IM3590 - Impedance analyser

20 %

9269-10

The 9296-10 is an optional unit designed to be connected between various HIOKI impedance meters (such as the IM3590, IM3570, IM3533, IM3523, and similar devices) and the main test fixture. It allows the application of a DC bias current for specialized testing scenarios. With a measurement frequency range from 42 Hz to 100 kHz, it extends the functionality of impedance meters. Additionally, it supports a maximum applied voltage of ±40 V DC and a maximum current of ±2 A DC, providing flexibility for a variety of test applications. Technical Details: Measurement frequency range: 42 Hz to 100 kHz (9269-10: 40 Hz to 2 MHz) Maximum applied voltage: ±40 V DC Maximum applied current: ±2 A DC Maximum voltage to earth: ±50 V DC (between L terminal and chassis) Compatibility: Can be connected to various HIOKI impedance meters (IM3590, IM3570, IM3533, IM3523, and similar products)

€502.40* €628.00*

9500-10

9500-10 - 4-TERMINAL PROBE

The 9500-10 4-terminal probe (alligator clip type) connects directly to the measurement terminals of the HIOKI IM series (LCR meters, impedance analyzers). Technical details Measurement frequency range: DC to 200 kHz Maximum rated voltage: ±40 V DC Maximum current: 1 A peak (measurement signal + bias current) • Cable length: approx. 1000 mm Suitable for conductors with a diameter of 0.3 mm to 2 mm Equipped with a 50-Ω coaxial cable Operating temperature: 0°C to 40°C 2D drawing free downloadable.

€338.00*

20 %

9151-02

9151-02 - GP-IB CONNECTOR CABLE

The GPIB connector cable is a 2-meter long cable designed for use with all Hioki products that are equipped with a GPIB interface. This cable ensures reliable connectivity and data transfer for your test and measurement equipment. Technical Details: Cable type: GPIB connector cable Length: 2 meters Compatible devices: All Hioki products with GPIB interface

€270.40* €338.00*

9268-10

9268-10 - DC BIAS VOLTAGE UNIT

The 9268-10 is a DC-Bias voltage application unit that can apply up to 40 VDC, requiring an external power supply. It is easily attached between the impedance meter and the test fixture, providing a seamless setup for testing. With a bandwidth of 40 Hz to 8 MHz, the 9268-10 supports a wide range of measurement applications, accommodating both low and high-frequency testing needs. Technical Details: DC-Bias voltage: Up to 40 VDC (external power supply required) Bandwidth: 40 Hz to 8 MHz Connection: Easily attaches between impedance meter and test fixture Measurement applications: Supports low to high-frequency testing

€628.00*

IM9901

IM9901 - Replacement measuring tips for L2001

Replacement tips for L2001 (regular size) Additional information: 1 set of red and black side tips Measurement samples: 1608 to 5750 (JIS)/ 0603 to 2220 (EIA) "

€58.00*

IM9902

IM9902 - CONTACT TIPS

Contact Tips, to replace the tip on the L2001, small size

€178.00*

L2000

L2000 - 4-TERMINAL PROBE

The Hioki L2000 Test Adapter (4-terminal probe) enables precise and reliable connections between LCR or impedance meters, supporting accurate tests within a frequency range from DC to 8 MHz. It is designed for devices under test (DUTs) with wire diameters up to 5mm. Equipped with gold-plated connections and a durable 1-meter coaxial cable, the L2000 ensures long-lasting performance and stability. It operates within a temperature range of 0°C to 40°C and a humidity level of up to 80%, making it ideal for various environmental conditions. The L2000 is particularly suited for applications requiring high-precision impedance measurements, ensuring reliable and consistent results. Technical Details:Frequency range: DC to 8 MHz Suitable for: DUTs with wire diameters up to 5mm Connections: Gold-plated Cable length: 1 meter coaxial cable Operating temperature: 0°C to 40°CHumidity: Up to 80%

€1,018.00*

L2001

L2001 - PINCHER PROBE

L2001 - Pincher Probe The L2001 Pincher Probe provides precise impedance measurement with a wide frequency range. It is designed for use with the IM3523 and similar products. Technical Details: Cable length: 73 cm Frequency range: DC to 8 MHz Impedance: 50 Ohm Tip electrode spacing: 0.3 to 6 mm Compatibility: IM3523 and similar products

€568.00*

9263

9263 - TEST FIXTURE

The 9263 is a direct connection test fixture designed to measure SMD-type components with a Device Under Test (DUT) size ranging from 1 mm to 10 mm. It operates within a frequency range from DC to 8 MHz, allowing for precise testing of components. The 9263 is compatible with the IM3590, IM3533, IM3523, and related instruments, making it a versatile tool for SMD component measurements. Technical Details: Fixture type: Direct connection DUT size: 1 mm to 10 mm Test frequency range: DC to 8 MHz Compatible with: IM3590, IM3533, IM3523, and related instruments

€908.00*

20 %

9699

9699 - SMD TEST FIXTURE

The 9699 is a direct connection test fixture designed for measuring SMD components with a DUT (Device Under Test) size ranging from 1 mm to 4 mm and a height of 1.5 mm or less. It operates over a wide test frequency range from DC to 120 MHz, making it ideal for high-frequency component testing. The 9699 is compatible with HIOKI devices such as the IM3590, IM3533, IM3523, and related instruments, ensuring precise and reliable measurements for SMD components. Technical Details: Fixture type: Direct connection DUT size: 1 mm to 4 mm DUT height: 1.5 mm or less Test frequency range: DC to 120 MHz Compatible with: IM3590, IM3533, IM3523, and related devices

€998.40* €1,248.00*

9262

9262 - TEST FIXTURE

The 9262 is a direct connection fixture designed to measure lead-type components with conductor diameters ranging from 0.3 to 2 mm and a minimum lead spacing of 5 mm. It operates within a frequency range of DC to 8 MHz, making it suitable for various testing applications. The fixture is compatible with the IM3590, IM3533, IM3523, and related instruments, ensuring accurate and reliable measurements of lead-type components. Technical Details: • Fixture type: Direct connection • Conductor diameter: 0.3 to 2 mm • Minimum lead spacing: 5 mm • Test frequency range: DC to 8 MHz • Compatible with: IM3590, IM3533, IM3523, and related instruments

€518.00*

20 %

9677

9677 - SMD TEST FIXTURE

The SMD Test Fixture is designed for accurate and efficient measurement of surface-mount devices (SMDs) with side electrodes. Its direct connection type ensures a reliable testing process, making it an ideal accessory for the IM3570 and similar products. Technical Details: Connection type: Direct Frequency range: DC to 120 MHz Suitable for measuring SMDs with side electrodes Test sample dimensions: 3.5 mm ± 0.5 mm Compatible with IM3570 and similar devices

€814.40* €1,018.00*

20 %

9478

9478 - SHEATH TYPE TEMPERATURE PROBE

€134.40* €168.00*

Z3001

Z3001 - RS-232C Interface for IM3590

Optional RS232c interface card for installation in the IM3523, IM3533, IM3533-01, IM3590, IM7580A, IM7581, IM7583, IM7585, IM7587 impedance meters.Product details Depth: 89.2mm (incl. plug protrusion (7mm) Width: 90 mm Height: 28 mm Weight: 60g Recommended cable: 9637 RS-232C Cable

€458.00*

Z3000

Z3000 - GPIB Interface

Optional GPIB interface card for installation in the IM3523, IM3533, IM3533-01, IM3590, IM7580A, IM7581, IM7583, IM7585, IM7587 impedance meters. Product details: Depth: 92mm (incl. plug protrusion (10mm) Width: 90 mmHeight: 28 mm Weight: 110 g Recommended GPIB cable: 9151-02 (2m), 9151-04 (4m)

€518.00*

20 %

Z3002

Z3002 - LAN Interface

Z3002 - LAN Interface The Z3002 LAN Interface enables efficient data transfer for the IM3590, IM3523, and IM3533 series, providing seamless network connectivity for data management. Technical Details: Compatibility: IM3590, IM3523/33 series

€454.40* €568.00*

9261-10

9261-10 - TEST FIXTURE

The test fixture 9261-10 is designed for use with IM3590, IM3570, IM3533, IM3523, and similar products. It consists of a test box and a 1-meter 4-pole BNC cable, offering an impedance characteristic of 50 Ohms. The fixture supports measurements within a range from DC to 8 MHz. It accommodates test objects with conductor diameters from 0.3 mm to 1.5 mm, making it suitable for various precision testing tasks. Technical Details: Compatible with: IM3590, IM3570, IM3533, IM3523, and similar products Components: Test box, 1m 4-pole BNC cable Impedance: 50 Ohms Measurement range: DC to 8 MHz Test object conductor diameter: 0.3 mm to 1.5 mm

€798.00*

9140-10

9140-10 4-Terminal Probe

The 9140-10 is a 4-terminal probe equipped with Kelvin clamps and BNC connectors, designed as an optional accessory for products like the IM3590, IM3570, IM3533, IM3523, and similar devices. It operates across a frequency range from DC to 200 kHz. The Kelvin clamps are capable of handling conductor diameters between 0.3 and 5 mm, offering flexibility for various testing needs. The probe has an impedance of 50 Ohms, ensuring reliable performance in precision measurements. Technical Details: Type: 4-terminal probe Connectors: Kelvin clamps, BNC connectors Frequency range: DC to 200 kHz Conductor diameter range: 0.3 to 5 mm Impedance: 50 Ohms Compatible devices: IM3590, IM3570, IM3533, IM3523, and similar products

€338.00*

20 %

9269-10

9269-10 - DC BIAS CURRENT UNIT

The 9296-10 is an optional unit designed to be connected between various HIOKI impedance meters (such as the IM3590, IM3570, IM3533, IM3523, and similar devices) and the main test fixture. It allows the application of a DC bias current for specialized testing scenarios. With a measurement frequency range from 42 Hz to 100 kHz, it extends the functionality of impedance meters. Additionally, it supports a maximum applied voltage of ±40 V DC and a maximum current of ±2 A DC, providing flexibility for a variety of test applications. Technical Details: Measurement frequency range: 42 Hz to 100 kHz (9269-10: 40 Hz to 2 MHz) Maximum applied voltage: ±40 V DC Maximum applied current: ±2 A DC Maximum voltage to earth: ±50 V DC (between L terminal and chassis) Compatibility: Can be connected to various HIOKI impedance meters (IM3590, IM3570, IM3533, IM3523, and similar products)

€502.40* €628.00*

9500-10

9500-10 - 4-TERMINAL PROBE

The 9500-10 4-terminal probe (alligator clip type) connects directly to the measurement terminals of the HIOKI IM series (LCR meters, impedance analyzers). Technical details Measurement frequency range: DC to 200 kHz Maximum rated voltage: ±40 V DC Maximum current: 1 A peak (measurement signal + bias current) • Cable length: approx. 1000 mm Suitable for conductors with a diameter of 0.3 mm to 2 mm Equipped with a 50-Ω coaxial cable Operating temperature: 0°C to 40°C 2D drawing free downloadable.

€338.00*

20 %

9151-02

9151-02 - GP-IB CONNECTOR CABLE

The GPIB connector cable is a 2-meter long cable designed for use with all Hioki products that are equipped with a GPIB interface. This cable ensures reliable connectivity and data transfer for your test and measurement equipment. Technical Details: Cable type: GPIB connector cable Length: 2 meters Compatible devices: All Hioki products with GPIB interface

€270.40* €338.00*

9268-10

9268-10 - DC BIAS VOLTAGE UNIT

The 9268-10 is a DC-Bias voltage application unit that can apply up to 40 VDC, requiring an external power supply. It is easily attached between the impedance meter and the test fixture, providing a seamless setup for testing. With a bandwidth of 40 Hz to 8 MHz, the 9268-10 supports a wide range of measurement applications, accommodating both low and high-frequency testing needs. Technical Details: DC-Bias voltage: Up to 40 VDC (external power supply required) Bandwidth: 40 Hz to 8 MHz Connection: Easily attaches between impedance meter and test fixture Measurement applications: Supports low to high-frequency testing

€628.00*

IM9901

IM9901 - Replacement measuring tips for L2001

Replacement tips for L2001 (regular size) Additional information: 1 set of red and black side tips Measurement samples: 1608 to 5750 (JIS)/ 0603 to 2220 (EIA) "

€58.00*

IM9902

IM9902 - CONTACT TIPS

Contact Tips, to replace the tip on the L2001, small size

€178.00*

L2000

L2000 - 4-TERMINAL PROBE

The Hioki L2000 Test Adapter (4-terminal probe) enables precise and reliable connections between LCR or impedance meters, supporting accurate tests within a frequency range from DC to 8 MHz. It is designed for devices under test (DUTs) with wire diameters up to 5mm. Equipped with gold-plated connections and a durable 1-meter coaxial cable, the L2000 ensures long-lasting performance and stability. It operates within a temperature range of 0°C to 40°C and a humidity level of up to 80%, making it ideal for various environmental conditions. The L2000 is particularly suited for applications requiring high-precision impedance measurements, ensuring reliable and consistent results. Technical Details:Frequency range: DC to 8 MHz Suitable for: DUTs with wire diameters up to 5mm Connections: Gold-plated Cable length: 1 meter coaxial cable Operating temperature: 0°C to 40°CHumidity: Up to 80%

€1,018.00*

L2001

L2001 - PINCHER PROBE

L2001 - Pincher Probe The L2001 Pincher Probe provides precise impedance measurement with a wide frequency range. It is designed for use with the IM3523 and similar products. Technical Details: Cable length: 73 cm Frequency range: DC to 8 MHz Impedance: 50 Ohm Tip electrode spacing: 0.3 to 6 mm Compatibility: IM3523 and similar products

€568.00*