CT6875A - AC/DC Current sensor

€1,698.00*

Content: 1 Each

Prices excl. VAT plus shipping costs

In stock in Germany

Available stock: 1

Product details

Product number: CT6875A

EAN: 4536036013913

Width: 500 mm

Height: 1120 mm

Weight: 1.06 kg

Product information "CT6875A - AC/DC Current sensor"

The CT6875 AC/DC Current Sensor is designed for accurate current measurements across a broad frequency range, from DC to 2 MHz (Model CT6875-01: DC to 1.5 MHz). With a rated current of 500 A, it is ideal for R&D, quality evaluation, manufacturing, and maintenance in industries such as wireless charging systems, inverter motors, PV power conditioners, and EV quick charging facilities. In combination with the Power Analyzer PW8001, the sensor allows for precise high-frequency and low power factor measurements.

Technical Details:

Rated Current: 500 A
Frequency Bandwidth: CT6875: DC to 2 MHz
Basic Accuracy: Amplitude: ±0.04 % rdg. ±0.008 % f.s., Phase: ±0.08°
Maximum Conductor Diameter: 36 mm
Maximum Rated Voltage to Ground: 1000 V CAT III
Operating Temperature: -40°C to 85°C
Input Impedance Requirement: 1 MΩ or higher
Output Terminal: ME15W
Cable length: 3m

More than specs – find more details here:
🔗 Measure Power with Precision – Across All Applications

CT6875
Instruction Manual
6x Mark bands
Operating Precautions

Related products

MR8870-20

MR8870-20 - Portable data recorder

The Hioki MR8870-20 Data Recorder is a versatile, compact oscilloscope-like device designed for high-speed waveform recording and long-term RMS data capture. It features isolated inputs for safe measurement of power lines, and its real-time data-saving functionality ensures continuous monitoring with minimal interruptions.With up to 1 MS/s sampling rate and the ability to record fluctuations in RMS data, the MR8870-20 is ideal for applications such as motor startup analysis, inverter output waveform monitoring, and CB timing measurements. Its portable design makes it easy to use on-site. Technical Details: Channels: 2 analog, 4 logic channels Max Sampling Rate: 1 MS/s (1 µs) Memory Capacity: 12 bits × 2 M-Words/channel Storage: CF card (up to 2 GB, FAT/FAT32) Display: 4.3-inch TFT color LCD Operating Temperature: 0°C to 40°C Power Supply: AC adapter (100–240 V), Battery Pack 9780 Dimensions: 176 mm (W) × 101 mm (H) × 41 mm (D) Weight: 600 g (with battery pack)

€1,248.00*

PW8001

PW8001 - High Precision Power Analyzer

High-precision power analyser for analysing the efficiency of inverters and inverters with basic accuracy of ±0.03%, sampling rate of 15 MHz, 18-bit AD converters, automatic phase shift correction, data update rate of 1 ms.

PW3390

PW3390 - Portable 4-channel Power Analyzer

Portable 4-channel power analyser with ±0.09% basic accuracy, DC–200 kHz measurement range, 16-bit converter, phase shift correction for HIOKI current sensors, 50 ms data update rate, 16-channel waveform/analogue output, motor analysis, WLTP-compliant.

PW3336

PW3336 - AC/DC Power Meter

The PW3336 series measures power across a wide range of electrical equipment, from single-phase devices to industrial three-phase systems using 2 input channels.

€3,858.00*

PW3337

PW3337 - Power meter

The PW3337 Power Meter is a versatile and precise device designed to measure power consumption in three-phase and single-phase systems.

€5,328.00*

CT9902

CT9902 - EXTENSION CABLE

The CT9902 is a 5-meter extension cable designed for use with ME15W-equipped current transformers (CTs), providing additional length for versatile installations. Technical Details: Length: 5 meters Connectors: ME15W(m 12pin) / ME15W(w 12pin) Compatibility: ME15W-equipped CTs

€228.00*

MR8880 - Portable Memory Recorder, 4 Channels

MR8880-20

MR8880 - Portable Memory Recorder, 4 Channels

The MR8880 is a 4 channel portable data acquisition system (DAQ) with a maximum sampling rate of 1Msamples/s on all analog channels simultaneously. It has 4 analog direct input channels for voltages up to 600V and 8 logic channels.Technical Details: Complies CAT III 600V isolation for direct measure of 480V power line 4 complete isolated channels Operating temperature range of -10°C to 50°C Built to withstand mechanical shocks and vibrations PRESET function A memory capacity of 14bit × 1 M words/ch (1 word = 2 bytes)

€3,118.00*

MR8875

MR8875 - Portable memory recorder

The Hioki MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)

€4,758.00*

CT9555

CT9555 - SENSOR UNIT

The CT9555 is a power supply unit designed for single-channel current sensors providing a high-precision waveform output. It is ideal for applications requiring accurate waveform measurement from a single source. Technical Details: Channels: 1 Output: Waveform (BNC terminal) Power consumption: 45 VA max Power supply: AC Adapter Z1008 Input connector type: Hioki ME15W female terminal Output connector type: BNC Dimensions: 33 x 67 x 132 mm Weight: 200 gSupported sensors: 9272-05, CT684x-05, CT684xA, CT686x-05, 9709-05, CT687x, CT687xA, PW9100, CT6904, CT6904A More than specs – find more details here:🔗 Zero-flux Current Clamps: Accuracy without effort from mA to kA

€478.00*

MR8905

MR8905 - Input module for MR8875

The Hioki MR8905 is a 2-channel input module designed for high-precision voltage and RMS measurements. It allows switching between instantaneous values and AC RMS values, making it ideal for applications in power analysis and waveform monitoring. With a high sampling rate and integrated low-pass filter, the module ensures accurate data acquisition. Technical Details: Channels: 2, switchable between instantaneous value and AC RMS valueInput terminals: Banana jacks (CAT II 1000 V AC & DC, CAT III 600 V AC & DC) Measurement range: 500 mV to 50 V/div, 7 ranges Low-pass filter: 5/50/500/5 kHz, OFF Resolution: 1/1250 of the measurement range (16-bit A/D converter) Sampling rate: 500 kS/s (simultaneous for 2 channels) Accuracy: ±0.5% f.s. (with 5 Hz filter ON) RMS accuracy: ±1.5% f.s. (30 Hz to 1 kHz), ±3% f.s. (1 kHz to 10 kHz) Input coupling: DC/AC RMS/GNDMaximum input: 1000 V DC, 700 V AC Dimensions: 119.5 mm × 18.8 mm × 151.5 mm Weight: 185 g

€1,478.00*

CT9556

CT9556 - SENSOR UNIT

The CT9556 is a power supply unit designed for single-channel current sensors. It offers waveform and RMS output for a single channel. It is ideal for applications requiring accurate waveform and RMS measurement from a single source. Technical details Channels: 1 Output: Waveform and RMS (BNC terminal) Power consumption: 45 VA max Power supply: AC Adapter Z1008 Input connector type: Hioki ME15W female terminal Output connector type: BNC Dimensions: 33 x 67 x 132 mm Weight: 200 g Supported sensors: 9272-05, CT684x-05, CT684xA, CT686x-05, 9709-05, CT687x, CT687xA, PW9100, CT6904A More than specs – find more details here:🔗 Zero-flux Current Clamps: Accuracy without effort from mA to kA

€628.00*

CT9557

CT9557 - SENSOR UNIT

The CT9557 is a power supply unit that supports up to four Hioki current sensors. It can aggregate the provided waveforms for total output. It is ideal for large current or multi-cable circuits. Technical detailsChannels: 4 Output: Waveform, total waveform, and total RMS (BNC terminals) Power consumption: 155 VA max Power supply: AC Adapter Z1002 Input connector type: Hioki ME15W female terminal • Output connector type: BNC Dimensions: 116 x 67 x 132 mm Weight: 420 g Supported sensors: 9272-05, CT684x-05, CT684xA, CT686x-05, 9709-05, CT687x, CT687xA, PW9100, CT6904AMore than specs – find more details here:🔗 Zero-flux Current Clamps: Accuracy without effort from mA to kA

€1,538.00*

Details

L9217

L9217 - BNC Cable

The L9217 is a connection cord with insulated BNC connectors at both ends. Technical Details: Length: 1.6 m Maximum Rated Voltage to Earth: CAT III 300V, CAT II 600VMaximum Rated Line Voltage: 300V Maximum Rated Current: 0.2A Compatible Hioki Products: VT1005 Voltage Divider, Memory Recorders and similar products.

€68.00*

9165

9165 - BNC Cable

The 9165 is a 1550 mm long BNC to BNC coaxial cable for reliable signal transmission in test and measurement applications. It features an RG-58A/U coaxial cable with 50 Ohm BNC connectors (BNCP-58A) at both ends and offers high signal integrity. Precision manufacturing makes it ideal for laboratory applications.Technical details: Cable type: RG-58A/U coaxialConnector type: BNC (BNCP-58A), 50 OhmLength: 1550 mm (+20 mm tolerance)Applications: Reliable signal transmission for testing and measurement

€38.00*

LR8101

LR8101 - Modular multi-channel Data Logger for system integration

Main unit for system integration applications, modular system, max. 300 voltage/temperature or 12 power channels, for high voltage/high current applications, max. update interval 5 ms, for 19” rack systems

€2,058.00*

LR8102

LR8102 - Modular multi-channel Data Logger for system integration, optical sync, UDP, CAN

The versatile, modular data logger LR8102 can be used in combination with a variety of modules. It is therefore the perfect solution for integration in applications requiring multiple channels and recording intervals as short as 5 ms.