HIOKI CT6875A - AC/DC Current sensor, 500 A / 2 MHz

€1,788.00

Content: 1 Each

In stock in Germany

€1,788.00

HIOKI CT6875A - AC/DC Current sensor, 500 A / 2 MHz

Product number: CT6875A

Available stock: 1

GTIN/EAN: 4536036013913

Width: 500 mm

Height: 1120 mm

Weight: 1.06 kg

Product details

Product information HIOKI CT6875A - AC/DC Current sensor, 500 A / 2 MHz

The HIOKI CT6875 AC/DC Current Sensor is designed for accurate current measurements across a broad frequency range, from DC to 2 MHz (Model CT6875-01: DC to 1.5 MHz). With a rated current of 500 A, it is ideal for R&D, quality evaluation, manufacturing, and maintenance in industries such as wireless charging systems, inverter motors, PV power conditioners, and EV quick charging facilities. In combination with the Power Analyzer PW8001, the sensor allows for precise high-frequency and low power factor measurements.

Technical Details:

Rated Current: 500 A
Frequency Bandwidth: CT6875: DC to 2 MHz
Basic Accuracy: Amplitude: ±0.04 % rdg. ±0.008 % f.s., Phase: ±0.08°
Maximum Conductor Diameter: 36 mm
Maximum Rated Voltage to Ground: 1000 V CAT III
Operating Temperature: -40°C to 85°C
Input Impedance Requirement: 1 MΩ or higher
Output Terminal: ME15W
Cable length: 3m

More than specs – find more details here:
Measure Power with Precision – Across All Applications

Related products

PW8001

HIOKI PW8001 - Modular 8-channel High Precision Power Analyzer

Modular high precision power analyzer, up to 8 channels, ±0.03% basic accuracy, 15 MHz sampling rate, 18-bit A/D conversion, automatic phase shift correction for Hioki current sensors, 1 ms data update rate, CMRR 110 dB @ 100 kHz

PW3390

HIOKI PW3390 - Portable 4-channel Power Analyzer

Portable 4-channel Power Analyzer, ±0.09% basic accuracy, DC to 200 kHz measurement band for power, 16-bit conversion, phase shift correction for HIOKI current sensors, 50 ms data update rate, 16-ch waveform/analog output, motor analysis function, WLTP compliant

PW3336

HIOKI PW3336 - AC/DC Power Meter

The PW3336 series measures power across a wide range of electrical equipment, from single-phase devices to industrial three-phase systems using 2 input channels.

€4,058.00

View product

PW3337

HIOKI PW3337 - 3-channel AC/DC power meter up to 65 A and 1000 V

3-channel AC/DC Power Meter, voltage up to 1000 V, direct current input up to 65 A without internal shunts, 5000 A via external sensors, frequency bandwidth DC to 100 kHz, IEC 61000-4-7 harmonic analysis, LAN and RS-232C interface

€5,598.00

View product

CT9902

HIOKI CT9902 - Extension Cable

The HIOKI CT9902 is a 5-meter extension cable designed for use with ME15W-equipped current transformers (CTs), providing additional length for versatile installations.

€248.00

View product

MR8875

HIOKI MR8875 - Portable, modular memory recorder, 500 kS/s, 16 isolated ch., 1000 V direct input, touchscreen

The HIOKI MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)

€4,998.00

View product

CT9555

HIOKI CT9555 - Current Sensor Interface, 1-Channel

1 channel current sensor interface for current sensors, clamps and probes with ME15W connectors, sensor power supply, BNC waveform output

€508.00

View product

MR8905

HIOKI MR8905 - 2-channel voltage module for MR8875, 500 kS/s, 1000 VDC

The MR8905 Analog Unit is a 2-channel voltage input module for the memory recorder MR8875. It enables voltage measurement of instantaneous values and AC RMS values. Each channel supports measurement ranges from 500 mV to 50 V/div. The module uses 16-bit A/D conversion and supports simultaneous sampling across both channels at up to 500 kS/s. The frequency characteristics extend from DC to 100 kHz (–3 dB).The module supports RMS measurement with defined accuracy and response time. Input coupling modes DC, AC-RMS, and GND are selectable. The maximum allowable input voltage is 1000 V DC or 700 V AC. The maximum rated voltage to earth is CAT II 1000 V AC/DC and CAT III 600 V AC/DC. Typical applications include voltage measurement, RMS evaluation, and waveform analysis in laboratory and industrial environments. Technical specifications Channels: 2 (voltage, instantaneous / AC RMS selectable) Input: banana connector, 4 MΩ, <1 pFMeasurement range: 500 mV to 50 V/divAccuracy: ±0.5 % f.s. (instantaneous), ±1.5 % / ±3 % f.s. (RMS, frequency-dependent) Sampling / resolution: 500 kS/s simultaneous, 16-bit (1/1250) Frequency characteristics: DC to 100 kHz (–3 dB) Low-pass filter: 5, 50, 500 Hz, 5 kHz, OFF Input coupling: DC, AC-RMS, GNDMaximum input: 1000 V DC, 700 V AC Maximum rated voltage to earth: CAT II 1000 V AC/DC, CAT III 600 V AC/DC

€1,558.00

View product

CT9556

HIOKI CT9556 - Current Sensor Interface, 1-Channel, with RMS Output

1 channel current sensor interface for current sensors, clamps and probes with ME15W connectors, sensor power supply, BNC waveform output, BNC RMS output

€668.00

View product

CT9557

HIOKI CT9557 - Current Sensor Interface, 4-Channel

4 channel current sensor interface for current sensors, clamps and probes with ME15W connectors, sensor power supply, 4 ch BNC waveform outputs, BNC total waveform output, BNC total RMS output

€1,618.00

View product

L9217

HIOKI L9217 - BNC Cable, Insulated, 1.6 m

Insulated BNC cable, BNC plugs on both ends, plastic connector housings, ferrite for noise suppression, 1.6 m cable length, rated voltage 300 V, CAT III 300 V / CAT II 600 V, made in Japan

€78.00

View product

9165

9165 - BNC Cable

The 9165 is a 1550 mm long BNC to BNC coaxial cable for reliable signal transmission in test and measurement applications. It features an RG-58A/U coaxial cable with 50 Ohm BNC connectors (BNCP-58A) at both ends and offers high signal integrity. Precision manufacturing makes it ideal for laboratory applications.Technical details: Cable type: RG-58A/U coaxialConnector type: BNC (BNCP-58A), 50 OhmLength: 1550 mm (+20 mm tolerance)Typical Applications Reliable signal transmission for testing and measurement

€48.00

View product

LR8101

HIOKI LR8101 - Modular multi-channel Data Logger for system integration

Main unit for system integration applications, modular system, max. 300 voltage/temperature or 12 power channels, for high voltage/high current applications, max. update interval 5 ms, for 19” rack systems

€2,168.00

View product

LR8102

HIOKI LR8102 - Modular multi-channel Data Logger for system integration, optical sync, UDP, CAN

Main unit for system integration applications, modular system, max. 3000 voltage/temperature channels or 120 power channels, for high voltage/high current applications, real-time data transfer via UDP, max. update interval 5 ms, for 19” rack systems

The right purchasing route for your HIOKI products

Whether you order directly from HIOKI or purchase through a local partner: many companies rely on existing suppliers, approved vendors or regional procurement processes. Our authorized HIOKI partners can support local quotation, ordering and purchasing processes.

Find a HIOKI partner near you Any questions?

👤

Partners in your region

Authorized HIOKI partners can support local purchasing in your region.

💬

Fits your purchasing process

Ideal for companies that order through approved vendors or existing suppliers.

✓

Local handling

Quotation, ordering and communication through a contact in your region.