CT7642 - AC/DC Current Probe

L0220-01

L0220-01 - Extension cable

The L0220-01 extention cable is made for extending a sensor cable connected to Hioki Display Units equipped with HIOKI connector PL14. Technical details: Length: 2m Use for: CT7631, CT7636, CT7642, CT7731, CT7736, CT7742, CM7290, CM7291 Connector type: Hioki PL14

€198.00*

L0220-02

L0220-02 - Extension cable

The L0220-02 extention cable is made for extending a sensor cable connected to Hioki Display Units equipped with HIOKI connector PL14. Technical details:Length: 5m Use for: CT7631, CT7636, CT7642, CT7731, CT7736, CT7742, CM7290, CM7291 Connector type: Hioki PL14

€288.00*

L0220-03

L0220-03 - Extension cable

The L0220-03 extention cable is made for extending a sensor cable connected to Hioki Display Units equipped with HIOKI connector PL14. Technical details: Length: 10m Use for: CT7631, CT7636, CT7642, CT7731, CT7736, CT7742, CM7290, CM7291 Connector type: Hioki PL14

€318.00*

CM7290

CM7290 - Display unit for current clamps (CT7600 and CT7700 series)

The CM7290 is the display and output unit for the CT7600 and CT7700 series AC/DC current sensors, providing a stand-alone clamp-on meter for field use or enabling waveform signals to be output to a Hioki chart recorder or logger for further analysis. Power supply and signal output for CT7000 series current sensor Simultaneous dual display of measured values, frequency and output rateFour output formats to output data to logger or other devices (via display unit) Supports AC adapter, AA alkaline batteries and external power supply

€308.00*

MR8870-20

MR8870-20 - Portable data recorder

The Hioki MR8870-20 Data Recorder is a versatile, compact oscilloscope-like device designed for high-speed waveform recording and long-term RMS data capture. It features isolated inputs for safe measurement of power lines, and its real-time data-saving functionality ensures continuous monitoring with minimal interruptions.With up to 1 MS/s sampling rate and the ability to record fluctuations in RMS data, the MR8870-20 is ideal for applications such as motor startup analysis, inverter output waveform monitoring, and CB timing measurements. Its portable design makes it easy to use on-site. Technical Details: Channels: 2 analog, 4 logic channels Max Sampling Rate: 1 MS/s (1 µs) Memory Capacity: 12 bits × 2 M-Words/channel Storage: CF card (up to 2 GB, FAT/FAT32) Display: 4.3-inch TFT color LCD Operating Temperature: 0°C to 40°C Power Supply: AC adapter (100–240 V), Battery Pack 9780 Dimensions: 176 mm (W) × 101 mm (H) × 41 mm (D) Weight: 600 g (with battery pack)

€1,248.00*

MR8880 - Portable Memory Recorder, 4 Channels

MR8880-20

MR8880 - Portable Memory Recorder, 4 Channels

The MR8880 is a 4 channel portable data acquisition system (DAQ) with a maximum sampling rate of 1Msamples/s on all analog channels simultaneously. It has 4 analog direct input channels for voltages up to 600V and 8 logic channels.Technical Details: Complies CAT III 600V isolation for direct measure of 480V power line 4 complete isolated channels Operating temperature range of -10°C to 50°C Built to withstand mechanical shocks and vibrations PRESET function A memory capacity of 14bit × 1 M words/ch (1 word = 2 bytes)

€3,118.00*

MR8875

MR8875 - Portable memory recorder

The Hioki MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)

€4,758.00*

L0220-01

L0220-01 - Extension cable

The L0220-01 extention cable is made for extending a sensor cable connected to Hioki Display Units equipped with HIOKI connector PL14. Technical details: Length: 2m Use for: CT7631, CT7636, CT7642, CT7731, CT7736, CT7742, CM7290, CM7291 Connector type: Hioki PL14

€198.00*

L0220-02

L0220-02 - Extension cable

The L0220-02 extention cable is made for extending a sensor cable connected to Hioki Display Units equipped with HIOKI connector PL14. Technical details:Length: 5m Use for: CT7631, CT7636, CT7642, CT7731, CT7736, CT7742, CM7290, CM7291 Connector type: Hioki PL14

€288.00*

L0220-03

L0220-03 - Extension cable

The L0220-03 extention cable is made for extending a sensor cable connected to Hioki Display Units equipped with HIOKI connector PL14. Technical details: Length: 10m Use for: CT7631, CT7636, CT7642, CT7731, CT7736, CT7742, CM7290, CM7291 Connector type: Hioki PL14

€318.00*

CM7290

CM7290 - Display unit for current clamps (CT7600 and CT7700 series)

The CM7290 is the display and output unit for the CT7600 and CT7700 series AC/DC current sensors, providing a stand-alone clamp-on meter for field use or enabling waveform signals to be output to a Hioki chart recorder or logger for further analysis. Power supply and signal output for CT7000 series current sensor Simultaneous dual display of measured values, frequency and output rateFour output formats to output data to logger or other devices (via display unit) Supports AC adapter, AA alkaline batteries and external power supply

€308.00*

MR8870-20

MR8870-20 - Portable data recorder

The Hioki MR8870-20 Data Recorder is a versatile, compact oscilloscope-like device designed for high-speed waveform recording and long-term RMS data capture. It features isolated inputs for safe measurement of power lines, and its real-time data-saving functionality ensures continuous monitoring with minimal interruptions.With up to 1 MS/s sampling rate and the ability to record fluctuations in RMS data, the MR8870-20 is ideal for applications such as motor startup analysis, inverter output waveform monitoring, and CB timing measurements. Its portable design makes it easy to use on-site. Technical Details: Channels: 2 analog, 4 logic channels Max Sampling Rate: 1 MS/s (1 µs) Memory Capacity: 12 bits × 2 M-Words/channel Storage: CF card (up to 2 GB, FAT/FAT32) Display: 4.3-inch TFT color LCD Operating Temperature: 0°C to 40°C Power Supply: AC adapter (100–240 V), Battery Pack 9780 Dimensions: 176 mm (W) × 101 mm (H) × 41 mm (D) Weight: 600 g (with battery pack)

€1,248.00*

MR8880-20

MR8880 - Portable Memory Recorder, 4 Channels

The MR8880 is a 4 channel portable data acquisition system (DAQ) with a maximum sampling rate of 1Msamples/s on all analog channels simultaneously. It has 4 analog direct input channels for voltages up to 600V and 8 logic channels.Technical Details: Complies CAT III 600V isolation for direct measure of 480V power line 4 complete isolated channels Operating temperature range of -10°C to 50°C Built to withstand mechanical shocks and vibrations PRESET function A memory capacity of 14bit × 1 M words/ch (1 word = 2 bytes)

€3,118.00*

MR8875

MR8875 - Portable memory recorder

The Hioki MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)

€4,758.00*

L0220-01

L0220-01 - Extension cable

The L0220-01 extention cable is made for extending a sensor cable connected to Hioki Display Units equipped with HIOKI connector PL14. Technical details: Length: 2m Use for: CT7631, CT7636, CT7642, CT7731, CT7736, CT7742, CM7290, CM7291 Connector type: Hioki PL14

€198.00*

L0220-02

L0220-02 - Extension cable

The L0220-02 extention cable is made for extending a sensor cable connected to Hioki Display Units equipped with HIOKI connector PL14. Technical details:Length: 5m Use for: CT7631, CT7636, CT7642, CT7731, CT7736, CT7742, CM7290, CM7291 Connector type: Hioki PL14

€288.00*

L0220-03

L0220-03 - Extension cable

The L0220-03 extention cable is made for extending a sensor cable connected to Hioki Display Units equipped with HIOKI connector PL14. Technical details: Length: 10m Use for: CT7631, CT7636, CT7642, CT7731, CT7736, CT7742, CM7290, CM7291 Connector type: Hioki PL14

€318.00*

CM7290

CM7290 - Display unit for current clamps (CT7600 and CT7700 series)

The CM7290 is the display and output unit for the CT7600 and CT7700 series AC/DC current sensors, providing a stand-alone clamp-on meter for field use or enabling waveform signals to be output to a Hioki chart recorder or logger for further analysis. Power supply and signal output for CT7000 series current sensor Simultaneous dual display of measured values, frequency and output rateFour output formats to output data to logger or other devices (via display unit) Supports AC adapter, AA alkaline batteries and external power supply

€308.00*

MR8870-20

MR8870-20 - Portable data recorder

The Hioki MR8870-20 Data Recorder is a versatile, compact oscilloscope-like device designed for high-speed waveform recording and long-term RMS data capture. It features isolated inputs for safe measurement of power lines, and its real-time data-saving functionality ensures continuous monitoring with minimal interruptions.With up to 1 MS/s sampling rate and the ability to record fluctuations in RMS data, the MR8870-20 is ideal for applications such as motor startup analysis, inverter output waveform monitoring, and CB timing measurements. Its portable design makes it easy to use on-site. Technical Details: Channels: 2 analog, 4 logic channels Max Sampling Rate: 1 MS/s (1 µs) Memory Capacity: 12 bits × 2 M-Words/channel Storage: CF card (up to 2 GB, FAT/FAT32) Display: 4.3-inch TFT color LCD Operating Temperature: 0°C to 40°C Power Supply: AC adapter (100–240 V), Battery Pack 9780 Dimensions: 176 mm (W) × 101 mm (H) × 41 mm (D) Weight: 600 g (with battery pack)

€1,248.00*

MR8880-20

MR8880 - Portable Memory Recorder, 4 Channels

The MR8880 is a 4 channel portable data acquisition system (DAQ) with a maximum sampling rate of 1Msamples/s on all analog channels simultaneously. It has 4 analog direct input channels for voltages up to 600V and 8 logic channels.Technical Details: Complies CAT III 600V isolation for direct measure of 480V power line 4 complete isolated channels Operating temperature range of -10°C to 50°C Built to withstand mechanical shocks and vibrations PRESET function A memory capacity of 14bit × 1 M words/ch (1 word = 2 bytes)

€3,118.00*

MR8875

MR8875 - Portable memory recorder

The Hioki MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)

€4,758.00*