CM7290 - Display unit for current clamps (CT7600 and CT7700 series)

€328.00

Content: 1 Each

In stock in Germany

€328.00

CM7290 - Display unit for current clamps (CT7600 and CT7700 series)

Product number: CM7290

Available stock: 1

GTIN/EAN: 4536036004393

Length: 233 mm

Width: 52 mm

Height: 37 mm

Weight: 0.22 kg

Product information CM7290 - Display unit for current clamps (CT7600 and CT7700 series)

The CM7290 is the display and output unit for the CT7600 and CT7700 series AC/DC current sensors, providing a stand-alone clamp-on meter for field use or enabling waveform signals to be output to a Hioki chart recorder or logger for further analysis.

Power supply and signal output for CT7000 series current sensor
Simultaneous dual display of measured values, frequency and output rate
Four output formats to output data to logger or other devices (via display unit)
Supports AC adapter, AA alkaline batteries and external power supply

Related products

CT7636

HIOKI CT7636 - AC/DC CURRENT SENSOR

AC/DC current sensor, DC up to 10kHz (-3dB), 600A AC/DC, +/-1.8% phase accuracy, 33 mm core diameter, 2.5m cable length, PL14 connection

€350.40 €438.00

View product

L9095

L9095 - Output cable for CM7290

The L9095 is a versatile output cable for connecting Hioki products with 3.5mm phone jacks to Hioki products with BNC terminal. Technical Data: Length: 1.5 m Connectors: two pole phone jack (3.5 mm), BNC male Compatible Hioki products: Loggers with BNC terminals, Devices with 3.5 mm phone connector output (CM7290, CM7291, FT3424, FT3425)

€68.00

View product

CT7642

CT7642 - AC/DC Current Probe

The Hioki CT7642 is a high-capacity AC/DC current sensor capable of measuring currents up to 2000 A. It operates over a wide frequency range from DC to 10 kHz, making it ideal for power electronics and waveform analysis. With a large conductor diameter of 55 mm, it is designed for industrial applications requiring precise, high-current measurements.The sensor provides high accuracy of ±1.5% for DC measurements and maintains performance across varied environmental conditions. Compatible with Hioki's Memory Recorders and data loggers, the CT7642 ensures reliable data acquisition for long-term monitoring.Technical Information:Measurement range: 2000 A AC/DC Frequency range: DC to 10 kHz Maximum conductor diameter: 55 mm Accuracy: ±1.5% for DC (45 Hz to 66 Hz) Operating temperature: −25°C to 65°C Safety category: CAT III 1000 V / CAT IV 600 VOutput connector: HIOKI PL14

€438.00

View product

CT7631

CT7631 - AC/DC Current Probe

The Hioki CT7631 is a high-performance AC/DC current sensor designed for accurate measurements up to 600 A. It operates across a wide frequency range, from DC to 10 kHz, making it ideal for a variety of applications including waveform analysis and current monitoring in power electronics. With a 33 mm conductor diameter and excellent safety ratings (CAT III 1000 V / CAT IV 600 V), it ensures reliable performance in both industrial and laboratory environments. The CT7631 is compatible with Hioki’s Memory Recorders and data loggers for efficient recording and analysis. Technical Information: Measurement range: 600 A AC/DC Frequency range: DC to 10 kHz Maximum conductor diameter: 33 mm Safety Category: CAT III 1000 V / CAT IV 600 V Output connector: HIOKI PL14 Typical accuracy: ±2.0% rdg. (45 Hz to 66 Hz) Operating temperature: −25°C to 65°C Dust and water resistance: IP40

€278.40 €348.00

View product

CT7731

CT7731 - AC/DC Current Probe

The Hioki CT7731 is a versatile AC/DC current sensor designed for accurate measurements up to 100 A. With a wide frequency range from DC to 5 kHz, it is perfect for waveform analysis and real-time monitoring in various applications. The CT7731’s compact design and 33 mm conductor diameter allow for easy installation in confined spaces. It features high precision with an accuracy of ±1.0% for DC measurements and ensures reliable performance in fluctuating temperature conditions. The sensor is compatible with Hioki's Memory Memory recorder and data loggers for efficient data collection and analysis. Technical Information: Measurement range: 100 A AC/DC Frequency range: DC to 5 kHz Maximum conductor diameter: 33 mm Accuracy: ±1.0% for DC (45 Hz to 66 Hz) Operating temperature: −25°C to 65°C Safety category: CAT III 1000 V / CAT IV 600 V Output connector: HIOKI PL14

€528.00

View product

CT7742

HIOKI CT7742 - AC/DC AUTO-ZERO CURRENT SENSOR

The CT7742 is an advanced AC/DC current sensor with auto-zero functionality, providing stable and precise measurements over time by compensating for offset drift. Technical Details: Rated current: 2000 A AC/DC Frequency range: DC to 5 kHz Amplitude accuracy: ±1.5% rdg, ±0.5% f.s. Diameter of conductors: 55 mm (2.17 in.) Cable length: 2.5 m (8.2 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) CAT: IV 600 V, CAT III 1000 V Output terminal: PL14

€608.00

View product

CT7736

CT7736 - AC/DC current clamp

The Hioki CT7736 is a high-performance AC/DC current sensor capable of measuring currents up to 600 A. With a frequency range from DC to 5 kHz, it is ideal for waveform analysis and high-current applications. The sensor features a compact design with a 33 mm conductor diameter, making it easy to install in various environments.Offering high accuracy of ±2.0% for DC measurements, the CT7736 is built for stable performance in fluctuating temperatures. It is compatible with Hioki's Memory Recorders and data loggers for precise and efficient data collection. Technical Information: Measurement range: 600 A AC/DCFrequency range: DC to 5 kHz Maximum conductor diameter: 33 mm Accuracy: ±2.0% for DC (45 Hz to 66 Hz) Operating temperature: −25°C to 65°CSafety category: CAT III 1000 V / CAT IV 600 V Output connector: HIOKI PL14

€608.00

View product

9234

9234 - Printer paper for MR8880-20, 8807/08, 8420 series

The 9234 is a printerpaper for MR8880 (PRINTER UNIT MR9000 required) and 8860, 8861, 8420, 8421, 8422, 8807, 8808, 8714, 8715 memory recorders. Technical Details:Roll type A6 width 112 mm × 18 m 10 rolls/set

€118.00

View product

MR9000

MR9000 - Printer module for MR8880

The MR9000 Printer Unit is designed for use with the Hioki MR8880 Memory recorder, enabling easy printouts of measurement results. This compact and efficient printer offers precise waveform documentation directly from the connected Memory HiCorder, making it ideal for fieldwork and quick data review. The MR9000 ensures seamless integration with your HiCorder, delivering accurate and reliable outputs for all your measurement needs. Technical Information: Compatible devices: Hioki MR8880 Memory HiCorder Usable recording paper: 9234 Recording Paper Recording width: 104 mm (832-dot resolution), waveform section width 100 mmRecording speed: Max 1 cm/s Paper feed accuracy: ±3% (at 25°C, 60% RH)

€668.00

View product

Z1002

Z1002 - Power supply unit for MR8880, MR8875, PQ3198

The Z1002 is a universal power supply unit for mains voltages from 100 V to 240 V AC, 50/60 Hz, which provides 12 V DC, 5.25 A max (63 W). It is suitable for the Hioki products CT9557, MR8875, MR8880, PW3198, PQ3100 and PQ3198.Technical details: Input range: 100 V AC to 240 V AC Output: 12VDC, 5.25A, Pmax 63W Residual ripple & noise: 100mVpp DC connector: angled 5.5mm barrel plug (inner diameter 2.5mm)

€168.00

View product

L1012

HIOKI L1012 - DC Power cable for LR8450, LR810x, MR8875 and MR8880

DC Power cable, 2 m, unprocessed ends, for LR8450, LR8450-01, LR8101, LR8102, MR8875 and MR8880

€48.00

View product

9445-02

HIOKI 9445-02 - AC-Adapter

The HIOKI 9445-02 is an accessory AC adapter compatible with a wide range of Hioki products. It includes interchangeable plug heads, allowing it to adapt easily to international power outlets. Technical details: Type: Wall Mount AC plug head types: UL, CEE, BS, SAA, CCCInput range: 100VAC to 240VAC Output: 9VDC, 1.2A, Pmax 10.8WRipple & noise: 100mVpp DC connector: angled EIAJ-3 plug O.D. 4.75mm, I.D. 1.7mmPossible products: 283, 3284, 3285, 3290, 3290-10, 3540, 3664, FT3470-51, FT3470-52, SS7012

€108.00

View product

CT7131

HIOKI CT7131 - AC Current Probe

The CT7131 AC Current Sensor is a versatile tool designed for accurate AC current measurements in various industrial applications. With a measurement range of up to 100 A, it provides reliable and precise performance for power analysis and current monitoring. Its compact design ensures easy handling and integration with Hioki measuring instruments, making it ideal for professionals seeking dependable measurement solutions. Technical Specifications: Measurement Range: 100 A ACFrequency Range: 40 Hz to 5 kHz Basic Accuracy: ±0.3% rdg.±0.02% f.s. Maximum Conductor Diameter: 15 mm Operating Temperature: -10°C to 50°C Cable Length: 2.5 mSafety Category: 300 V CAT III Output Connector Type: Hioki PL14 connector

€268.00

View product

LR8513

HIOKI LR8513 - 2-channel Bluetooth logger for current sensors

Compact 2-channel data logger, AC current logging with BNC current sensors, Bluetooth, max. 500 000 data points/channel, AC, DC or battery operation

€488.00

View product

MR8901

HIOKI MR8901 - 4-channel voltage module for MR8875, 500 kS/s,150 VDC

The MR8901 Analog Unit is a 4-channel voltage input module for the memory recorder MR8875. It enables voltage measurement with simultaneous sampling across all channels. The module provides four isolated BNC input connectors with an input resistance of 1 MΩ and an input capacitance of 10 pF. It supports measurement ranges from 5 mV to 10 V/div with 11 selectable ranges. Simultaneous sampling at up to 500 kS/s across all channels allows acquisition of transient and dynamic signals. The frequency characteristics extend from DC to 100 kHz (–3 dB). The maximum allowable input voltage is 150 V DC, and the maximum rated voltage to earth is 100 V AC/DC.Typical applications include transient analysis, switching waveform recording, dynamic signal measurement, and multi-channel signal acquisition in laboratory and industrial environments. Technical specificationsNumber of channels: 4 (voltage measurement) Input connectors: Isolated BNC, 1 MΩ, 10 pFMeasurement range: 5 mV to 10 V/div (11 ranges) Sampling rate: 500 kS/s (simultaneous across all channels) Frequency characteristics: DC to 100 kHz (–3 dB)Maximum input voltage: 150 V DCMaximum rated voltage to earth: 100 V AC/DCLow-pass filter: 5 / 50 / 500 Hz, 5 kHz, OFF Input coupling: DC, GND Accuracy: ±0.5 % of full scale

€1,558.00

View product

Z1000

Z1000 - Battery pack for MR8880 and LR8400 series

The Z1000 Battery pack is a NiMH type recharchable battery for the MR8880, LR8400 series products. It charges when installed in the main unit. Product details: Rating: 7.2V, 4500mAh Weight: 0.37 kg

€308.00

View product

CT7046

HIOKI CT7046 - AC FLEXIBLE CURRENT SENSOR

CT7046 - AC Flexible Current Sensor The CT7046 AC Flexible Current Sensor is designed for high-current measurements with a larger diameter to accommodate broader conductors. It provides reliable performance over a wide frequency range. Technical Details: Rated current: 6000 A AC Frequency range: 10 Hz to 50 kHz Amplitude accuracy: ±1.5% rdg, ±0.25% f.s. Diameter of conductors: 254 mm (10.00 in.) Cable length: 2.3 m, 0.2 m³ (7.55 ft., 0.66 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) CAT: IV 600 V, III 1000 V Output terminal: PL14

€438.00

View product

MR8875

HIOKI MR8875 - Portable, modular memory recorder, 500 kS/s, 16 isolated ch., 1000 V direct input, touchscreen

The HIOKI MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)

€4,998.00

View product

MR8904

HIOKI MR8904 - 2-port CAN module for MR8875

The MR8904 CAN Unit is a 2-port CAN interface module for the memory recorder MR8875. It enables acquisition and output of CAN communication signals. The module supports CAN communication according to ISO 11898 and SAE J2411 standards. Each port can be configured for high-speed CAN, low-speed CAN, or single-wire CAN. CAN messages can be received and transmitted, and acknowledgment settings can be configured. Received CAN signals can be converted into analog or logic channels for recording. Up to 15 analog channels (16-bit equivalent) and 16 logic channels can be output. Signal mapping depends on bit length.The module provides ID-trigger functionality and outputs a pulse signal when a specified CAN ID is received. Response time is within 200 μs after message reception.Typical applications include CAN bus monitoring, signal analysis, and synchronized recording of communication data in laboratory and industrial environments. Technical specifications CAN ports: 2 (D-sub, 9-pin)Standards: ISO 11898 (CAN 2.0b), ISO 11898-1/-2/-3, SAE J2411 Interface: High-speed CAN, low-speed CAN, single-wire CAN (per port selectable)Baud rate: 50 kbps to 1 Mbps (high-speed), 10 kbps to 125 kbps (low-speed), 10 kbps to 83.3 kbps (single-wire) Signal output: up to 15 analog channels (16-bit equivalent), 16 logic channels Signal mapping: 1 to 32-bit signals (channel allocation depending on bit width)ID trigger: pulse output on logic channelResponse time: ≤200 μsTerminator: 120 Ω ±10 %, switchableACK control: ON/OFF

€2,388.00

View product

MR8902

HIOKI MR8902 - 15-channel voltage/temp. module for MR8875, 10 ms

The MR8902 Voltage/Temp Unit is a 15-channel voltage and thermocouple input module for the MR8875 memory recorder, designed for stable multi-point DC voltage and temperature acquisition in demanding industrial environments.Each of the 15 channels can be individually configured for voltage or thermocouple measurement. With 16-bit A/D conversion and ranges from 500 µV/div up to 5 V/div, the module enables precise low-level signal acquisition across a wide measurement span. Simultaneous channel scanning supports synchronized multi-point monitoring at update rates down to 10 ms. The unit supports thermocouple types K, J, E, T, N, R, S, B and W, with selectable internal or external reference junction compensation. Internal compensation accuracy is ±0.5°C (added to measurement accuracy). Thermocouple broken-wire detection is integrated and switchable. High noise immunity supports reliable operation in electrically demanding environments, with a normal mode rejection ratio of ≥50 dB and a common mode rejection ratio up to 140 dB (with digital filter). Selectable 50 Hz or 60 Hz digital filtering enhances measurement stability under industrial mains conditions. Typical applications include multi-channel temperature profiling, environmental and thermal validation testing, industrial DC signal monitoring, and long-term trend recording in laboratory and field environments. Technical specificationsChannels: 15 (voltage / thermocouple) Measurement: Voltage, temperature (thermocouple); types K, J, E, T, N, R, S, B, WRe5-26Range / resolution: 500 µV to 5 V/div, 16-bit A/DInput: Push terminal, 1 MΩUpdate rate: 10 ms, 20 ms, 500 ms, 2 s Filter: Digital filter 50 Hz, 60 Hz, OFF Accuracy: ±0.1 % f.s. Voltage limits: 100 V DC input, 100 V AC/DC to earth

€1,738.00

View product

CT7045

CT7045 - AC flexible current sensor

AC flexible Current Sensor, 10 Hz to 50 kHz (+/-3dB), 6000A AC, 180 mm diameter, PL14 terminal

€408.00

View product

CT7116

HIOKI CT7116 - AC LEAKAGE CURRENT SENSOR

The CT7116 is designed for precise leakage current measurements with high accuracy. It supports BNC conversion for versatile applications. Technical Details: Rated current: 6 A AC Frequency range: 40 Hz to 5 kHz Amplitude accuracy: ±1.0% rdg, ±0.05% f.s. Diameter of conductors: 40 mm (1.57 in.) Cable length: 2.5 m (8.20 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) Output terminal: PL14

€358.00

View product

MR8905

HIOKI MR8905 - 2-channel voltage module for MR8875, 500 kS/s, 1000 VDC

The MR8905 Analog Unit is a 2-channel voltage input module for the memory recorder MR8875. It enables voltage measurement of instantaneous values and AC RMS values. Each channel supports measurement ranges from 500 mV to 50 V/div. The module uses 16-bit A/D conversion and supports simultaneous sampling across both channels at up to 500 kS/s. The frequency characteristics extend from DC to 100 kHz (–3 dB).The module supports RMS measurement with defined accuracy and response time. Input coupling modes DC, AC-RMS, and GND are selectable. The maximum allowable input voltage is 1000 V DC or 700 V AC. The maximum rated voltage to earth is CAT II 1000 V AC/DC and CAT III 600 V AC/DC. Typical applications include voltage measurement, RMS evaluation, and waveform analysis in laboratory and industrial environments. Technical specifications Channels: 2 (voltage, instantaneous / AC RMS selectable) Input: banana connector, 4 MΩ, <1 pFMeasurement range: 500 mV to 50 V/divAccuracy: ±0.5 % f.s. (instantaneous), ±1.5 % / ±3 % f.s. (RMS, frequency-dependent) Sampling / resolution: 500 kS/s simultaneous, 16-bit (1/1250) Frequency characteristics: DC to 100 kHz (–3 dB) Low-pass filter: 5, 50, 500 Hz, 5 kHz, OFF Input coupling: DC, AC-RMS, GNDMaximum input: 1000 V DC, 700 V AC Maximum rated voltage to earth: CAT II 1000 V AC/DC, CAT III 600 V AC/DC

€1,558.00

View product

U8332

HIOKI U8332 - SSD Unit for MR6000, 256 GB, factory option

SSD Unit for MR6000, 256 GB, factory option, allows real-time recording at maximum 20 MS/s

CT7126

CT7126 - AC Current Probe

The CT7126 AC Current Sensor is a compact, reliable solution for accurate AC current measurement. Ideal for power measurement and analysis, the sensor is designed to meet the needs of various industrial applications. Its compact form factor allows for easy handling, while its durable construction ensures precise and consistent performance. Technical Specifications: Measurement Range: 60 A AC Frequency Range: 40 Hz to 5 kHzBasic Accuracy: ±0.3% rdg. ±0.01% f.s. Maximum Conductor Diameter: 15 mm Operating Temperature: -10°C to 50°C Cable Length: 2.5 m Safety Category: 300 V CAT III Output connector: Hioki PL14 Connector

€268.00

View product

C1004

C1004 - Carrying Case for MR8875

Durable hard-shell case with wheels and telescoping handle, precisely fitted for MR8875 and accessories.

€718.00

View product

Z5021

HIOKI Z5021 - Power supply unit for current or differential probes, factory option for MR6000

Power supply unit for up to 8 current clamps of the HIOKI CT670x/327x Series, up to 4 current clamps of the HIOKI CT671x Series, up to eight HIOKI 9322 or up to three P9000 differential probes, factory option for MR6000, 12 VDC and 0.6 A per terminal

MR8903

HIOKI MR8903 - 4-channel strain module for MR8875, 200 kS/s

The MR8903 Strain Unit is a 4-channel strain and low-voltage input module for the memory recorder MR8875. It enables strain and voltage measurement with configurable inputs for each channel.Each channel can be configured for strain gauge or low-level voltage measurement. The module uses 16-bit A/D conversion and supports simultaneous sampling across all channels at up to 200 kS/s. The frequency characteristics extend from DC to 20 kHz. The strain measurement function supports bridge sensors from 120 Ω to 1 kΩ with a bridge excitation voltage of 2 V. Measurement ranges span from 20 µε/div to 1000 µε/div. Selectable low-pass filters (5 Hz, 10 Hz, 100 Hz, 1 kHz, OFF) are available. The maximum allowable voltage between input terminals and earth is 30 V AC rms or 60 V DC. The maximum bridge input voltage is 10 V DC. Typical applications include strain measurement, vibration analysis, and multi-channel data acquisition in laboratory and industrial environments. Technical specificationsChannels: 4 (strain/voltage selectable per channel, auto-balance ±10000 με) Input: ≥1 MΩ, bridge 120 Ω to 1 kΩ, excitation 2 V ±0.05 VMeasurement ranges: 20–1000 με/div (strain), 50–1000 μV/div (voltage) Accuracy: ±0.5 % f.s. (range-dependent, incl. offset) Sampling / resolution: 200 kS/s simultaneous, 16-bit (1/1250)Frequency characteristics: DC to 20 kHz (+1/−3 dB)Low-pass filter: 5, 10, 100 Hz, 1 kHz, OFF Maximum voltage: 10 V DC input, 30 V AC rms / 60 V DC to earth

€3,568.00

View product

Z1003

Z1003 - Battery pack for MR8875, PQ3198

The Z1003 is a 7.2 V DC, 4500mAh Nickel-Metal Hydride (Ni-MH) rechargeable battery pack designed for use with Hioki devices such as the MR8875, PQ3198/PW3198, and PQ3100. It provides reliable power, ensuring extended operation in the field and in demanding environments. Technical Details: Battery Type: Ni-MH Voltage: 7.2 V DC Capacity: 4500mAh Compatible Devices: MR8875, PQ3198/PW3198, PQ3100

€178.00

View product

CT7044

HIOKI CT7044 - AC FLEXIBLE CURRENT SENSOR

The CT7044 AC Flexible Current Sensor is ideal for measuring high currents over a wide frequency range. It features a flexible design with a 100 mm diameter, making it suitable for large conductors in tight spaces. Technical Details: Rated current: 6000 A AC Frequency range: 10 Hz to 50 kHz Amplitude accuracy: ±1.5% rdg, ±0.25% f.s. Diameter of conductors: 100 mm (3.94 in.) Cable length: 2.3 m, 0.2 m³ (7.55 ft., 0.66 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) CAT: IV 600 V, III 1000 V Output terminal: PL14

€286.40 €358.00

View product

CT7136

CT7136 - AC Current Probe

The CT7136 AC Current Sensor is designed for high-accuracy current measurements up to 600 A, making it ideal for industrial applications where large currents and high precision are required. Its robust build and wide frequency range ensure reliable performance, even in demanding environments. The sensor easily integrates with Hioki measuring instruments, allowing for seamless data collection and analysis. Technical Specifications: Measurement Range: 600 A ACFrequency Range: 40 Hz to 5 kHz Accuracy / Amplitude Accuracy: ±0.3% rdg. ±0.01% f.s. Maximum Conductor Diameter: 46 mm Operating Temperature: -10°C to 50°C Cable Length: 2.5 m Safety Category: 1000 V CAT III, 600 V CAT IV Output Connector Type: Hioki PL14 connector

€298.00

View product

MR6000

HIOKI MR6000 - Modular 32-channel memory recorder, 200 MS/s, 1000 V direct input, touchscreen

Modular memory recorder, up to 32 channels, max. sampling rate 200 MS/s, max 1000 VDC isolated direct voltage input, up to 1 TB storage with SSD option, intuitive user interface, touchscreen, real-time waveform calculation and real-time saving

L9094

L9094 - Output cable for 3283

The L9094 is a versatile output cable for connecting Hioki products with 3.5mm phone jacks to transmit analogue information to devices with banana jacks as inputs. Technical data: Length: 1.5 m Connectors: two pole phone jack (3.5 mm), banana plug 4 mm Compatible Hioki products: 3283, 3284, 3285, 3664, FT3406, FT3424, FT3425

€48.00

View product

L9096

L9096 - accessory cable

The L9096 is an accessory cable for Hioki products such as FT3424, FT3425, CM7290, CM7291 to connect these devices to Hioki data recorder terminal blocks. Technical details: Length: 1.5m Connector: Ø3.5mm Wire ends: plain black/red sleeving

€28.00

View product

Z5004

Z5004 - Magnetic Strap

The HIOKI Z5004 is a magnetic holding strap designed for use with LR85xx/LR5000 series data loggers, the PD3259 phase detector and similar products, as well as DT42xx series digital multimeters.

€48.00

View product

The right purchasing route for your HIOKI products

Whether you order directly from HIOKI or purchase through a local partner: many companies rely on existing suppliers, approved vendors or regional procurement processes. Our authorized HIOKI partners can support local quotation, ordering and purchasing processes.

Find a HIOKI partner near you Any questions?

👤

Partners in your region

Authorized HIOKI partners can support local purchasing in your region.

💬

Fits your purchasing process

Ideal for companies that order through approved vendors or existing suppliers.

✓

Local handling

Quotation, ordering and communication through a contact in your region.