HIOKI Z5021 - Power supply unit for current or differential probes, factory option for MR6000

Power supply unit for up to 8 current clamps of the HIOKI CT670x/327x Series, up to 4 current clamps of the HIOKI CT671x Series, up to eight HIOKI 9322 or up to three P9000 differential probes, factory option for MR6000, 12 VDC and 0.6 A per terminal

Content: 1 Box

Product number: Z5021

Product information HIOKI Z5021 - Power supply unit for current or differential probes, factory option for MR6000

The HIOKI Z5021 Probe Power Unit for the MR6000 Memory Recorder is a factory-installed option designed to provide power to up to eight current probes or clamps from the CT670x or 327x Series. Additionally, the Z5021 supports up to four CT6710 or CT6711 current clamps. For applications requiring higher voltages the Z5021 can power up to eight 9322 or up to three P9000 Differential Probes.

It delivers a stable output voltage of ±12 V DC and a rated output current of 0.6 A per terminal.

The Z5021 must be ordered together with the main instrument at the time of purchase. For an installation at a later stage, the main instrument needs to be sent to a HIOKI service center.

More than specs – find more details here:
Save 20% now on DAQ-Bundle MR6000-MAX

Z5021 Power supply

Related products

MR6000

HIOKI MR6000 - Modular 32-channel memory recorder, 200 MS/s, 1000 V direct input, touchscreen

Modular memory recorder, up to 32 channels, max. sampling rate 200 MS/s, max 1000 VDC isolated direct voltage input, up to 1 TB storage with SSD option, intuitive user interface, touchscreen, real-time waveform calculation and real-time saving

CT6700

HIOKI CT6700 - AC/DC Current Probe, 5 A / 50 MHz

Hall sensor based zero-flux current probe suitable for capturing very small to high-speed currents, wide bandwidth from DC to 50 MHz, measurable continuous current from 1 mA to 5 A, high signal-to-noise ratio, standard BNC oscilloscope connectivity, built-in overload protection

€2,988.00

View product

CT6701

HIOKI CT6701 - AC/DC Current Probe, 5 A / 120 MHz

Hall sensor based zero-flux current probe suitable for capturing very small to high-speed currents, wide bandwidth from DC to 120 MHz, measurable continuous current from 1 mA to 5 A, high signal-to-noise ratio, standard BNC oscilloscope connectivity, built-in overload protection

€3,568.00

View product

CT6710

HIOKI CT6710 - AC/DC multi-range current probe, 30 A / 50 MHz

Hall sensor based zero-flux current probe suitable for capturing micro to very fast currents, wide bandwidth from DC to 50 MHz, measurable current from 200 μA to 30 A in 3 ranges (500 mA, 5 A, 30 A), high signal-to-noise ratio, standard BNC oscilloscope connectivity, built-in overload protection

€4,758.00

View product

CT6711

HIOKI CT6711 - AC/DC multi-range Current Probe, 30 A / 120 MHz

Hall sensor based zero-flux current probe suitable for capturing micro to high-speed currents, wide bandwidth from DC to 120 MHz, measurable current from 200 µA to 30 A in 3 ranges (500 mA, 5 A, 30 A), high signal-to-noise ratio, standard BNC oscilloscope connectivity, builtin overload protection

€5,598.00

View product

3273-50

HIOKI 3273-50 - AC/DC Current Probe, 30 A / 50 MHz

Hall sensor based zero-flux current probe suitable for capturing small to high-speed currents

€2,748.00

View product

3274

HIOKI 3274 - AC/DC Current Probe, 150 A / 10 MHz

Hall sensor based zero-flux current probe suitable for capturing small to high-speed currents

€3,338.00

View product

3275

HIOKI 3275 - AC/ DC Current Probe, 500 A / 2 MHz

Hall sensor based zero-flux current probe suitable for capturing small to high-speed currents, wide bandwidth from DC to 2 MHz, measurable continuous current up to 500 A, high signal-to-noise ratio, standard BNC oscilloscope connectivity, built-in overload protection

€4,058.00

View product

3276

HIOKI 3276 - AC/DC Current Probe, 30 A / 100 MHz

Hall sensor based zero-flux current probe suitable for capturing small to high-speed currents, wide bandwidth from DC to 100 MHz, measurable continuous current from 10 mA to 30 A, high signal-to-noise ratio, standard BNC oscilloscope connectivity, built-in overload protection

€3,568.00

View product

9322

9322 - Differential probe

The Hioki 9322 Differential Probe is a versatile 3-in-1 probe designed for the floating measurement of high-voltage waveforms, detecting power line surge noise, and providing true RMS rectified output of high-voltage AC. With the ability to handle up to 2000 V DC and 1000 V AC (CAT II), the 9322 ensures safe and accurate measurements even in demanding environments. This probe is compatible with the Memory Memory recorder series and can be powered via an AC adapter or Hioki’s Probe Power Unit Z5021. It offers a wide frequency range for detecting high-frequency components, making it ideal for inverter circuits and power supply noise detection. Technical details: Measurement functions: o DC mode: Waveform monitor output, DC to 10 MHz ±3 dB o AC mode: Detection of power line surge noise, 1 kHz to 10 MHz ±3 dB o RMS mode: Rectified RMS output of DC and AC voltages, DC, 40 Hz to 100 kHz o Response speed: 200 ms or less (400 V AC) Max. allowable input: 2000 V DC, 1000 V AC Max. rated voltage to earth: o 1000 V AC/DC (CAT II) when using the Grabber Clip L9243 o 1000 V AC/DC (CAT II), 600 V AC/DC (CAT III) when using alligator clips Output: Voltage division ratio 1/1000, BNC terminal (3-mode selectable: DC/AC/RMS) • DC amplitude accuracy: ±1% f.s. (1000 V DC or less), ±3% f.s. (2000 V DC) RMS amplitude accuracy: ±1% f.s. (DC, 40 Hz to 1 kHz), ±4% f.s. (1 kHz to 100 kHz)Input resistance and capacity: o H-L: 9 MΩ, approx. 10 pF (at 100 kHz) o H-case, L-case: 4.5 MΩ, approx. 20 pF (at 100 kHz) Power supply: o General requirement: +5 V to +12 V, less than 300 mA (DC jack OD 5.5 mm, ID 2.1mm)Hioki provided power supplies: o AC Adapter 9418-15 o Z5021combined plus Power Cord 9248 o Use of Logic terminal on Memory Recorder plus Power Cord 9324 o Use of sensor terminal of F/V Unit 8940 plus Power Cord 9325 o Use of DC power output terminal attached to the input unit for the 8855 through Power Cord 9328 o Via the 8860 series Probe Power Unit 9687 plus Power Cord 9248 Dimensions and mass: 70 mm (W) × 150 mm (H) × 25 mm (D), 350 g, Cord length: Input 46 cm, Output 1.3 m

€778.00

View product

P9000-01

P9000-01 - Differential probe

The Differential Probe P9000-01 is designed to offer superior flexibility for waveform monitoring in high-voltage environments. Ideal for use with Hioki Memory Reorders and Dataloggers, it allows accurate and reliable measurement in various industrial applications, such as electric vehicles, solar power systems, and commercial power circuits. Compact and lightweight, this probe offers 1000 V AC/DC measurements with a choice between 1000:1 and 100:1 division ratios. With a robust operating temperature range, it ensures performance even in challenging conditions. Technical Specifications: Measurement Functions: Waveform monitor output only Frequency Characteristics (Wave Mode): DC to 100 kHz, -3 dB Division Ratio: 1000:1 or 100:1 (user selectable) DC Amplitude Accuracy: ±0.5% f.s. Input Resistance and Capacity: 10.5 MΩ, 5 pF or less (at 100 kHz) Maximum Allowable Input: 1000 V AC/DCMax. Rated Voltage to Earth: 1000 V AC/DC (CAT III) Operating Temperature Range: -40°C to 80°CPower Supply Options: o AC Adapter (Z1008), USB, External DC (2.7V to 15V DC)Dimensions: 128 mm (W) × 36 mm (H) × 22 mm (D) Mass: 170 g Cord Length: Input 70 cm; Output 1.5 m

€508.00

View product

P9000-02

P9000-02 - Differential probe

The Differential Probe P9000-02 combines waveform monitoring with AC RMS value output, offering increased versatility for high-voltage applications. With the capability to monitor waveforms and RMS values, it is suitable for industrial applications such as electric vehicle battery circuits, solar power systems, and commercial high-voltage circuits. The probe is lightweight, compact, and offers high accuracy across a wide range of operating temperatures, ensuring durability and performance in demanding conditions. Technical Specifications: Measurement Functions: Waveform monitor output and AC RMS value output (switchable) Frequency Characteristics (Wave Mode): DC to 100 kHz, -3 dB Frequency Characteristics (RMS Mode): 30 Hz to 10 kHz RMS Amplitude Accuracy: ±1% f.s. (30 Hz to 1 kHz); ±3% f.s. (1 kHz to 10 kHz) Response Time (RMS Mode): 300 ms (rising), 500 ms (falling) Division Ratio: 1000:1 or 100:1 (user selectable) DC Amplitude Accuracy: ±0.5% f.s. Input Resistance and Capacity: 10.5 MΩ, 5 pF or less (at 100 kHz) Maximum Allowable Input: 1000 V AC/DC Max. Rated Voltage to Earth: 1000 V AC/DC (CAT III) Operating Temperature Range: -40°C to 80°C Power Supply Options: o AC Adapter (Z1008), USB, External DC (2.7V to 15V DC) Dimensions: 128 mm (W) × 36 mm (H) × 22 mm (D) Mass: 170 g Cord Length: Input 70 cm; Output 1.5 m

€648.00

View product

The right purchasing route for your HIOKI products

Whether you order directly from HIOKI or purchase through a local partner: many companies rely on existing suppliers, approved vendors or regional procurement processes. Our authorized HIOKI partners can support local quotation, ordering and purchasing processes.

Find a HIOKI partner near you Any questions?

👤

Partners in your region

Authorized HIOKI partners can support local purchasing in your region.

💬

Fits your purchasing process

Ideal for companies that order through approved vendors or existing suppliers.

✓

Local handling

Quotation, ordering and communication through a contact in your region.