9661 CLAMP ON SENSOR

The PW3336 series measures power across a wide range of electrical equipment, from single-phase devices to industrial three-phase systems using 2 input channels. It supports voltages up to 1000 V, direct currents up to 65 A, and up to 5000 A with an optional current sensor. Covering both DC and inverter frequencies, it is ideal for motors, inverters, and power supplies, and is suitable for single-phase to 3P3W equipment. Technical Details: Compatible with SPECpower® benchmark for server power consumptionMeasures DC, single-phase 2-wire, and 3-phase 3-wire with 2-channel input High-precision basic accuracy of ±0.1% Frequency bandwidth of 0.1 Hz to 100 kHz or DCHigh-current measurement up to 65 A of direct inputHarmonic measurement up to the 50th order (IEC 61000-4-7) Accurate measurement with low power factor for no-load testing Built-in external sensor input terminals for up to 5000 A ACSynchronize up to 8 units for multi-unit measurement

The PW3337 Power Meter is a versatile and precise device designed to measure power consumption in three-phase and single-phase systems. It supports direct input up to 1000 V AC/DC and 65 A, making it ideal for analyzing energy consumption in industrial equipment, renewable energy systems, and power conditioners.With its wide frequency range, from DC to 100 kHz, and built-in harmonic measurement capabilities compliant with IEC61000-4-7 standards, the PW3337 offers reliable performance for both AC and DC power measurements. Its advanced communication interfaces, including LAN, RS-232C, and GP-IB, make it suitable for automated testing environments and real-time monitoring. Technical Information:Number of Channels: 3 (AC/DC) Measurement Ranges: o Voltage: 15 V to 1000 V o Current: 200 mA to 65 A Frequency Range: DC, 0.1 Hz to 100 kHz Basic Accuracy: ±0.1% of readingHarmonic Measurement: IEC61000-4-7 compliant Interfaces: LAN, RS-232C, GP-IB (model dependent) Maximum Rated Power: 40 VA Dimensions: 305 mm (W) × 132 mm (H) × 256 mm (D) Weight: Approx. 5.6 kg

The Hioki MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)

Banner Specs: 8 slots for modules with up to 32 isolated analog channels 15 different input and 3 output modules High-speed data sampling with 200 MS/s Real-time data saving with up to 20 MS/s User-friendly software and touchscreen display Compatibility with a wide variety of HIOKI current sensors Applications: Testing and evaluation of railway, aerospace and automotive components including electric vehicle motors, inverters, and battery systems Development and maintenance of renewable energy technologies, such as wind turbines and solar panels - monitoring electrical outputs and mechanical performance Testing of household and industrial appliances by capturing high-speed transient events and long-term trends Monitoring of SMPS (Switched-Mode Power Supply) output currents over extended periods with high sampling rates Electric Vehicle (EV) motor shaft angle sensing thanks to its built-in resolver calculation functionIn detail:The MR6000 Memory Recorder is a high-performance waveform recorder designed for capturing high-speed, high-accuracy data across multiple channels. It is ideal for complex applications such as inverter testing, ECU signal analysis, and monitoring physical phenomena. Featuring user-friendly software, a touchscreen interface, and various calculation and analysis functions, the MR6000 ensures precise and efficient data acquisition for professionals in research, development, and industrial settings.Input and Output Modules: The MR6000 offers exceptional versatility with its plug-and-play modular design with 8 slots. Modules can be easily swapped and are automatically recognized by the device. The MR6000 supports 15 different input modules for various measurements, such as high voltage monitoring up to 1000 VDC/700 VAC with the U8974, multi-channel configurations using the U8975 for up to 32 channels, and high-speed applications with the U8978, which offers a sampling rate of 200 MS/s. DC modules with 24-bit resolution allow ultra-precise voltage measurements with a resolution of 0.1 µV. The MR6000 also supports three output modules, including pulse and waveform generation for signal testing and simulation. The Arbitrary Waveform Generator Module U8793 allows users to program and generate custom waveforms, ideal for reproducing and simulating anomalies. The free SF8000 software simplifies waveform creation by enabling direct data input or formula-based design and supports noise simulation or multiplying waveforms for advanced scenarios. Current Measurement: The MR6000 offers additional versatility by allowing the direct connection of HIOKI's highaccuracy current sensors. Wideband current probes like the CT6711 can be paired with analog modules such as the U8978. The dedicated current modules U8977 and 8971 support precise measurement across a wide range of currents, working seamlessly with high-precision clamps and sensors like the CT6841A or CT6904A. With these designated current modules, the MR6000 automatically recognizes, and powers connected HIOKI sensors and clamps, ensuring an easy and efficient setup. HIOKI wideband current probes with BNC and 2-pin LEMO connectors can also be powered via the Z5021 Probe Power Unit, which is available as a factory-installed option. In addition to powering current probes and clamps, the Z5021 Probe Power Unit can supply power to up to eight differential probes. This significantly expands the MR6000’s capabilities for high-voltage measurements, supporting voltages up to 2000 VDC and 1000 VAC. Data Handling: Equipped with advanced internal processing, the MR6000 enables fast data saving and efficient handling, reducing downtime and enhancing productivity. For long-term recording, the high-capacity SSD Unit U8332 option allows continuous data capture at high sampling rates. The MR6000-01 model enables real-time data saving at speeds of up to 20 MS/s. User Interface: The MR6000 features a large 12.1-inch touchscreen with a user-friendly interface. Its intuitive design makes it easy for users to view and analyze their data effortlessly. Software Tools: The MR6000 offers comprehensive software analysis tools, including the free MR6000 Viewer for data analysis, 9335 Wave Processor for waveform management, GENNECT One for centralized control of up to 30 HIOKI instruments via LAN. In addition, drivers for custom applications like LabVIEW and MATLAB are available. Models: The MR6000 is offered in two models: the standard MR6000 and the advanced MR6000-01, which includes two additional features – real-time waveform calculation and real-time data saving. The real-time waveform calculation function enables users to monitor calculated results instantly during measurements, providing immediate insights.The real-time saving function allows data to be recorded at a maximum sampling rate of 20 MS/s directly onto an external memory device. This feature offers several key benefits: Long-term recording with up to 20 MS/s Extended recording durations, limited only by the storage capacity of the external device Record on the SSD, USB stick or choose any other device (via FTP)Data integrity with non-volatile memory ensures recorded data stays secure and ready for retrieval, even when the device is powered off

Compact 2-channel data logger, AC current logging with BNC current sensors, Bluetooth, max. 500 000 data points/channel, AC, DC or battery operation Banner Specs: 2 channels for BNC current sensors 500 mA - 2000 A AC Bluetooth data transfer Internal memory: Up to 500 000 data points per channel Power supply with AA alkaline batteries, AC adapter, external DC power supply USPs:  Precise current measurement with HIOKI current sensors Applications: High-accuracy long-term current logging in confined spaces where wireless data acquisition and transfer is required Product In detail:The compact LR8513 Wireless Clamp Logger is a 2-channel data logger to record AC load and leak currents. A wide variety of current sensors can be connected to the logger’s BNC inputs, allowing current measurements from 500 mA to 2000 A AC. The logger fits neatly inside distribution panels, enabling seamless external monitoring. Power measurements can be easily conducted by setting the voltage and power factor. Thanks to the Bluetooth® connectivity data can be easily downloaded to tablets or computers. Up to 500,000 data points per channel can be stored in the internal memory, making it ideal for long-term monitoring and analysis. The LR8513 can be powered with an optional AC adapter, AA alkaline batteries or with an external DC power supply.

The LR5051 pocket-sized logger records load and leakage currents across two channels, featuring high accuracy and compact design for easy deployment. Technical Details: Current range: 500 mA to 1000 A AC rms Accuracy: +/- 2%rdg, +/- 0.13%f.s. Memory: 60,000 data points, 2ch memory Recording intervals: Starting from 1s