CM3286-50 - AC power clamp

€638.00*

Content: 1 Each

Prices excl. VAT plus shipping costs

In stock, delivery time: Ready for dispatch

Available stock: 1

Product details

Product number: CM3286-50

EAN: 4536036013579

Width: 350 mm

Height: 2410 mm

Weight: 0.91 kg

Product information "CM3286-50 - AC power clamp"

The CM3286-50 AC Clamp Power Meter is designed to measure AC current, voltage, and power with a broad range, from 5 W to 360 kW, and currents from 60 mA to 600 A. It offers quick and accurate readings with true RMS measurement and can measure simple integral power consumption and phase sequence. The device features a large jaw diameter of 46 mm, allowing it to measure large-diameter cables, and its backlit display ensures easy reading even in dimly lit environments.

With Bluetooth® communication (available via the optional Z3210 wireless adapter), data can be easily transferred for analysis. This versatile tool is ideal for applications ranging from manufacturing plants to household measurements.

Technical Details:

Model: CM3286-50
Current Measurement Range: 60 mA to 600 A AC
Voltage Measurement Range: 80 V to 600 V AC
Power Measurement Range: o Single-phase: 5 W to 360 kW o Balanced three-phase 3-wire: 20 W to 623.5 kW o Balanced three-phase 4-wire: 40 W to 1080 kW
Frequency Range: 45 Hz to 999.9 Hz
Maximum Rated Voltage to Ground: 600 V CAT IV, 1000 V CAT III
Operating Temperature: -25°C to 65°C
Jaw Diameter: 46 mm
Dimensions: 65 mm (W) × 241 mm (H) × 35 mm (D)
Weight: 450 g
Power Supply: 2 × LR03 Alkaline batteries (25 hours continuous use)
Optional Wireless Adapter: Z3210 for Bluetooth® connectivity

CM3286-50
Connection Cord L9257
2x AAA-size alkaline battery (LR03)
Carrying Case C0203
Instruction Manual
Operating Precautions

Related products

Z3210

Z3210 - Bluetooth Adapter

The Z3210 Bluetooth Adapter allows wireless communication between compatible HIOKI products, enabling easy data transfer and remote operation. List of compatible Hioki products: Battery Tester BT3554-50 AC Clamp Power Meter CM3286-50 AC Leakage Clamp Meter CM4001, CM4002, CM4003 AC Clamp Meter CM4141-50 AC/DC Clamp Meters CM4371-50, CM4373-50, CM4375-50 Digital Multimeter DT4261 Clamp On Earth Tester FT6380-50 Earth Tester FT6031-50 Insulation Tester IR4057-50

€108.00*

L9257

L9257 - Connection Cable

L9257 is a connection cable set that contains two test leads and two detachable large crocodile clips. The leads are each equipped with a straight and an angled banana plug. The plugs are provided with contact protection. Technical details: Length: 1.2 m Colours (cable and clips): red, black Compatible Hioki products: CM3286, ST5520, 3154, 8205-10, 8206-10, power analysers

€38.00*

C0203

C0203 - CARRYING CASE

The C0203 carrying case is suitable for the HIOKI 9322 Differential Probe, HIOKI CM4370 Clamp Meter Series, and similar products. It offers durable and secure storage, making it ideal for field work and transport. Technical Details: C0203 Carrying Case: Suitable for HIOKI 9322 Differential Probe, CM4370 Clamp Meter Series, and similar products

€38.00*

L9207-10

L9207-10 - Measuring lead set red/black

The L9207-10 is a universal test lead for many Hioki Digital Multimeters and Clamp Meters 4mm banana type terminals. Technical information: Cable length: 900 mm Connector type: angeled banana plug 4mm Handle length: 137 mm (incl. tip length) Tip length (cover removed): 17.5 mm Tip Diameter: 2 mm Voltage safety category: CAT IV 600V, CAT III 1000V (with tip cover), CAt II 1000V (tip cover removed)Max. Current: 10 A Others: Tip cover gilded Compatible Products: DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM3286, CM4141, CM4371, CM4373, CM4375

€38.00*

9290-10

9290-10 - CLAMP ON ADAPTER

The 9290-10 is a clamp-on adapter rated for 1000A AC (1500A AC for 5 minutes) and features a 10:1 CT ratio to expand the measurement range of normal clamp ammeters. In addition to the large clamp diameter, good frequency bandwidth and accurate phase response, the CT reliably provides Hioki clamp on power meters with expanded range and large current measurements. Key Features:Rated primary current: 1,000 A AC continuously (1,500 A for 5 minutes) CT ratio: 10:1 Phase accuracy: ±1.0° or less Basic accuracy: 1.5% Frequency characteristic: 20 Hz to 5 kHz Possible core diameters: 55-80 mm x 20 mm

€298.00*

L9300

L9300 - TEST LEAD

The L9300 measuring lead set is an optional accessory for Hioki DMMs and is suitable for current measurements up to 10A. The Test Lead L9300 incorporates integrated caps for greater convenience and safety. The design lets you change the measurement category simply by sliding the test lead’s protective finger guard, eliminating the need to worry about losing caps. Technical Details: Test Lead Ratings: o CAT IV: 600V o CAT III: 1000V o CAT II: 1000V Maximum Current: 10A Length of lead (total): 955 mm ± 20

€38.00*

L4930

L4930 - CONNECTION CABLE SET

The cable set contains two cables (red and black) usable for the DT4280/DT4250 multimeter series to connect with L493x series test pins and clips. Technical Details: 1.2 m length CATIV 600V, CATIII 1000V Contact protection Contact diameter 4 mm (Banana plug) Protective caps

€18.00*

9804

9804 - MAGNETIC ADAPTER

The magnetic adapter 9804 is an optional accessory for all kind of FMI and PMI products that uses 4mm banana plug voltage cords. The adaptor is compatible to M6 pan screws. Technical details: Set of 9804-01 and 9804-02 (red/black) Compatible to 4mm banana plugs

€78.00*

L4938

L4938 - TEST PIN SET

The L4938 isna Test pin set for banana plug equipped test cords like the Hioki L4930 and accesory test leads of the Hioki Digital Multi Meters and Clamp Meters. Safety laboratory test leads with 4 mm banana plugs and sliding sleeves can also be used.Technical Details: Imax = 10A Category: CAT II (Tip cover removed), CAT III 600V (Tip cover attached) Tip diameter: 1.8 mm Connector: 4 mm banana jack Digital Multi Meters and Clamp Meters: DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM3286, CM4141, CM4371, CM4373, CM4375

€18.00*

20 %

L4939

L4939 - BREAKER PIN SET

L4939 is a Test Tip set for measurement at interrupter/breaker - units. It is attachable to the Hioki L4930 measurement leads and similar products equipped with 4 mm banana plugs. It is an optional accessory for Hioki Digital Multimeters and Clamp Meters with 4mm banana type terminals. Technical Details: Cattegory: CAT IV 1000 V Imax = 10A Length: 128 mm Tip Diameter: 2.6 mm Compatible Multimeters and Clamp Meters: DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM3286, CM4141, CM4371, CM4373, CM4375

€30.40* €38.00*

L4934

L4934 - SMALL ALLIGATOR CLIP SET

The L4934 set of small alligator clips is designed to attach to Hioki test probes and test leads with 2 mm tip diameter of the test probes and an optional accessory for many Hioki Multimeters and Clamp Meters. Technical Details: Imax = 3A Max. conductor diameter = 4mm Required Tip diameter: 2mm Attachable to: Test leads L9207, L9208, L9170-10, DT4911, test leads of DT4253, DT4255, DT4256, DT4261, DT4281, DT4282- multimeters. Compatible Multimeters: 3030-10, DM7275, DM7276, DT4223, DT4224, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282 Compatible Clamp Meters: 3280-10F, 3280-70F, CM3281, CM3286, CM3289, CM3291, CM4141, CM4371, CM4373, CM4375

€18.00*

20 %

L4932

L4932 - TEST PIN SET

The L4932 Test pin set is an optional accessory for many Hioki Multimeters and Clamp Meters. It is attachable to the Hioki measurement lead L4930 and similar. A special feature is the posibility to attach the small alligator clip L4934 to the tip of the L4932. Technical details: Cattegory: CAT III 1000V Imax: 10A Feature: L4934 attachable Compatible Multimeters: DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282 Compatible Clamp Meters: CM3286, CM4141, CM4371, CM4373, CM4375

€14.40* €18.00*

L4935

L4935 - ALLIGATOR CLIP SET

The Hioki L4935 Alligator Clip Set is arranged for use with Hioki L4930 or L4940 test leads and it is an optional accessory for many Hioki Multimeters and Clamp Meters. With a 4 mm banana plug connection, these clips provide a secure and reliable attachment for general measurement tasks. Their robust construction ensures accurate measurements even in demanding environments, while the universal design allows for compatibility with various banana plug based test leads. Technical Information: Category: CAT IV 600 V, CAT III 1000 V Conductor Diameter: Max. 25 mmMax Current: 10 A Connector Type: 4 mm Banana Plug Compatible Multimeters: DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282 Compatible Clamp Meters: CM3286, CM4141, CM4371, CM4373, CM4375

€18.00*

L4937

L4937 - Magnetic Adapter Set

The L4937 Magnetic Adapter Set is designed for use with L4930 and L4940 test leads as well as the DT4280/DT4250 multimeters. It accommodates 4mm banana plugs and is compatible with M6 pan screws. This adapter set ensures secure and reliable connections in measurement setups. It is rated for CAT III 1000V, making it suitable for a wide range of electrical testing environments. Technical Details: Compatibility: L4930 and L4940 test leads, DT4280/DT4250 multimeters Fits: 4mm banana plugs Screw compatibility: M6 pan screws Measurement category: CAT III 1000V

€98.00*

L4936

L4936 - Terminals for busbars

The L4936 set is a versatile accessory for all Hioki products that are suitable for measurements on busbars and where the available large crocodile clips are not able to make safe contact with the current-carrying cable or busbar, or where there is a risk of touching current conductors that carry a high voltage. Technical data: Length: 153 mm Maximum cable size: 30 mm Voltage safety category: CAT III 600V Imax: 5 A Compatible cables: L4930, L4940, banana cables corresponding to the CAT level and Imax level of L4936 Compatible products: P9000, DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM3286, CM4141, CM4371, CM4373, CM4375

€88.00*

20 %

L4931

L4931 - EXTENSION CABLE SET

L4931 is a set of cables for extending Hioki test or voltage leads with banana plugs, including touch-proof variants. Technical Specifications:Length: 1.5 m (4.92 ft) Compatible with Hioki products: L1000, L4930, L4940, L9438, P9000, DM7275, DM7276, DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282, CM4141, CM4371, CM4373, CM4375

€14.40* €18.00*