9322 - Differential probe
€738.00*
Content:
1 Each
In stock, delivery time: Ready for dispatch
Available stock:
1
Product details
Product number:
9322
EAN:
4536036006786
Length:
700 mm
Width:
250 mm
Height:
1500 mm
Weight:
0.58 kg
Product information "9322 - Differential probe"
The Hioki 9322 Differential Probe is a versatile 3-in-1 probe designed for the floating measurement of high-voltage waveforms, detecting power line surge noise, and providing true RMS rectified output of high-voltage AC. With the ability to handle up to 2000 V DC and 1000 V AC (CAT II), the 9322 ensures safe and accurate measurements even in demanding environments.
This probe is compatible with the Memory Memory recorder series and can be powered via an AC adapter or Hioki’s Probe Power Unit Z5021. It offers a wide frequency range for detecting high-frequency components, making it ideal for inverter circuits and power supply noise detection.
Technical details:
- Measurement functions: o DC mode: Waveform monitor output, DC to 10 MHz ±3 dB o AC mode: Detection of power line surge noise, 1 kHz to 10 MHz ±3 dB o RMS mode: Rectified RMS output of DC and AC voltages, DC, 40 Hz to 100 kHz o Response speed: 200 ms or less (400 V AC)
- Max. allowable input: 2000 V DC, 1000 V AC
- Max. rated voltage to earth: o 1000 V AC/DC (CAT II) when using the Grabber Clip L9243 o 1000 V AC/DC (CAT II), 600 V AC/DC (CAT III) when using alligator clips
- Output: Voltage division ratio 1/1000, BNC terminal (3-mode selectable: DC/AC/RMS) • DC amplitude accuracy: ±1% f.s. (1000 V DC or less), ±3% f.s. (2000 V DC)
- RMS amplitude accuracy: ±1% f.s. (DC, 40 Hz to 1 kHz), ±4% f.s. (1 kHz to 100 kHz)
- Input resistance and capacity: o H-L: 9 MΩ, approx. 10 pF (at 100 kHz) o H-case, L-case: 4.5 MΩ, approx. 20 pF (at 100 kHz)
- Power supply: o General requirement: +5 V to +12 V, less than 300 mA (DC jack OD 5.5 mm, ID 2.1mm)
- Hioki provided power supplies: o AC Adapter 9418-15 o Z5021combined plus Power Cord 9248 o Use of Logic terminal on Memory Recorder plus Power Cord 9324 o Use of sensor terminal of F/V Unit 8940 plus Power Cord 9325 o Use of DC power output terminal attached to the input unit for the 8855 through Power Cord 9328 o Via the 8860 series Probe Power Unit 9687 plus Power Cord 9248
- Dimensions and mass: 70 mm (W) × 150 mm (H) × 25 mm (D), 350 g, Cord length: Input 46 cm, Output 1.3 m
- Differential Probe 9322
- Alligator clips (red/black set)
- Grabber Clip L9243 (red/black set)
- Carrying case C0203
- Instruction manual"
Related products
MR6000
MR6000 - 32-channel modular memory recorder, 200 MS/s, 1000V, touchscreen
Modular memory recorder, up to 32 channels, max. sampling rate 200 MS/s, max 1000 VDC isolated direct voltage input, up to 256 GB storage with SSD option, intuitive user interface, touchscreen, real-time waveform calculation and real-time saving
MR8870-20
MR8870-20 - Portable data recorder
The Hioki MR8870-20 Data Recorder is a versatile, compact oscilloscope-like device designed for high-speed waveform recording and long-term RMS data capture. It features isolated inputs for safe measurement of power lines, and its real-time data-saving functionality ensures continuous monitoring with minimal interruptions.With up to 1 MS/s sampling rate and the ability to record fluctuations in RMS data, the MR8870-20 is ideal for applications such as motor startup analysis, inverter output waveform monitoring, and CB timing measurements. Its portable design makes it easy to use on-site. Technical Details: Channels: 2 analog, 4 logic channels Max Sampling Rate: 1 MS/s (1 µs) Memory Capacity: 12 bits × 2 M-Words/channel Storage: CF card (up to 2 GB, FAT/FAT32) Display: 4.3-inch TFT color LCD Operating Temperature: 0°C to 40°C Power Supply: AC adapter (100–240 V), Battery Pack 9780 Dimensions: 176 mm (W) × 101 mm (H) × 41 mm (D) Weight: 600 g (with battery pack)
MR8875
MR8875 - Portable memory recorder
The Hioki MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)
MR8880-20
MR8880 - Portable Memory Recorder, 4 Channels
The MR8880 is a 4 channel portable data acquisition system (DAQ) with a maximum sampling rate of 1Msamples/s on all analog channels simultaneously.
It has 4 analog direct input channels for voltages up to 600V and 8 logic channels.Technical Details: Complies CAT III 600V isolation for direct measure of 480V power line 4 complete isolated channels Operating temperature range of -10°C to 50°C Built to withstand mechanical shocks and vibrations PRESET function A memory capacity of 14bit × 1 M words/ch (1 word = 2 bytes)
Z5021
Z5021 - Power supply unit for current or differential probes, factory option for MR6000
Power supply unit for up to 8 current clamps of the CT670x/327x Series, up to 4 current clamps of the CT671x Series, up to eight 9322 or up to three P9000 differential probes, factory option for MR6000, 12 VDC and 0.6 A per terminal
9418-15
9418-15 - Power supply unit with SchuKo power cable
9418-15 is an accessory AC Adapter for a wide range of Hioki Products. Technical Details: AC Inlet:IEC-60320-C14 Input range: 100VAC to 240VAC Output: 12VDC, 2.5A, Pmax 30W Ripple & Noise: 120mVpp DC plug: angled hollow plug O.D. 5.5mm, I.D. 2.1mm Possible Products: 3197, 3334-10, 3351, 8420, 8421, 8422, 8423, 8714, 8715, 8807, 8808, 8910, 9322, 9643, 3455, IR3455, IR3455-30, LR8400, LR8401, LR8402, PR8111, PR8112, TM6101
C0203
C0203 - CARRYING CASE
The C0203 carrying case is suitable for the HIOKI 9322 Differential Probe, HIOKI CM4370 Clamp Meter Series, and similar products. It offers durable and secure storage, making it ideal for field work and transport. Technical Details: C0203 Carrying Case: Suitable for HIOKI 9322 Differential Probe, CM4370 Clamp Meter Series, and similar products
L9243
L9243 GRABBER CLIP
The L9243 Grabber Clip is a sturdy accessory that attaches to the tip of banana plug cables, enabling secure voltage measurements. Supplied as a red and black set, it is ideal for use with Hioki differential probes. Additionally, the L9243 is compatible with various voltage and connection cords, making it a versatile accessory for different measurement needs. Technical Details: Connector: banana 4mm Length: 185 mm (7.28 in) Voltage: CAT II 1000 V Current: 1 A Color: Red/Black set Compatibility:
o Banana plug cables: L1000, L4930, L4940
o Connection cords: L9197, L9438-50
o Differential probes: 9322, P9000