CT9555 - SENSOR UNIT

Banner Specs: AC/DC currents up to 500 A Frequency Bandwidth DC to 200 kHzBasic accuracy: ±0.2% rdg. Operating temperature: -40 °C to 85 °C - Output voltage ratio 4 mV/A Applications:WLTP testing (Worldwide harmonized Light vehicles Test Procedure) on commercial vehiclesEvaluation of current consumption of automotive electrical components like air compressors or power steering systemsOn-site efficiency and current evaluation of inverters and motors In detail:The CT6845A AC/DC Current Clamp combines the flexibility of a clamp-style sensor with high-precision measurement, achieving a basic accuracy of ±0.2% rdg. This allows for easy, non-intrusive current measurement without breaking the circuit while maintaining the accuracy needed for precise power analysis in demanding applications. Utilizing advanced fluxgate technology, it ensures outstanding stability and accuracy in both AC and DC current measurements. With a maximum current rating of 500 A and a wide frequency bandwidth from DC to 200 kHz, it enables accurate detection of rapid current fluctuations. This capability makes it suitable for applications with demanding measurement requirements, such as automotive and power electronics industries. The current clamp delivers reliable performance across a wide temperature range of -40 °C to 85 °C, ensuring stability even in demanding environments such as engine compartments and outdoor testing locations. It is well-suited for evaluating the current consumption of automotive electrical components, including air compressors and power steering systems. Additionally, its high-accuracy clamp design allows for efficient on-site assessment of IGBT inverters (Insulated Gate Bipolar Transistors) and motor performance. Technicians can use it to conduct precise efficiency evaluations and current measurements, enabling them to quickly identify anomalies or performance degradation, ultimately supporting effective maintenance and diagnostics. Phase shift correction functions of HIOKI Power Analyzers are supported, including the automatic correction feature of the PW8001 Power Analyzer. By integrating these features, it ensures accurate power analysis in dynamic and high-frequency applications, minimizing measurement errors and enabling higher precision in power evaluation. Direct connection to HIOKI Power Analyzers and Memory Recorders is possible via the ME15W connector, which also supplies power to the CT6845A. Additionally, when combined with a HIOKI sensor unit (CT9555, CT9556, CT9557), it can be used with oscilloscopes and other data acquisition (DAQ) systems, providing a voltage output ratio of 4 mV/A. Furthermore, its robust construction, 50 mm core diameter, and 3-meter cable length allow for flexible installation in various test environments. The CT6845A is an essential tool for high-precision current measurement, including WLTP testing (Worldwide harmonized Light vehicles Test Procedure) on commercial vehicles. With a durable design, precise fluxgate technology, and adaptability to various operating environments, it provides reliable measurement performance across both laboratory and field applications.

Product Description for CT6876 AC/DC Current Sensor The CT6876 AC/DC Current Sensor is designed for accurate current measurements with a broad frequency range from DC to 1.5 MHz. With a rated current of 1000 A, it is ideal for demanding applications in industries such as inverter motors, electric vehicles, and power electronics.The sensor offers excellent noise resistance and high precision, making it a top choice for high-current, high-speed measurements. When combined with Hioki's Power Analyzers, it ensures accurate power conversion efficiency measurements, especially in high-frequency environments. Technical Details: Model: CT6876 Rated Current: 1000 A Frequency Bandwidth: DC to 1.5 MHzBasic Accuracy: Amplitude: ±0.04% rdg. ±0.008% f.s. Phase: ±0.1° Maximum Conductor Diameter: 36 mm Maximum Rated Voltage to Ground: 1000 V CAT III Operating Temperature: -40°C to 85°CInput Impedance Requirement: 1 MΩ or higher Output Terminal: ME15W

Banner Specs:  AC/DC currents up to 200 A Frequency Bandwidth DC to 700 kHz Basic accuracy: ±0.2% rdg. Operating temperature: -40 °C to 85 °COutput voltage ratio 10 mV/A Applications:WLTP testing (Worldwide harmonized Light vehicles Test Procedure) Evaluation of current consumption of automotive electrical components like air compressors or power steering systems On-site efficiency and current evaluation of inverters and motorsIn detail:The CT6843A AC/DC Current Clamp combines the flexibility of a clamp-style sensor with high-precision measurement, achieving a basic accuracy of ±0.2% rdg. This allows for easy, non-intrusive current measurement without breaking the circuit while maintaining the accuracy needed for precise power analysis in demanding applications. Utilizing advanced fluxgate technology, it ensures outstanding stability and accuracy in both AC and DC current measurements. With a maximum current rating of 200 A and a wide frequency bandwidth from DC to 700 kHz, it enables accurate detection of rapid current fluctuations. This capability makes it suitable for applications with demanding measurement requirements, such as automotive and power electronics industries. The current clamp delivers reliable performance across a wide temperature range of -40°C to 85°C, ensuring stability even in demanding environments such as engine compartments and outdoor testing locations. It is well-suited for evaluating the current consumption of automotive electrical components, including air compressors and power steering systems. Additionally, its high-accuracy clamp design allows for efficient on-site assessment of IGBT inverters (Insulated Gate Bipolar Transistors) and motor performance. Technicians can use it to conduct precise efficiency evaluations and current measurements, enabling them to quickly identify anomalies or performance degradation, ultimately supporting effective maintenance and diagnostics. Phase shift correction functions of HIOKI Power Analyzers are supported, including the automatic correction feature of the PW8001 Power Analyzer. By integrating these features, it ensures accurate power analysis in dynamic and high-frequency applications, minimizing measurement errors and enabling higher precision in power evaluation. Direct connection to HIOKI Power Analyzers and Memory Recorders is possible via the ME15W connector, which also supplies power to the CT6843A. Additionally, when combined with a HIOKI sensor unit (CT9555, CT9556, CT9557), it can be used with oscilloscopes and other data acquisition (DAQ) systems, providing a voltage output ratio of 10 mV/A. Furthermore, its robust construction, 20 mm core diameter, and 3-meter cable length allow for flexible installation in various test environments. The CT6843A is an essential tool for high-precision current measurement, including WLTP testing (Worldwide harmonized Light vehicles Test Procedure). With a durable design, precise fluxgate technology, and adaptability to various operating environments, it provides reliable measurement performance across both laboratory and field applications.

The CT6873A is an advanced current sensor that provides high-precision AC/DC current measurements for power analysis applications. Its wide frequency range and excellent phase accuracy make it suitable for complex waveform and harmonic studies. It supports automatic phase shift correction (APSC).Technical Details Current Rating: 200 A AC/DC Frequency Range: DC to 10 MHz Accuracy: ±0.03% rdg, ±0.002% f.s. Maximum Conductor Diameter: 24 mm Operating Temperature: -40°C to 85°C Input Impedance Requirement: 1 MΩ or higher

The CT6875 AC/DC Current Sensor is designed for accurate current measurements across a broad frequency range, from DC to 2 MHz (Model CT6875-01: DC to 1.5 MHz). With a rated current of 500 A, it is ideal for R&D, quality evaluation, manufacturing, and maintenance in industries such as wireless charging systems, inverter motors, PV power conditioners, and EV quick charging facilities. In combination with the Power Analyzer PW8001, the sensor allows for precise high-frequency and low power factor measurements. Technical Details: Rated Current: 500 A Frequency Bandwidth: CT6875: DC to 2 MHzBasic Accuracy: Amplitude: ±0.04 % rdg. ±0.008 % f.s., Phase: ±0.08° Maximum Conductor Diameter: 36 mm Maximum Rated Voltage to Ground: 1000 V CAT III Operating Temperature: -40°C to 85°C Input Impedance Requirement: 1 MΩ or higher Output Terminal: ME15W Cable length: 3m

Banner Specs:AC/DC currents up to 500 AFrequency Bandwidth DC to 500 kHzBasic accuracy: ±0.2% rdg. Operating temperature: -40 °C to 85 °C Output voltage ratio 4 mV/A Applications:WLTP testing (Worldwide harmonized Light vehicles Test Procedure) Evaluation of current consumption of automotive electrical components like air compressors or power steering systems On-site efficiency and current evaluation of inverters and motorsIn detail: The CT6844A AC/DC Current Clamp combines the flexibility of a clamp-style sensor with high-precision measurement, achieving a basic accuracy of ±0.2% rdg. This allows for easy, non-intrusive current measurement without breaking the circuit while maintaining the accuracy needed for precise power analysis in demanding applications. Utilizing advanced fluxgate technology, it ensures outstanding stability and accuracy in both AC and DC current measurements. With a maximum current rating of 500 A and a wide frequency bandwidth from DC to 500 kHz, it enables accurate detection of rapid current fluctuations. This capability makes it suitable for applications with demanding measurement requirements, such as automotive and power electronics industries. The current clamp delivers reliable performance across a wide temperature range of -40 °C to 85 °C, ensuring stability even in demanding environments such as engine compartments and outdoor testing locations. It is well-suited for evaluating the current consumption of automotive electrical components, including air compressors and power steering systems. Additionally, its high-accuracy clamp design allows for efficient on-site assessment of IGBT inverters (Insulated Gate Bipolar Transistors) and motor performance. Technicians can use it to conduct precise efficiency evaluations and current measurements, enabling them to quickly identify anomalies or performance degradation, ultimately supporting effective maintenance and diagnostics. Phase shift correction functions of HIOKI Power Analyzers are supported, including the automatic correction feature of the PW8001 Power Analyzer. By integrating these features, it ensures accurate power analysis in dynamic and high-frequency applications, minimizing measurement errors and enabling higher precision in power evaluation. Direct connection to HIOKI Power Analyzers and Memory Recorders is possible via the ME15W connector, which also supplies power to the CT6844A. Additionally, when combined with a HIOKI sensor unit (CT9555, CT9556, CT9557), it can be used with oscilloscopes and other data acquisition (DAQ) systems, providing a voltage output ratio of 4 mV/A. Furthermore, its robust construction, 20 mm core diameter, and 3-meter cable length allow for flexible installation in various test environments. The CT6844A is an essential tool for high-precision current measurement, including WLTP testing (Worldwide harmonized Light vehicles Test Procedure). With a durable design, precise fluxgate technology, and adaptability to various operating environments, it provides reliable measurement performance across both laboratory and field applications.

Banner Specs AC/DC currents up to 20 A Frequency Bandwidth DC to 2 MHz Basic accuracy: ±0.2% rdg.Operating temperature: -40 °C to 85 °COutput voltage ratio 100 mV/A Applications:Optimization of low-power circuits in EVs to increase driving range Analyzing current consumption of loads like motors, heaters, and LEDs On-site efficiency and current evaluation of inverters and motorsIn detail:The CT6841A AC/DC Current Clamp combines the flexibility of a clamp-style sensor with high-precision measurement, achieving a basic accuracy of ±0.2% rdg. This allows for easy, non-intrusive current measurement without breaking the circuit while maintaining the accuracy needed for precise power analysis in demanding applications. Utilizing advanced fluxgate technology, it ensures outstanding stability and accuracy in both AC and DC current measurements. With a maximum current rating of 20 A and a wide frequency bandwidth from DC to 2 MHz, it enables accurate detection of rapid current fluctuations. This capability makes it suitable for applications with demanding measurement requirements, such as automotive and power electronics industries.The current clamp delivers reliable performance across a wide temperature range of -40 °C to 85 °C, ensuring stability even in demanding environments such as engine compartments and outdoor testing locations. It is well-suited for evaluating the current consumption of automotive electrical components – especially actuating devices such as wiper motors, window motors, and seat heaters, but also electronic loads like LED lights.Additionally, its high-accuracy clamp design allows for efficient on-site assessment of IGBT inverters (Insulated Gate Bipolar Transistors) and motor performance. Technicians can use it to conduct precise efficiency evaluations and current measurements, enabling them to quickly identify anomalies or performance degradation, ultimately supporting effective maintenance and diagnostics.Phase shift correction functions of HIOKI Power Analyzers are supported, including the automatic correction feature of the PW8001 Power Analyzer. By integrating these features, it ensures accurate power analysis in dynamic and high-frequency applications, minimizing measurement errors and enabling higher precision in power evaluation. Direct connection to HIOKI Power Analyzers and Memory Recorders is possible via the ME15W connector, which also supplies power to the CT6841A. Additionally, when combined with a HIOKI sensor unit (CT9555, CT9556, CT9557), it can be used with oscilloscopes and other data acquisition (DAQ) systems, providing a voltage output ratio of 100 mV/A. Furthermore, its robust construction, 20 mm core diameter, and 3-meter cable length allow for flexible installation in various test environments. The CT6841A is an essential tool for high-precision current measurement, including the optimization of low power circuits. With a durable design, precise fluxgate technology, and adaptability to various operating environments, it provides reliable measurement performance across both laboratory and field applications.

Banner Specs: AC/DC currents up to 1000 A Frequency Bandwidth DC to 200 kHz Basic accuracy: ±0.2% rdg. Operating temperature: -40 °C to 85 °C Output voltage ratio 2 mV/A Applications: WLTP testing (Worldwide harmonized Light vehicles Test Procedure) on commercial vehicles Evaluation of current consumption of automotive components like air compressors or power steering systemsOn-site efficiency and current evaluation of inverters and motors In detail:The CT6846A AC/DC Current Clamp combines the flexibility of a clamp-style sensor with high-precision measurement, achieving a basic accuracy of ±0.2% rdg. This allows for easy, non-intrusive current measurement without breaking the circuit while maintaining the accuracy needed for precise power analysis in demanding applications. Utilizing advanced fluxgate technology, it ensures outstanding stability and accuracy in both AC and DC current measurements. With a maximum current rating of 1000 A and a wide frequency bandwidth from DC to 100 kHz, it enables accurate detection of rapid current fluctuations. This capability makes it suitable for applications with demanding measurement requirements, such as automotive and power electronics industries. The current clamp delivers reliable performance across a wide temperature range of -40 °C to 85 °C, ensuring stability even in demanding environments such as engine compartments and outdoor testing locations. It is well-suited for evaluating the current consumption of automotive electrical components, including air compressors and power steering systems. Additionally, its high-accuracy clamp design allows for efficient on-site assessment of IGBT inverters (Insulated Gate Bipolar Transistors) and motor performance. Technicians can use it to conduct precise efficiency evaluations and current measurements, enabling them to quickly identify anomalies or performance degradation, ultimately supporting effective maintenance and diagnostics. Phase shift correction functions of HIOKI Power Analyzers are supported, including the automatic correction feature of the PW8001 Power Analyzer. By integrating these features, it ensures accurate power analysis in dynamic and high-frequency applications, minimizing measurement errors and enabling higher precision in power evaluation. Direct connection to HIOKI Power Analyzers and Memory Recorders is possible via the ME15W connector, which also supplies power to the CT6846A. Additionally, when combined with a HIOKI sensor unit (CT9555, CT9556, CT9557), it can be used with oscilloscopes and other data acquisition (DAQ) systems, providing a voltage output ratio of 2 mV/A. Furthermore, its robust construction, 50 mm core diameter, and 3-meter cable length allow for flexible installation in various test environments. The CT6846A is an essential tool for high-precision current measurement, including WLTP testing (Worldwide harmonized Light vehicles Test Procedure). With a durable design, precise fluxgate technology, and adaptability to various operating environments, it provides reliable measurement performance across both laboratory and field applications.

The CT6872 is a high-precision AC/DC current sensor designed for detailed waveform observation and harmonic analysis. With a frequency range of up to 10 MHz, it is ideal for high-frequency power electronics testing. It supports automatic phase shift correction (APSC). Technical Details: Current Rating: 50 A AC/DC Frequency Range: DC to 10 MHz Accuracy: ±0.03% rdg, ±0.002% f.s. Maximum Conductor Diameter: 24 mm Operating Temperature: -40°C to 85°C • Input Impedance Requirement: 1 MΩ or higher

The CT6862-05 is a pass-through AC/DC current sensor designed for precision power measurement in industrial environments. It features a wide frequency range and low phase shift, making it highly suitable for accurate waveform observation and harmonic analysis. Technical Details: Current Rating: 50 A AC/DC Frequency Range: DC to 1 MHz Accuracy: ±0.05% rdg, ±0.01% f.s. Maximum Conductor Diameter: 24 mm Operating Temperature: -30°C to 85°C Input Impedance Requirement: 1 MΩ or higher

Hioki's pass-through AC/DC current sensors are premium devices for use with power meters, memory HiCorders and high performance oscilloscopes. The CT6877 is a DC to 1 MHz/2000 A sensor that is ideal for evaluating inverter power conversion efficiency in next generation devices. The CT6877 offers a wide frequency band and excellent noise immunity, prerequisites for the proper evaluation of inverter motors used in electric vehicles and hybrid vehicles, a class of devices that continues to move towards ever higher currents and higher frequency circuits.Main features:The combined accuracy with the HIOKI power analysers PW8001, PW6001 and PW3390 is specified. Details on the combined accuracy can be found in the operating instructions.Measures high currents up to 2000 A for EV, HEV and other electric vehiclesImproved noise resistance through stronger shielding enables accurate measurement of the current hidden in the noiseHighly accurate measurement due to flat frequency characteristics and CMRR performanceImproved environmental resistance than ever before enables measurements at -40 to 85 °CSuperior frequency characteristics from DC to 1 MHz (amplitude)Fulfil a wide range of applications from measuring battery charge/discharge to the secondary side of inverters in photovoltaic power generation and the evaluation of fuel cells, etc.Überwachen Sie Wellenformen in Verbindung mit Oszilloskopen oder Memory HiCorders und Sensor Unit

The CT6872 is a high-precision AC/DC current sensor designed for detailed waveform observation and harmonic analysis. With a frequency range of up to 10 MHz, it is ideal for high-frequency power electronics testing. It supports automatic phase shift correction (APSC). Technical Details: Current Rating: 50 A AC/DC Frequency Range: DC to 10 MHz Accuracy: ±0.03% rdg, ±0.002% f.s. Maximum Conductor Diameter: 24 mm Operating Temperature: -40°C to 85°C Input Impedance Requirement: 1 MΩ or higher

Banner Specs:  AC/DC currents up to 500 A Frequency Bandwidth DC to 4 MHz (amplitude), DC to 1 MHz (phase) Basic accuracy 0.027 % 120 dB CMRR at 100 kHz Output voltage ratio 4 mV / A USPs: Supports phase-shift correction when used with HIOKI power analyzers Applications:  Testing and analysis of electric vehicle (EV) inverter motors Measurement of inductor and transformer losses Evaluation of wireless charging systems Power consumption measurements in renewable energy systems In detail:The HIOKI CT6904A AC/DC Current Sensor is engineered for high-precision current measurements, supporting currents up to 500 A with a wide frequency bandwidth from DC to 4 MHz. Employing advanced zero-flux detection with flux gate technology, the sensor achieves exceptional linearity of ±5 ppm and a high common-mode rejection ratio of 120 dB at 100 kHz, ensuring accurate and reliable measurement even in noisy environments. The CT6904A works directly with HIOKI Power Analyzers and Memory Recorders, which supply power to the sensor via the ME15W connector. When combined with a HIOKI sensor unit (CT9555, CT9556, or CT9557), it can also be used with oscilloscopes or other DAQ systems, providing a voltage output ratio of 4 mV/A. Its robust construction, 32 mm (1.26 in) core diameter, 3-meter cable length, and maximum voltage rating of 1000 V CAT III ensure flexible installation and safe high-voltage operation across diverse applications. The CT6904A delivers exceptional measurement accuracy, making it ideal for applications where precision is critical. It achieves a basic accuracy of ±0.025% of reading plus ±0.007% of full scale for DC measurements. For AC measurements, the basic accuracy is ±0.02% of reading plus ±0.007% of full scale. Combined with its wide frequency bandwidth, this performance ensures reliable results across both low- and high-frequency applications. Compared to other current sensors on the market, the CT6904A minimizes the impact of conductor position on measurement values, ensuring highly reproducible results. While the effect of conductor position typically becomes more significant at higher frequencies, the CT6904A effectively reduces this impact, delivering stable and reliable measurements. This high reproducibility is especially valuable when comparing the losses of multiple inductors or transformers, establishing the CT6904A as a top choice for loss measurements in such applications. The CT6904A also supports phase shift correction functions of HIOKI Power Analyzers, including the automatic correction function of the PW8001 Power Analyzer. These features ensure precise power analysis in dynamic, high-frequency applications, making the sensor ideal for evaluating high-frequency inductor and transformer losses, wireless charging systems, and EV inverter motors.