9018-50 - AC Current Probe

Banner Specs: 8 slots for modules with up to 32 isolated analog channels 15 different input and 3 output modules High-speed data sampling with 200 MS/s Real-time data saving with up to 20 MS/s User-friendly software and touchscreen display Compatibility with a wide variety of HIOKI current sensors Applications: Testing and evaluation of railway, aerospace and automotive components including electric vehicle motors, inverters, and battery systems Development and maintenance of renewable energy technologies, such as wind turbines and solar panels - monitoring electrical outputs and mechanical performance Testing of household and industrial appliances by capturing high-speed transient events and long-term trends Monitoring of SMPS (Switched-Mode Power Supply) output currents over extended periods with high sampling rates Electric Vehicle (EV) motor shaft angle sensing thanks to its built-in resolver calculation functionIn detail:The MR6000 Memory Recorder is a high-performance waveform recorder designed for capturing high-speed, high-accuracy data across multiple channels. It is ideal for complex applications such as inverter testing, ECU signal analysis, and monitoring physical phenomena. Featuring user-friendly software, a touchscreen interface, and various calculation and analysis functions, the MR6000 ensures precise and efficient data acquisition for professionals in research, development, and industrial settings.Input and Output Modules: The MR6000 offers exceptional versatility with its plug-and-play modular design with 8 slots. Modules can be easily swapped and are automatically recognized by the device. The MR6000 supports 15 different input modules for various measurements, such as high voltage monitoring up to 1000 VDC/700 VAC with the U8974, multi-channel configurations using the U8975 for up to 32 channels, and high-speed applications with the U8978, which offers a sampling rate of 200 MS/s. DC modules with 24-bit resolution allow ultra-precise voltage measurements with a resolution of 0.1 µV. The MR6000 also supports three output modules, including pulse and waveform generation for signal testing and simulation. The Arbitrary Waveform Generator Module U8793 allows users to program and generate custom waveforms, ideal for reproducing and simulating anomalies. The free SF8000 software simplifies waveform creation by enabling direct data input or formula-based design and supports noise simulation or multiplying waveforms for advanced scenarios. Current Measurement: The MR6000 offers additional versatility by allowing the direct connection of HIOKI's highaccuracy current sensors. Wideband current probes like the CT6711 can be paired with analog modules such as the U8978. The dedicated current modules U8977 and 8971 support precise measurement across a wide range of currents, working seamlessly with high-precision clamps and sensors like the CT6841A or CT6904A. With these designated current modules, the MR6000 automatically recognizes, and powers connected HIOKI sensors and clamps, ensuring an easy and efficient setup. HIOKI wideband current probes with BNC and 2-pin LEMO connectors can also be powered via the Z5021 Probe Power Unit, which is available as a factory-installed option. In addition to powering current probes and clamps, the Z5021 Probe Power Unit can supply power to up to eight differential probes. This significantly expands the MR6000’s capabilities for high-voltage measurements, supporting voltages up to 2000 VDC and 1000 VAC. Data Handling: Equipped with advanced internal processing, the MR6000 enables fast data saving and efficient handling, reducing downtime and enhancing productivity. For long-term recording, the high-capacity SSD Unit U8332 option allows continuous data capture at high sampling rates. The MR6000-01 model enables real-time data saving at speeds of up to 20 MS/s. User Interface: The MR6000 features a large 12.1-inch touchscreen with a user-friendly interface. Its intuitive design makes it easy for users to view and analyze their data effortlessly. Software Tools: The MR6000 offers comprehensive software analysis tools, including the free MR6000 Viewer for data analysis, 9335 Wave Processor for waveform management, GENNECT One for centralized control of up to 30 HIOKI instruments via LAN. In addition, drivers for custom applications like LabVIEW and MATLAB are available. Models: The MR6000 is offered in two models: the standard MR6000 and the advanced MR6000-01, which includes two additional features – real-time waveform calculation and real-time data saving. The real-time waveform calculation function enables users to monitor calculated results instantly during measurements, providing immediate insights.The real-time saving function allows data to be recorded at a maximum sampling rate of 20 MS/s directly onto an external memory device. This feature offers several key benefits: Long-term recording with up to 20 MS/s Extended recording durations, limited only by the storage capacity of the external device Record on the SSD, USB stick or choose any other device (via FTP)Data integrity with non-volatile memory ensures recorded data stays secure and ready for retrieval, even when the device is powered off

The MR8880 is a 4 channel portable data acquisition system (DAQ) with a maximum sampling rate of 1Msamples/s on all analog channels simultaneously. It has 4 analog direct input channels for voltages up to 600V and 8 logic channels.Technical Details:   Complies CAT III 600V isolation for direct measure of 480V power line 4 complete isolated channels Operating temperature range of -10°C to 50°C Built to withstand mechanical shocks and vibrations PRESET function A memory capacity of 14bit × 1 M words/ch (1 word = 2 bytes)

The Hioki MR8870-20 Data Recorder is a versatile, compact oscilloscope-like device designed for high-speed waveform recording and long-term RMS data capture. It features isolated inputs for safe measurement of power lines, and its real-time data-saving functionality ensures continuous monitoring with minimal interruptions.With up to 1 MS/s sampling rate and the ability to record fluctuations in RMS data, the MR8870-20 is ideal for applications such as motor startup analysis, inverter output waveform monitoring, and CB timing measurements. Its portable design makes it easy to use on-site. Technical Details: Channels: 2 analog, 4 logic channels Max Sampling Rate: 1 MS/s (1 µs) Memory Capacity: 12 bits × 2 M-Words/channel Storage: CF card (up to 2 GB, FAT/FAT32) Display: 4.3-inch TFT color LCD Operating Temperature: 0°C to 40°C Power Supply: AC adapter (100–240 V), Battery Pack 9780 Dimensions: 176 mm (W) × 101 mm (H) × 41 mm (D) Weight: 600 g (with battery pack)

The Hioki MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)

The DT4256-20 is a general-purpose digital multimeter that offers versatile measurement capabilities, including 10A direct input for AC/DC current and voltage (True RMS), resistance, and capacitance. Additional features include continuity testing and diode testing. The multimeter is equipped with convenient functions such as automatic range selection, a filter function, a hold function for display values, auto-hold, and MAX/MIN/average value display. It also supports relative value display and includes an auto power-saving function (APS). For added flexibility, USB communication is available via an optional adapter. Using an optional current clamp, the current measuring range can be extended to 1000A. The multimeter is rated for measurement categories CAT III 1000V and CAT IV 600V, ensuring safety across various applications. Technical Details: Measurement functions: 10A AC/DC current, voltage (True RMS), resistance, capacitance, continuity, diode test Additional features: Automatic range selection, filter function, display hold, auto-hold, MAX/MIN/average value display, relative value display, auto power-saving function (APS) Communication: USB (optional adapter required) Current range extension: Up to 1000A (with optional current clamp) Safety categories: CAT III 1000V, CAT IV 600V

The DT4281 Digital Multimeter offers a versatile and reliable solution for precision electrical measurements. Equipped with a 5-digit display and advanced features, this multimeter is ideal for professionals handling a variety of applications, from basic voltage and current measurements to more complex functions such as capacitance, frequency, and data logging. Its robust safety ratings ensure secure usage in demanding environments.Technical Details: Display Count: 60,000 counts DC Voltage: 60.000 mV to 1000.0 V AC Voltage: 60.000 mV to 1000.0 V DC + AC Voltage: 6.000 V to 1000.0 V DC Current: 600.00 μA to 10.000 A AC Current: 600.00 μA to 10.000 A Resistance: 60 Ω to 600 MΩ Capacitance: 1 nF to 100 mF Frequency: 99 Hz to 500 kHz Continuity Check: Available Diode Check: Available Temperature Measurement: -40°C to 800°C

The 9704 is a versatile banana to BNC conversion adapter accessory wherever this is required. It is suitable for example for Hioki digital multimeters where current probes can be connected, or where a banana to BNC test lead conversion is required for measurement applications.Dimensions: 63W×33H×13D mmConnector configuration: 2x Banana male, 1x BNC female Distance between banana plugs: 19 mmVoltage protection category: CAT III 600VCompatible AC clamp and flexible probes: 9010-50, 9018-50, 9132-50, CT9667-01, CT9667-02, CT9667-03 Compatible Digital Multimeters: DT4252, DT4253, DT4255, DT4256, DT4261, DT4281, DT4282 Others: Connection Cable L9097