HIOKI CM4003 - AC Leakage Clamp Meter

The 9704 is a versatile banana to BNC conversion adapter accessory wherever this is required. It is suitable for example for Hioki digital multimeters where current probes can be connected, or where a banana to BNC test lead conversion is required for measurement applications.Dimensions: 63W×33H×13D mmConnector configuration: 2x Banana male, 1x BNC female Distance between banana plugs: 19 mmVoltage protection category: CAT III 600VCompatible AC clamp and flexible probes: 9010-50, 9018-50, 9132-50, CT9667-01, CT9667-02, CT9667-03 Compatible Digital Multimeters: DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282 Others: Connection Cable L9097

Das HIOKI Z1013 ist ein Zubehörnetzteil für HIOKI CM4003, SP3000, SP7001-95, SP7150.

HIOKI C0203 carrying case for clamp multimeters and similar devices – durable protection and easy transport for field and service use. Order now.

The Hioki MR8903 is a 4-channel input module designed for voltage and strain measurements, ideal for precision data acquisition in industrial and research environments. It supports a wide range of strain gauges and offers electronic auto-balancing, ensuring high accuracy in both dynamic and static measurements. The module features customizable low-pass filters and provides high-resolution data capture with a 16-bit A/D converter. Technical Details: Channels: 4, selectable for voltage/strain measurement Voltage Measurement Range: 50 µV to 1000 µV/div Strain Measurement Range: 20 µε to 1000 µε/div Input Connectors: Strain gauge converter, Bridge resistance: 120 Ω to 1 kΩ Max Sampling Rate: 200 kS/s Low-pass Filter: 5/10/100 Hz, 1 kHz, OFFResolution: 1/1250 of measurement range (16-bit A/D converter) Max Allowable Input: 5 V DC Dimensions: 119.5 mm (W) × 18.8 mm (H) × 151.5 mm (D)Weight: 173 g

The Hioki MR8905 is a 2-channel input module designed for high-precision voltage and RMS measurements. It allows switching between instantaneous values and AC RMS values, making it ideal for applications in power analysis and waveform monitoring. With a high sampling rate and integrated low-pass filter, the module ensures accurate data acquisition. Technical Details: Channels: 2, switchable between instantaneous value and AC RMS valueInput terminals: Banana jacks (CAT II 1000 V AC & DC, CAT III 600 V AC & DC) Measurement range: 500 mV to 50 V/div, 7 ranges Low-pass filter: 5/50/500/5 kHz, OFF Resolution: 1/1250 of the measurement range (16-bit A/D converter) Sampling rate: 500 kS/s (simultaneous for 2 channels) Accuracy: ±0.5% f.s. (with 5 Hz filter ON) RMS accuracy: ±1.5% f.s. (30 Hz to 1 kHz), ±3% f.s. (1 kHz to 10 kHz) Input coupling: DC/AC RMS/GNDMaximum input: 1000 V DC, 700 V AC Dimensions: 119.5 mm × 18.8 mm × 151.5 mm Weight: 185 g

256 GB SSD unit factory-installed option for MR6000 memory recorder enabling extended high-speed waveform storage. HIOKI U8332 available from HIOKI Europe.

The Hioki MR8902 is a 15-channel analog input module that supports both voltage and temperature measurements. It's designed for use with Memory recorder, offering flexibility for mixed-signal data capture across different types of sensors. With high-resolution measurements and customizable filtering, it’s ideal for applications requiring precise, multi-channel monitoring. This module offers robust performance for both voltage and temperature measurements in demanding applications.Technical Details: Channels: 15, for voltage/temperature measurementInput Connectors: Push button terminal (voltage/thermocouple) Voltage Measurement Ranges: 500 µV to 5 V/div (9 ranges) Temperature Measurement: Thermocouple types K, J, E, T, N, R, S, B, WRe5-26 Resolution: 1/1000 of measurement range (16-bit A/D converter) Digital Filter: 50 Hz, 60 Hz, or OFF Data Refresh Rate: 10 ms to 2 s (depending on filter settings) Max Allowable Input: 100 V DC Dimensions: 119.5 mm (W) × 18.8 mm (H) × 184.8 mm (D) Weight: 190 g

Der HIOKI Z1000-Akkupack ist ein wiederaufladbarer NiMH-Akku für die Produkte der HIOKI Serien MR8880 und LR8400. Er wird aufgeladen, wenn er in der Haupteinheit installiert ist.

The Hioki MR8901 is a 4-channel analog input module designed for use with Hioki Memory Recorders. It allows precise voltage measurement across a wide range of frequencies, making it ideal for capturing fast transients and DC signals. With a maximum sampling rate of 500 kS/s and an integrated 16-bit A/D converter, it ensures high-resolution data acquisition.Technical Details:Channels: 4, voltage measurement Input Connectors: Isolated BNC (input resistance 1 MΩ, input capacitance 10 pF) Sampling Rate: 500 kS/s Measurement Range: 5 mV to 10 V/divLow-pass Filter: 5/50/500 Hz, 5 kHz Resolution: 1/1250 of measurement range (16-bit A/D converter) Accuracy: ±0.5% of full scaleFrequency Characteristics: DC to 100 kHz (-3 dB) Input Coupling: DC/GND Max Allowable Input: 150 V DC Dimensions: 119.5 mm (W) × 18.8 mm (H) × 151.5 mm (D)Weight: 180 g (6.3 oz)

The MR8880 is a 4 channel portable data acquisition system (DAQ) with a maximum sampling rate of 1Msamples/s on all analog channels simultaneously. It has 4 analog direct input channels for voltages up to 600V and 8 logic channels.Technical Details: Complies CAT III 600V isolation for direct measure of 480V power line 4 complete isolated channels Operating temperature range of -10°C to 50°C Built to withstand mechanical shocks and vibrations PRESET function A memory capacity of 14bit × 1 M words/ch (1 word = 2 bytes)

The Hioki MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)

The Hioki MR8904 is a dual-port CAN (Controller Area Network) input module designed to interface with Memory recorder. It supports high-speed, low-speed, and single-wire CAN configurations, making it versatile for automotive and industrial applications. This module enables the analysis of up to 15 analog and 16 logic channels from CAN signals, providing precise data extraction and logging with fast response times. Technical Details:Input CAN Port: 2 ports, D-sub 9-pin male connectors Standards: ISO 11898 CAN 2.0b, ISO 11898-1, -2, -3, SAE J2411Interface: High-speed, low-speed, or single-wire CAN (selectable per port) Transmit ACK: ON/OFF for CAN signal acknowledgment Terminator: ON/OFF, 120 Ω built-in resistance Baud Rate: 50 kbps to 1 Mbps (high-speed), 10 kbps to 125 kbps (low-speed), 10 kbps to 83.3 kbps (single-wire) Analyzed Output Channels: Up to 15 analog and 16 logic channelsSignal Form: 1-bit to 32-bit signals (analog and logic) Response Time: Within 200 µs of receiving CAN message Dimensions: 119.5 mm (W) × 18.8 mm (H) × 151.5 mm (D)Weight: 185 g

Key Specifications2 isolated analog channels with BNC inputs 1 MS/s sampling rate, 12 bit resolution, DC to 50 kHz bandwidth RMS data logging with up to 1000 values per second Voltage measurement: 100 mV to 500 V, 12 ranges2 MWords internal memory per channel, removable memory card storage Typical ApplicationsCapture voltage drops, spikes, and transient power issuesDetect short voltage or current deviations over long periods using RMS logging Record inrush currents and motor control timing Diagnose PLC, relay, and control signal behavior Detailed Product OverviewThe MR8870 Memory Recorder is a compact, handheld data acquisition system designed for technicians and engineers who require high-speed, isolated waveform capture in the field. When configured as an RMS Recorder, the MR8870 calculates up to 1000 RMS values per second, allowing short voltage or current deviations to be detected even during extended monitoring. Equipped with two isolated analog channels with BNC inputs and four logic channels, the MR8870 enables simultaneous measurement of analog waveforms and digital signals. Each analog input supports direct voltage measurement up to 400 VDC and is isolated from earth up to 300 VAC/DC in CAT II environments.Waveform recording and RMS loggingThe MR8870 records waveforms with a maximum sampling rate of 1 MS/s, 12-bit vertical resolution and a bandwidth of DC to 50 kHz. Configurable trigger functions with adjustable pre-trigger settings allow event-based recording aligned with the measurement task, for example when capturing voltage or current transients, inrush currents or relay dropouts. When configured as an RMS Recorder, the MR8870 calculates up to 1000 RMS values per second based on high resolution sampling. This enables detection of short duration voltage or current deviations during extended monitoring periods without averaging them out. RMS values can be stored at user defined intervals together with minimum and maximum values for each interval. Current measurement with external sensors The MR8870 also measures current using external current clamps or sensors with a voltage output. AC current clamps with BNC connectors can be connected directly to the MR8870's analog inputs for portable industrial measurements. Compatible HIOKI Rogowski sensors support current measurements up to 5000 A, depending on the selected sensor. For higher accuracy or DC current applications, compatible current sensors with ME15W connectors can be used in combination with an external sensor unit for sensor power supply. The measurable current range and frequency response are defined by the selected external sensor, while the overall system bandwidth of the MR8870 is DC to 50 kHz. Logic inputs and probes The MR8870 provides four logic input channels for simultaneous recording of digital signals with analog waveforms. The logic inputs can also be used as trigger source or for time correlation of switching states with measured voltage and current signals. For low-voltage digital and contact signals, the Logic probe 9320-01 supports detection up to 50 V DC, including PLC outputs and open-collector signals, with pulse detection down to 500 ns. For relay drive and mains-level signals, the isolated Logic probe MR9321-01 enables detection of AC or DC signals up to 250 V and can be used for monitoring contactors, relay coils or power line interruptions.Memory, data handling and power supply The MR8870 provides 2 MWords of internal memory per channel for event-based waveform recording at the maximum sampling rate. For extended measurements or continuous logging, data can be stored on a removable memory card. When connected to a PC via USB, the MR8870 appears as a removable drive, providing direct access to files stored on the memory card. Recorded data can be analyzed using compatible software including the Dedicated Wave Processor Program for the 8870-20, WaveViewer or the 9335 Wave Processor. The compact housing weighs approximately 600 g and is designed for handheld use in field environments. The MR8870 can be powered using the included Z1005 AC adapter, an external DC supply or an optional battery pack. Battery operation enables up to two hours of autonomous measurement. The MR8870 is manufactured in Japan.

The MR9000 Printer Unit is designed for use with the Hioki MR8880-20 Memory recorder, enabling easy printouts of measurement results. This compact and efficient printer offers precise waveform documentation directly from the connected Memory HiCorder, making it ideal for fieldwork and quick data review. The MR9000 ensures seamless integration with your HiCorder, delivering accurate and reliable outputs for all your measurement needs. Technical Information: Compatible devices: Hioki MR8880-20 Memory HiCorder Usable recording paper: 9234 Recording Paper Recording width: 104 mm (832-dot resolution), waveform section width 100 mmRecording speed: Max 1 cm/s Paper feed accuracy: ±3% (at 25°C, 60% RH)

The 9234 is a printerpaper for MR8880 (PRINTER UNIT MR9000 required) and 8860, 8861, 8420, 8421, 8422, 8807, 8808, 8714, 8715 memory recorders. Technical Details:Roll type A6 width 112 mm × 18 m 10 rolls/set

Z1002 ist ein Universalnetzteil für Netzspannungen von 100 V bis 240 V AC, 50/60 Hz, das 12V DC, 5,25A max (63W) zur Verfügung stellt. Es ist geeignet für die Hioki-Produkte CT9557, MR8875, MR8880, PW3198, PQ3100, PQ3198.

DC Power cable, 2 m, unprocessed ends, for LR8450, LR8450-01, LR8101, LR8102, MR8875 and MR8880

Power supply unit factory option for current or differential probes used with MR6000 memory recorder systems. HIOKI Z5021 available from HIOKI Europe.

HIOKI MR6000 32-channel modular memory recorder with 200 MS/s sampling, 1000 V isolated inputs and intuitive touchscreen for high-speed multi-channel waveform capture and analysis. Order now from HIOKI Europe.

Durable hard-shell case with wheels and telescoping handle, precisely fitted for MR8875 and accessories.

Wireless Bluetooth adapter for compatible HIOKI instruments enabling remote data transfer and mobile measurement documentation. HIOKI Z3210 available now.