DT4261 - DIGITAL MULTIMETER

Z5050

The Z5050 is a set of replacement fuses (5 pieces) for HIOKI's BT3554 Portable Battery Testers. The set includes Littelfuse ceramic fuses, type 0216.630TXP. It is essential to use only this specific fuse type when replacing fuses in the BT3554, as using other types may damage the device in the event of a surge. For use with: BT3554-50, BT3554-51, BT3554-52, BT3554-91, BT3554-92Also compatible with: BT3554, BT3554-01, BT3554-10, BT3554-11

€18.00*

L4936

L4936 - Terminals for busbars

The L4936 set is a versatile accessory for all Hioki products that are suitable for measurements on busbars and where the available large crocodile clips are not able to make safe contact with the current-carrying cable or busbar, or where there is a risk of touching current conductors that carry a high voltage. Technical data: Length: 153 mm Maximum cable size: 30 mm Voltage safety category: CAT III 600V Imax: 5 A Compatible cables: L4930, L4940, banana cables corresponding to the CAT level and Imax level of L4936 Compatible products: P9000, DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM3286, CM4141, CM4371, CM4373, CM4375

€88.00*

L4937

L4937 - Magnetic Adapter Set

The L4937 Magnetic Adapter Set is designed for use with L4930 and L4940 test leads as well as the DT4280/DT4250 multimeters. It accommodates 4mm banana plugs and is compatible with M6 pan screws. This adapter set ensures secure and reliable connections in measurement setups. It is rated for CAT III 1000V, making it suitable for a wide range of electrical testing environments. Technical Details: Compatibility: L4930 and L4940 test leads, DT4280/DT4250 multimeters Fits: 4mm banana plugs Screw compatibility: M6 pan screws Measurement category: CAT III 1000V

€98.00*

L4938

L4938 - TEST PIN SET

The L4938 isna Test pin set for banana plug equipped test cords like the Hioki L4930 and accesory test leads of the Hioki Digital Multi Meters and Clamp Meters. Safety laboratory test leads with 4 mm banana plugs and sliding sleeves can also be used.Technical Details: Imax = 10A Category: CAT II (Tip cover removed), CAT III 600V (Tip cover attached) Tip diameter: 1.8 mm Connector: 4 mm banana jack Digital Multi Meters and Clamp Meters: DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM3286, CM4141, CM4371, CM4373, CM4375

€18.00*

Z3210

Z3210 - Bluetooth Adapter

Der Bluetooth-Adapter Z3210 ermöglicht die drahtlose Kommunikation zwischen kompatiblen HIOKI-Produkten und damit eine einfache Datenübertragung und Fernsteuerung.

€108.00*

9132-50

9132-50 - AC Current Probe

The 9132-50 Clamp-on Probe is a versatile current sensor designed for accurate AC current measurements up to 1000 A. This clamp-on probe allows for non-intrusive measurements on live wires without needing to cut the conductor, making it ideal for industrial applications, power distribution analysis, and electrical diagnostics.The 9132-50 features a wide conductor diameter capacity and a BNC connector for easy integration with recorders or testers, ensuring high precision and ease of use.Technical Details: Measuring Range: 20/50/100/200/500/1000 A AC Output Voltage: 0.2 V full scale Maximum Rated Current: 1000 A rms Maximum Rated Voltage to Earth: 600 V AC (CAT III) Conductor Diameter: Less than 55 mm, or 80 mm × 20 mm busbar Basic Accuracy (45 Hz to 66 Hz): ±3% rdg. ±0.2% f.s.Frequency Characteristics: 40 Hz to 1 kHz, adds ±1% to basic accuracy Output Resistance: 160 Ω ±10% (20 A range) Dimensions: 100 mm (W) × 224 mm (H) × 35 mm (D) Weight: Approx. 600 g Cable Length: Approx. 3 m Output Connector: BNC Operating Temperature: -10°C to 50°C Storage Temperature: -10°C to 60°C

€268.00*

9010-50

9010-50 - AC Current Probe

Economical Clamp Sensor for waveform recording, 40 to 1kHz, 10 to 500 A AC, +/-2%rdg. +/-1%f.s., 6 ranges, 46 mm core diameter, BNC output terminal

€158.00*

9018-50

9018-50 - AC Current Probe

Superior Clamp Sensor for waveform recording and analyzing harmonics, 40 Hz to 3 kHz, 10 to 500A AC, +/-1.5%rdg. +/-0.1%f.s., 46 mm diameter, BNC output terminal

€318.00*

C0201

C0201 - Fixed carrying case for FT342x and DT4250 series

This universal digital multimeter DT4261-90 features a 10A direct input, which can be expanded to 1kA with an optional Hioki current clamp. It supports the measurement of AC/DC current and voltage (True RMS), resistance, and capacitance. Additionally, it offers functions such as continuity and diode testing. The multimeter is equipped with a 4-digit LCD (6000 counts) and includes automatic range selection, a filter function, hold function, auto-hold, MAX/MIN/AVG value display, relative value display, and an automatic power-saving function (APS). USB communication is supported via an optional adapter. Safety features include misconnection prevention shutters to prevent incorrect insertion of test leads. The device is classified for measurement categories CAT III 1000V and CAT IV 600V. The basic accuracy is 0.9%/0.15% for AC/DC voltage and 1.4%/0.5% for AC/DC current. The Z3210 module for wireless Bluetooth® communication is included in the package. Technical Details: Measurement range: 10A direct input, expandable to up to 1kA (with Hioki current clamp) Measurement functions: AC/DC current, voltage (True RMS), resistance, capacitance, continuity test, diode test Display: 4-digit LCD (6000 counts) Functions: Automatic range selection, filter function, hold function, auto-hold, MAX/MIN/AVG value display, relative value display, automatic power-saving function (APS) Safety: Misconnection prevention shutters Communication: USB (optional, adapter required), Bluetooth® (Z3210 module included) Measurement categories: CAT III 1000V, CAT IV 600V Basic accuracy: Voltage AC/DC: 0.9%/0.15% Current AC/DC: 1.4%/0.5%

€38.00*

C0202

C0202 - CARRYING CASE

The C0202 soft carrying case is specifically designed for HIOKI DT428x, DT425x, DT421x Digital Multimeters, and HIOKI FT3424 and FT3425 Lux Meters. It provides compact and protective storage, ensuring easy transportation for these instruments. Technical Details: • C0202 Soft Carrying Case: Fits HIOKI DT428x, DT425x, DT421x Digital Multimeters, and FT3424/FT3425 Lux Meters

€38.00*

9804

9804 - MAGNETIC ADAPTER

The magnetic adapter 9804 is an optional accessory for all kind of FMI and PMI products that uses 4mm banana plug voltage cords. The adaptor is compatible to M6 pan screws. Technical details: Set of 9804-01 and 9804-02 (red/black) Compatible to 4mm banana plugs

€78.00*

9704

9704 - Adapter BNC socket

The 9704 is a versatile banana to BNC conversion adapter accessory wherever this is required. It is suitable for example for Hioki digital multimeters where current probes can be connected, or where a banana to BNC test lead conversion is required for measurement applications.Dimensions: 63W×33H×13D mmConnector configuration: 2x Banana male, 1x BNC female Distance between banana plugs: 19 mmVoltage protection category: CAT III 600VCompatible AC clamp and flexible probes: 9010-50, 9018-50, 9132-50, CT9667-01, CT9667-02, CT9667-03 Compatible Digital Multimeters: DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282 Others: Connection Cable L9097

€28.00*

DT4900-01

DT4900-01 - COMMUNICATION PACKAGE (USB)

The Hioki DT4900-01 Communication Package enables seamless data transfer between compatible Hioki digital multimeters and a PC. It includes the essential communication cable for USB connection and allows users to remotely control measurement settings, view data in real-time, and export results to CSV or Excel. This tool is essential for professionals needing efficient data analysis and control. Technical Details: USB communication cable Real-time data viewing and control CSV/Excel export functionality Compatible with DT4250, DT4280, DT4261 series multimeters

€128.00*

L4930

L4930 - CONNECTION CABLE SET

The cable set contains two cables (red and black) usable for the DT4280/DT4250 multimeter series to connect with L493x series test pins and clips. Technical Details: 1.2 m length CATIV 600V, CATIII 1000V Contact protection Contact diameter 4 mm (Banana plug) Protective caps

€18.00*

L4933

L4933 - CONTACT PIN SET

The L4933 Test Probe Set is fully insulated except for the front part of the tip. It can be fitted to Hioki's L9207-30, L9208, L9170-10 and DT4911 test leads and is an optional accessory for many Hioki multimeters and current clamps. Technical Details: Max Voltage: 60V DC, 30V AC Max Current: 3ALength over all: 95mm Tip length: 48mm Tip diameter (isolated section): 1.3mm Tip diameter (contact part): 1.0mm Tip blank part: 3mm Tip surface: gilded Compatible Multimeters: 3030-10, DM7275, DM7276, DT4223, DT4224, CM4141, CM4371, CM4373, CM4375, DT4223, DT4224, DT4261, DT4281, DT4282 Compatible Clamp Meters: 3280-10F, 3280-70F, CM3281, CM3289, CM3291, CM4141, CM4371, CM4373, CM4375

€18.00*

L4934

L4934 - SMALL ALLIGATOR CLIP SET

The L4934 set of small alligator clips is designed to attach to Hioki test probes and test leads with 2 mm tip diameter of the test probes and an optional accessory for many Hioki Multimeters and Clamp Meters. Technical Details: Imax = 3A Max. conductor diameter = 4mm Required Tip diameter: 2mm Attachable to: Test leads L9207, L9208, L9170-10, DT4911, test leads of DT4253, DT4255, DT4256, DT4261, DT4281, DT4282- multimeters. Compatible Multimeters: 3030-10, DM7275, DM7276, DT4223, DT4224, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282 Compatible Clamp Meters: 3280-10F, 3280-70F, CM3281, CM3286, CM3289, CM3291, CM4141, CM4371, CM4373, CM4375

€18.00*

L4935

L4935 - ALLIGATOR CLIP SET

The Hioki L4935 Alligator Clip Set is arranged for use with Hioki L4930 or L4940 test leads and it is an optional accessory for many Hioki Multimeters and Clamp Meters. With a 4 mm banana plug connection, these clips provide a secure and reliable attachment for general measurement tasks. Their robust construction ensures accurate measurements even in demanding environments, while the universal design allows for compatibility with various banana plug based test leads. Technical Information: Category: CAT IV 600 V, CAT III 1000 V Conductor Diameter: Max. 25 mmMax Current: 10 A Connector Type: 4 mm Banana Plug Compatible Multimeters: DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282 Compatible Clamp Meters: CM3286, CM4141, CM4371, CM4373, CM4375

€18.00*

L9207-10

L9207-10 - Measuring lead set red/black

The L9207-10 is a universal test lead for many Hioki Digital Multimeters and Clamp Meters 4mm banana type terminals. Technical information: Cable length: 900 mm Connector type: angeled banana plug 4mm Handle length: 137 mm (incl. tip length) Tip length (cover removed): 17.5 mm Tip Diameter: 2 mm Voltage safety category: CAT IV 600V, CAT III 1000V (with tip cover), CAt II 1000V (tip cover removed)Max. Current: 10 A Others: Tip cover gilded Compatible Products: DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM3286, CM4141, CM4371, CM4373, CM4375

€38.00*

L9300

L9300 - TEST LEAD

The L9300 measuring lead set is an optional accessory for Hioki DMMs and is suitable for current measurements up to 10A. The Test Lead L9300 incorporates integrated caps for greater convenience and safety. The design lets you change the measurement category simply by sliding the test lead’s protective finger guard, eliminating the need to worry about losing caps. Technical Details: Test Lead Ratings: o CAT IV: 600V o CAT III: 1000V o CAT II: 1000V Maximum Current: 10A Length of lead (total): 955 mm ± 20

€38.00*

Z5050

Z5050 - Spare Fuses for BT3554

The Z5050 is a set of replacement fuses (5 pieces) for HIOKI's BT3554 Portable Battery Testers. The set includes Littelfuse ceramic fuses, type 0216.630TXP. It is essential to use only this specific fuse type when replacing fuses in the BT3554, as using other types may damage the device in the event of a surge. For use with: BT3554-50, BT3554-51, BT3554-52, BT3554-91, BT3554-92Also compatible with: BT3554, BT3554-01, BT3554-10, BT3554-11

€18.00*

L4936

L4936 - Terminals for busbars

The L4936 set is a versatile accessory for all Hioki products that are suitable for measurements on busbars and where the available large crocodile clips are not able to make safe contact with the current-carrying cable or busbar, or where there is a risk of touching current conductors that carry a high voltage. Technical data: Length: 153 mm Maximum cable size: 30 mm Voltage safety category: CAT III 600V Imax: 5 A Compatible cables: L4930, L4940, banana cables corresponding to the CAT level and Imax level of L4936 Compatible products: P9000, DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM3286, CM4141, CM4371, CM4373, CM4375

€88.00*

L4937

L4937 - Magnetic Adapter Set

The L4937 Magnetic Adapter Set is designed for use with L4930 and L4940 test leads as well as the DT4280/DT4250 multimeters. It accommodates 4mm banana plugs and is compatible with M6 pan screws. This adapter set ensures secure and reliable connections in measurement setups. It is rated for CAT III 1000V, making it suitable for a wide range of electrical testing environments. Technical Details: Compatibility: L4930 and L4940 test leads, DT4280/DT4250 multimeters Fits: 4mm banana plugs Screw compatibility: M6 pan screws Measurement category: CAT III 1000V

€98.00*

L4938

L4938 - TEST PIN SET

The L4938 isna Test pin set for banana plug equipped test cords like the Hioki L4930 and accesory test leads of the Hioki Digital Multi Meters and Clamp Meters. Safety laboratory test leads with 4 mm banana plugs and sliding sleeves can also be used.Technical Details: Imax = 10A Category: CAT II (Tip cover removed), CAT III 600V (Tip cover attached) Tip diameter: 1.8 mm Connector: 4 mm banana jack Digital Multi Meters and Clamp Meters: DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM3286, CM4141, CM4371, CM4373, CM4375

€18.00*

Z3210

Z3210 - Bluetooth Adapter

Der Bluetooth-Adapter Z3210 ermöglicht die drahtlose Kommunikation zwischen kompatiblen HIOKI-Produkten und damit eine einfache Datenübertragung und Fernsteuerung.

€108.00*

9132-50

9132-50 - AC Current Probe

The 9132-50 Clamp-on Probe is a versatile current sensor designed for accurate AC current measurements up to 1000 A. This clamp-on probe allows for non-intrusive measurements on live wires without needing to cut the conductor, making it ideal for industrial applications, power distribution analysis, and electrical diagnostics.The 9132-50 features a wide conductor diameter capacity and a BNC connector for easy integration with recorders or testers, ensuring high precision and ease of use.Technical Details: Measuring Range: 20/50/100/200/500/1000 A AC Output Voltage: 0.2 V full scale Maximum Rated Current: 1000 A rms Maximum Rated Voltage to Earth: 600 V AC (CAT III) Conductor Diameter: Less than 55 mm, or 80 mm × 20 mm busbar Basic Accuracy (45 Hz to 66 Hz): ±3% rdg. ±0.2% f.s.Frequency Characteristics: 40 Hz to 1 kHz, adds ±1% to basic accuracy Output Resistance: 160 Ω ±10% (20 A range) Dimensions: 100 mm (W) × 224 mm (H) × 35 mm (D) Weight: Approx. 600 g Cable Length: Approx. 3 m Output Connector: BNC Operating Temperature: -10°C to 50°C Storage Temperature: -10°C to 60°C

€268.00*

9010-50

9010-50 - AC Current Probe

Economical Clamp Sensor for waveform recording, 40 to 1kHz, 10 to 500 A AC, +/-2%rdg. +/-1%f.s., 6 ranges, 46 mm core diameter, BNC output terminal

€158.00*

9018-50

9018-50 - AC Current Probe

Superior Clamp Sensor for waveform recording and analyzing harmonics, 40 Hz to 3 kHz, 10 to 500A AC, +/-1.5%rdg. +/-0.1%f.s., 46 mm diameter, BNC output terminal

€318.00*

DT4261 DIGITAL MULTIMETER