HIOKI MR8791 - Pulse Generator Unit
Description
Product information HIOKI MR8791 - Pulse Generator Unit
The MR8791 Pulse Generator Unit is an 8-channel pulse signal generation module for the memory recorders MR6000, MR6000-01, MR8740T, MR8740, MR8741, MR8827, MR8847A and MR8848. It generates configurable pulse signals for testing digital control systems and switching applications.
The unit enables adjustable pulse widths, repetition rates and output voltage levels for evaluating trigger circuits, timing behavior and switching responses. Synchronized operation with recorder acquisition channels allows detailed analysis of system reactions to defined pulse stimuli.
Typical applications include trigger verification, PWM simulation, digital interface testing and timing analysis in embedded and power electronic systems.
Technical Specifications
- Number of channels: 8 (D-sub half-pitch 50-pin connector)
- Maximum rated voltage to ground: 30 V rms AC / 60 V DC
- Output modes: pattern output, pulse output, logic output, open collector output
- Pattern output: read frequency 10 Hz to 120 kHz, up to 2048 logic patterns
- Pulse output: frequency 0.1 Hz to 20 kHz, duty cycle 0.1 % to 99.9 %
- Logic output level: 0 V to 5 V (H ≥ 3.8 V, L ≤ 0.8 V)
- Open collector output: max. collector-emitter voltage 50 V, overcurrent protection 100 mA
Compatible memory recorders
- MR6000
- MR6000-01
- MR8740T
- MR8740
- MR8741
- MR8827
- MR8847A
- MR8848
What's in the Box
- MR8791 Pulse Generator Unit
Dimensions & Packaging
| Length | 196.5 mm |
|---|---|
| Width | 106 mm |
| Height | 19.8 mm |
-
Product Brochure with Data Sheet, Memory Recorder MR6000 (English)11,496 KB pdf
-
Product brochure with data sheet, Modular Memory Recorder MR8848 (English)5,154 KB pdf
-
Instruction Manual, Modules for Memory Recorders (Japanese, English)2,514 KB pdf
-
Product brochure with datasheet, Memory Recorder MR8740T (English)7,706 KB pdf
-
Instruction Manual, Arbitrary-, Waveform-, Pulse Generator Units U8793, MR8790, MR8791 (English)15,179 KB pdf
Skip product gallery
Related Products
MR6000
HIOKI MR6000 - Modular 32-channel memory recorder, 200 MS/s, 1000 V direct input, touchscreen
Modular memory recorder, up to 32 channels, max. sampling rate 200 MS/s, max 1000 VDC isolated direct voltage input, up to 1 TB storage with SSD option, intuitive user interface, touchscreen, real-time waveform calculation and real-time saving
MR8848
HIOKI MR8848 - Modular 32-channel memory recorder, 20 MS/s, 1000 V direct input, rugged design
Modular memory recorder, up to 32 analog and 16 logic channels, max. sampling rate 20 MS/s, max 1000 VDC isolated direct voltage input, 1 TB storage with SSD option, optional real-time saving, rugged design, AC or DC power supply
U8793
HIOKI U8793 - Arbitrary Waveform Generator Unit
The U8793 Arbitrary Waveform Generator Unit is a 2-channel signal generation module for the memory recorders MR6000, MR6000-01, MR8848, MR8827, MR8740, MR8741 and MR8740T. It supports both function generator and arbitrary waveform generator operation for outputting defined and user-defined waveforms. The unit generates DC, sine, square, pulse, triangular and ramp waveforms in a frequency range from 10 mHz to 100 kHz. In arbitrary mode, waveforms are output from measured data or external sources. Supported formats include CSV, TXT, WFG and TFG files, as well as data from Hioki instruments and the SF8000 Waveform Maker software. Signal output uses a 16-bit D/A converter with a refresh rate of 2 MHz. The output voltage ranges from −10 V to +15 V with an amplitude setting from 0 to 20 Vp-p and a resolution of 1 mV. The maximum output current is 10 mA with a minimum load of 1.5 kΩ. Sweep functions for frequency, amplitude, offset and duty (pulse only) are supported. A program function with up to 128 steps and loop function is available. The unit also provides a self-test function and external input/output control. Typical applications
Typical applications include reproduction of recorded waveforms and their output for testing purposes. This includes playback of signal patterns such as voltage dips, interruptions and fluctuations based on real measurement data. Technical specifications Number of channels: 2; Output terminal: SMB (≤ 1 Ω)
Output voltage: −10 V to +15 V; Amplitude: 0 to 20 Vp-p; Resolution: 1 mV Max. output current: 10 mA (Load ≥ 1.5 kΩ); Max. rated voltage to ground: 30 V AC / 60 V DC Waveforms: DC, sine, square, pulse, triangular, ramp; Frequency range: 10 mHz to 100 kHz Arbitrary mode: CSV, TXT, WFG, TFG, measured data, SF8000 D/A converter: 16 bit; Refresh rate: 2 MHz Sweep: frequency, amplitude, offset, duty (pulse); Program: max. 128 steps, loop (∞) Additional functions: self-test; external input/output control Compatible memory recorders
MR6000, MR6000-01, MR8848, MR8827, MR8740, MR8741, MR8740T
MR8790
HIOKI MR8790 - Waveform Generator Unit
The MR8790 Waveform Generator Unit is a 4-channel signal generation module for the memory recorders MR6000, MR6000-01, MR8740T, MR8740, MR8741, MR8827, MR8847A and MR8848. It generates DC and sine wave signals that can be used as stimulus signals in measurement and test systems. The module supports synchronized signal output alongside multi-channel acquisition, allowing correlation of generated signals with measured voltage, current or logic signals. Adjustable amplitude and frequency parameters enable flexible signal generation for development, validation and functional testing tasks.Typical applications include component testing, validation of analog input stages and evaluation of dynamic system behavior.Technical Specifications Number of channels: 4 (SMB output terminals) Output impedance: ≤1 Ω Max. rated voltage to ground: 30 V rms AC or 60 V DC Output voltage range: −10 V to +10 V (0 to 20 Vp-p, resolution 1 mV) Max. output current: 5 mA Output function: DC, sine wave (1 Hz to 20 kHz) Accuracy: amplitude ±0.25 % of setting ±2 mV p-p (1 Hz to 10 kHz); offset ±3 mV; DC output ±0.6 mV Compatible memory recordersMR6000 MR6000-01MR8740TMR8740MR8741MR8827MR8847AMR8848
Questions about this HIOKI product?
Reviewing a HIOKI product for your application? Our HIOKI team can help with technical questions, suitable accessories and the next steps. For local quotation and order handling in your language, you can also find an authorized HIOKI partner in your region.
