HIOKI CT6862-05 - AC/DC Current Sensor, Fluxgate, 50 A / 1 MHz
Description
Product information HIOKI CT6862-05 - AC/DC Current Sensor, Fluxgate, 50 A / 1 MHz
The CT6862-05 is a pass-through AC/DC current sensor designed for precision power measurement in industrial environments. It features a wide frequency range and low phase shift, making it highly suitable for accurate waveform observation and harmonic analysis.
More than specs – find more details here:
Find out more about precise power measurement
Technical Details:
- Current Rating: 50 A AC/DC
- Frequency Range: DC to 1 MHz
- Accuracy: ±0.05% rdg, ±0.01% f.s.
- Maximum Conductor Diameter: 24 mm
- Operating Temperature: -30°C to 85°C
- Input Impedance Requirement: 1 MΩ or higher
Find out more about precise power measurement
-
Product catalog with data sheet, current sensors & current probes series (English)16,413 KB pdf
-
Product brochure with data sheet, Sensor Unit CT9555, CT9556, CT9557 (English)1,693 KB pdf
-
Product catalog, POWER ANALYZER Series (English)2,717 KB pdf
-
Product Catalog, Power Meter Series PW3335, PW3336, PW3337, 3333, 3334 (English)9,158 KB pdf
-
Instruction Manual, AC/DC CURRENT SENSOR CT6862, CT6863 (English)299 KB pdf
Skip product gallery
Regular price:
€168.00
Regular price:
€118.00
Regular price:
€668.00
Regular price:
€48.00
Regular price:
€4,058.00
Regular price:
€718.00
Regular price:
€1,738.00
Regular price:
€308.00
Regular price:
€5,598.00
Regular price:
€1,558.00
Regular price:
€248.00
Regular price:
€668.00
Regular price:
€4,998.00
Regular price:
€2,388.00
Regular price:
€1,558.00
Regular price:
€3,568.00
Regular price:
€508.00
Regular price:
€2,168.00
Related products
Z1002
Z1002 - Power supply unit for MR8880, MR8875, PQ3198
The Z1002 is a universal power supply unit for mains voltages from 100 V to 240 V AC, 50/60 Hz, which provides 12 V DC, 5.25 A max (63 W). It is suitable for the Hioki products CT9557, MR8875, MR8880, PW3198, PQ3100 and PQ3198.Technical details: Input range: 100 V AC to 240 V AC Output: 12VDC, 5.25A, Pmax 63W Residual ripple & noise: 100mVpp DC connector: angled 5.5mm barrel plug (inner diameter 2.5mm)
9234
9234 - Printer paper for MR8880-20, 8807/08, 8420 series
The 9234 is a printerpaper for MR8880 (PRINTER UNIT MR9000 required) and 8860, 8861, 8420, 8421, 8422, 8807, 8808, 8714, 8715 memory recorders. Technical Details:Roll type A6 width 112 mm × 18 m 10 rolls/set
MR9000
MR9000 - Printer module for MR8880
The MR9000 Printer Unit is designed for use with the Hioki MR8880 Memory recorder, enabling easy printouts of measurement results. This compact and efficient printer offers precise waveform documentation directly from the connected Memory HiCorder, making it ideal for fieldwork and quick data review. The MR9000 ensures seamless integration with your HiCorder, delivering accurate and reliable outputs for all your measurement needs. Technical Information: Compatible devices: Hioki MR8880 Memory HiCorder Usable recording paper: 9234 Recording Paper Recording width: 104 mm (832-dot resolution), waveform section width 100 mmRecording speed: Max 1 cm/s Paper feed accuracy: ±3% (at 25°C, 60% RH)
L1012
HIOKI L1012 - DC Power cable for LR8450, LR810x, MR8875 and MR8880
DC Power cable, 2 m, unprocessed ends, for LR8450, LR8450-01, LR8101, LR8102, MR8875 and MR8880
PW3390
HIOKI PW3390 - Portable 4-channel Power Analyzer
Portable 4-channel Power Analyzer, ±0.09% basic accuracy, DC to 200 kHz measurement band for power, 16-bit conversion, phase shift correction for HIOKI current sensors, 50 ms data update rate, 16-ch waveform/analog output, motor analysis function, WLTP compliant
MR6000
HIOKI MR6000 - Modular 32-channel memory recorder, 200 MS/s, 1000 V direct input, touchscreen
Modular memory recorder, up to 32 channels, max. sampling rate 200 MS/s, max 1000 VDC isolated direct voltage input, up to 1 TB storage with SSD option, intuitive user interface, touchscreen, real-time waveform calculation and real-time saving
PW3336
PW3336 - AC/DC Power Meter
The PW3336 series measures power across a wide range of electrical equipment, from single-phase devices to industrial three-phase systems using 2 input channels.
C1004
C1004 - Carrying Case for MR8875
Durable hard-shell case with wheels and telescoping handle, precisely fitted for MR8875 and accessories.
MR8902
HIOKI MR8902 - 15-channel voltage/temp. module for MR8875, 10 ms
The MR8902 Voltage/Temp Unit is a 15-channel voltage and thermocouple input module for the MR8875 memory recorder, designed for stable multi-point DC voltage and temperature acquisition in demanding industrial environments.Each of the 15 channels can be individually configured for voltage or thermocouple measurement. With 16-bit A/D conversion and ranges from 500 µV/div up to 5 V/div, the module enables precise low-level signal acquisition across a wide measurement span. Simultaneous channel scanning supports synchronized multi-point monitoring at update rates down to 10 ms. The unit supports thermocouple types K, J, E, T, N, R, S, B and W, with selectable internal or external reference junction compensation. Internal compensation accuracy is ±0.5°C (added to measurement accuracy). Thermocouple broken-wire detection is integrated and switchable. High noise immunity supports reliable operation in electrically demanding environments, with a normal mode rejection ratio of ≥50 dB and a common mode rejection ratio up to 140 dB (with digital filter). Selectable 50 Hz or 60 Hz digital filtering enhances measurement stability under industrial mains conditions. Typical applications include multi-channel temperature profiling, environmental and thermal validation testing, industrial DC signal monitoring, and long-term trend recording in laboratory and field environments. Technical specificationsChannels: 15 (voltage / thermocouple) Measurement: Voltage, temperature (thermocouple); types K, J, E, T, N, R, S, B, WRe5-26Range / resolution: 500 µV to 5 V/div, 16-bit A/DInput: Push terminal, 1 MΩUpdate rate: 10 ms, 20 ms, 500 ms, 2 s Filter: Digital filter 50 Hz, 60 Hz, OFF Accuracy: ±0.1 % f.s. Voltage limits: 100 V DC input, 100 V AC/DC to earth
Z5021
HIOKI Z5021 - Power supply unit for current or differential probes, factory option for MR6000
Power supply unit for up to 8 current clamps of the HIOKI CT670x/327x Series, up to 4 current clamps of the HIOKI CT671x Series, up to eight HIOKI 9322 or up to three P9000 differential probes, factory option for MR6000, 12 VDC and 0.6 A per terminal
Z1000
Z1000 - Battery pack for MR8880 and LR8400 series
The Z1000 Battery pack is a NiMH type recharchable battery for the MR8880, LR8400 series products. It charges when installed in the main unit. Product details: Rating: 7.2V, 4500mAh Weight: 0.37 kg
PW3337
HIOKI PW3337 - 3-channel AC/DC power meter up to 65 A and 1000 V
3-channel AC/DC Power Meter, voltage up to 1000 V, direct current input up to 65 A without
internal shunts, 5000 A via external sensors, frequency bandwidth DC to 100 kHz, IEC
61000-4-7 harmonic analysis, LAN and RS-232C interface
MR8901
HIOKI MR8901 - 4-channel voltage module for MR8875, 500 kS/s,150 VDC
The MR8901 Analog Unit is a 4-channel voltage input module for the memory recorder MR8875. It enables voltage measurement with simultaneous sampling across all channels. The module provides four isolated BNC input connectors with an input resistance of 1 MΩ and an input capacitance of 10 pF. It supports measurement ranges from 5 mV to 10 V/div with 11 selectable ranges. Simultaneous sampling at up to 500 kS/s across all channels allows acquisition of transient and dynamic signals. The frequency characteristics extend from DC to 100 kHz (–3 dB). The maximum allowable input voltage is 150 V DC, and the maximum rated voltage to earth is 100 V AC/DC.Typical applications include transient analysis, switching waveform recording, dynamic signal measurement, and multi-channel signal acquisition in laboratory and industrial environments. Technical specificationsNumber of channels: 4 (voltage measurement) Input connectors: Isolated BNC, 1 MΩ, 10 pFMeasurement range: 5 mV to 10 V/div (11 ranges) Sampling rate: 500 kS/s (simultaneous across all channels) Frequency characteristics: DC to 100 kHz (–3 dB)Maximum input voltage: 150 V DCMaximum rated voltage to earth: 100 V AC/DCLow-pass filter: 5 / 50 / 500 Hz, 5 kHz, OFF Input coupling: DC, GND Accuracy: ±0.5 % of full scale
CT9902
HIOKI CT9902 - EXTENSION CABLE
The HIOKI CT9902 is a 5-meter extension cable designed for use with ME15W-equipped current transformers (CTs), providing additional length for versatile installations.
CT9556
HIOKI CT9556 - Current Sensor Interface, 1-Channel, with RMS Output
1 channel current sensor interface for current sensors, clamps and probes with ME15W
connectors, sensor power supply, BNC waveform output, BNC RMS output
MR8875
MR8875 - Portable, modular memory recorder, 500 kS/s, 16 isolated ch., 1000 V direct input, touchscreen
The Hioki MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)
MR8904
HIOKI MR8904 - 2-port CAN module for MR8875
The MR8904 CAN Unit is a 2-port CAN interface module for the memory recorder MR8875. It enables acquisition and output of CAN communication signals. The module supports CAN communication according to ISO 11898 and SAE J2411 standards. Each port can be configured for high-speed CAN, low-speed CAN, or single-wire CAN. CAN messages can be received and transmitted, and acknowledgment settings can be configured. Received CAN signals can be converted into analog or logic channels for recording. Up to 15 analog channels (16-bit equivalent) and 16 logic channels can be output. Signal mapping depends on bit length.The module provides ID-trigger functionality and outputs a pulse signal when a specified CAN ID is received. Response time is within 200 μs after message reception.Typical applications include CAN bus monitoring, signal analysis, and synchronized recording of communication data in laboratory and industrial environments. Technical specifications CAN ports: 2 (D-sub, 9-pin)Standards: ISO 11898 (CAN 2.0b), ISO 11898-1/-2/-3, SAE J2411 Interface: High-speed CAN, low-speed CAN, single-wire CAN (per port selectable)Baud rate: 50 kbps to 1 Mbps (high-speed), 10 kbps to 125 kbps (low-speed), 10 kbps to 83.3 kbps (single-wire) Signal output: up to 15 analog channels (16-bit equivalent), 16 logic channels Signal mapping: 1 to 32-bit signals (channel allocation depending on bit width)ID trigger: pulse output on logic channelResponse time: ≤200 μsTerminator: 120 Ω ±10 %, switchableACK control: ON/OFF
U8332
HIOKI U8332 - SSD Unit for MR6000, 256 GB, factory option
SSD Unit for MR6000, 256 GB, factory option, allows real-time recording at maximum 20 MS/s
MR8905
HIOKI MR8905 - 2-channel voltage module for MR8875, 500 kS/s, 1000 VDC
The MR8905 Analog Unit is a 2-channel voltage input module for the memory recorder MR8875. It enables voltage measurement of instantaneous values and AC RMS values. Each channel supports measurement ranges from 500 mV to 50 V/div. The module uses 16-bit A/D conversion and supports simultaneous sampling across both channels at up to 500 kS/s. The frequency characteristics extend from DC to 100 kHz (–3 dB).The module supports RMS measurement with defined accuracy and response time. Input coupling modes DC, AC-RMS, and GND are selectable. The maximum allowable input voltage is 1000 V DC or 700 V AC. The maximum rated voltage to earth is CAT II 1000 V AC/DC and CAT III 600 V AC/DC. Typical applications include voltage measurement, RMS evaluation, and waveform analysis in laboratory and industrial environments. Technical specifications Channels: 2 (voltage, instantaneous / AC RMS selectable) Input: banana connector, 4 MΩ, <1 pFMeasurement range: 500 mV to 50 V/divAccuracy: ±0.5 % f.s. (instantaneous), ±1.5 % / ±3 % f.s. (RMS, frequency-dependent) Sampling / resolution: 500 kS/s simultaneous, 16-bit (1/1250) Frequency characteristics: DC to 100 kHz (–3 dB) Low-pass filter: 5, 50, 500 Hz, 5 kHz, OFF Input coupling: DC, AC-RMS, GNDMaximum input: 1000 V DC, 700 V AC Maximum rated voltage to earth: CAT II 1000 V AC/DC, CAT III 600 V AC/DC
MR8903
HIOKI MR8903 - 4-channel strain module for MR8875, 200 kS/s
The MR8903 Strain Unit is a 4-channel strain and low-voltage input module for the memory recorder MR8875. It enables strain and voltage measurement with configurable inputs for each channel.Each channel can be configured for strain gauge or low-level voltage measurement. The module uses 16-bit A/D conversion and supports simultaneous sampling across all channels at up to 200 kS/s. The frequency characteristics extend from DC to 20 kHz. The strain measurement function supports bridge sensors from 120 Ω to 1 kΩ with a bridge excitation voltage of 2 V. Measurement ranges span from 20 µε/div to 1000 µε/div. Selectable low-pass filters (5 Hz, 10 Hz, 100 Hz, 1 kHz, OFF) are available. The maximum allowable voltage between input terminals and earth is 30 V AC rms or 60 V DC. The maximum bridge input voltage is 10 V DC. Typical applications include strain measurement, vibration analysis, and multi-channel data acquisition in laboratory and industrial environments. Technical specificationsChannels: 4 (strain/voltage selectable per channel, auto-balance ±10000 με) Input: ≥1 MΩ, bridge 120 Ω to 1 kΩ, excitation 2 V ±0.05 VMeasurement ranges: 20–1000 με/div (strain), 50–1000 μV/div (voltage) Accuracy: ±0.5 % f.s. (range-dependent, incl. offset) Sampling / resolution: 200 kS/s simultaneous, 16-bit (1/1250)Frequency characteristics: DC to 20 kHz (+1/−3 dB)Low-pass filter: 5, 10, 100 Hz, 1 kHz, OFF Maximum voltage: 10 V DC input, 30 V AC rms / 60 V DC to earth
CT9555
HIOKI CT9555 - Current Sensor Interface, 1-Channel
1 channel current sensor interface for current sensors, clamps and probes with ME15W
connectors, sensor power supply, BNC waveform output
PW8001
HIOKI PW8001 - Modular 8-channel High Precision Power Analyzer
Modular high precision power analyzer, up to 8 channels, ±0.03% basic accuracy, 15 MHz
sampling rate, 18-bit A/D conversion, automatic phase shift correction for Hioki current
sensors, 1 ms data update rate, CMRR 110 dB @ 100 kHz
LR8101
HIOKI LR8101 - Modular multi-channel Data Logger for system integration
Main unit for system integration applications, modular system, max. 300 voltage/temperature or 12 power channels, for high voltage/high current applications, max. update interval 5 ms, for 19” rack systems
LR8102
HIOKI LR8102 - Modular multi-channel Data Logger for system integration, optical sync, UDP, CAN
Main unit for system integration applications, modular system, max. 3000 voltage/temperature channels or 120 power channels, for high voltage/high current applications, real-time data transfer via UDP, max. update interval 5 ms, for 19” rack systems
Local HIOKI support
Need more information before you decide? Our authorized distribution partners can support you locally, answer your questions in your language, and help you find the right HIOKI solution.