatible Clamp Meters: CM3286, CM4141, CM4371, CM4373, CM4375

€18.00*

L4937

L4937 - Magnetic Adapter Set

The L4937 Magnetic Adapter Set is designed for use with L4930 and L4940 test leads as well as the DT4280/DT4250 multimeters. It accommodates 4mm banana plugs and is compatible with M6 pan screws. This adapter set ensures secure and reliable connections in measurement setups. It is rated for CAT III 1000V, making it suitable for a wide range of electrical testing environments. Technical Details: Compatibility: L4930 and L4940 test leads, DT4280/DT4250 multimeters Fits: 4mm banana plugs Screw compatibility: M6 pan screws Measurement category: CAT III 1000V

€98.00*

9804

9804 - MAGNETIC ADAPTER

The magnetic adapter 9804 is an optional accessory for all kind of FMI and PMI products that uses 4mm banana plug voltage cords. The adaptor is compatible to M6 pan screws. Technical details: Set of 9804-01 and 9804-02 (red/black) Compatible to 4mm banana plugs

€78.00*

L4938

L4938 - TEST PIN SET

The L4938 isna Test pin set for banana plug equipped test cords like the Hioki L4930 and accesory test leads of the Hioki Digital Multi Meters and Clamp Meters. Safety laboratory test leads with 4 mm banana plugs and sliding sleeves can also be used.Technical Details: Imax = 10A Category: CAT II (Tip cover removed), CAT III 600V (Tip cover attached) Tip diameter: 1.8 mm Connector: 4 mm banana jack Digital Multi Meters and Clamp Meters: DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM3286, CM4141, CM4371, CM4373, CM4375

€18.00*

20 %

L4939

L4939 - BREAKER PIN SET

L4939 is a Test Tip set for measurement at interrupter/breaker - units. It is attachable to the Hioki L4930 measurement leads and similar products equipped with 4 mm banana plugs. It is an optional accessory for Hioki Digital Multimeters and Clamp Meters with 4mm banana type terminals. Technical Details: Cattegory: CAT IV 1000 V Imax = 10A Length: 128 mm Tip Diameter: 2.6 mm Compatible Multimeters and Clamp Meters: DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM3286, CM4141, CM4371, CM4373, CM4375

€30.40* €38.00*