HIOKI IM7583 - High-Frequency Impedance Analyzer, 1 MHz to 600 MHz
Impedance analyzer for measurements from 1 MHz to 600 MHz with basic accuracy ±0.65%
Z and ±0.38° phase, repeatability ±0.07%, typical measurement time 0.5 ms, comparator and
BIN functions, USB, LAN and EXT I/O, optional RS-232C or GP-IB
Product number:
IM7583-01
EAN:
4536036004775
Length:
215 mm
Width:
348 mm
Height:
200 mm
Weight:
8 kg
Product information HIOKI IM7583 - High-Frequency Impedance Analyzer, 1 MHz to 600 MHz
Key Specifications
- Measurement frequency: 1 MHz to 600 MHz
- Typical analog measurement time: 0.5 ms
- Basic accuracy: ±0.65% (Z, reading), ±0.38°(Phase)
- Typical repeatability: ±0.07% (e.g., 1 nH at 3 GHz)
- Test signal levels: −40.0 dBm to +1.0 dBm
Typical Applications
- Characterization of HF components such as chip inductors, ferrite beads, filters and resonators
- Frequency-dependent impedance analysis for component evaluation and circuit design
- Resonance and peak evaluation of HF components across frequency sweeps
- Comparator- and BIN-based pass/fail testing of high-frequency components in R&D and production-related environments
Models in comparison
| Model | Measurement frequency | Test signal levels |
|---|---|---|
| IM7587 | 1 MHz bis 3 GHz | −40,0 dBm bis +1,0 dBm |
| IM7585 | 1 MHz bis 1,3 GHz | −40,0 dBm bis +1,0 dBm |
| IM7583 | 1 MHz bis 600 MHz | −40,0 dBm bis +1,0 dBm |
| IM7581 | 100 kHz bis 300 MHz | −40,0 dBm bis +7,0 dBm |
Detailed Product Overview
Analysis of HF components in a wide range of electronic applications regularly requires impedance measurements up to several hundreds of megahertz. With a frequency range from 1 MHz to 600 MHz, the IM7583 supports characterization of components such as chip inductors, ferrite beads, filters and resonators in HF circuit design.Measurement Performance and Analysis Functions
High measurement accuracy of ±0.65% for impedance and ±0.38° for phase ensures reliable impedance evaluation across the specified frequency range. A typical repeatability of approximately ±0.07% provides reproducible results under defined measurement conditions. Fast frequency sweeps are supported by a typical measurement time of 0.5 ms, while test signal levels from −40.0 dBm to +1.0 dBm allow controlled excitation of the device under test.The analyzer supports LCR, sweep and continuous measurement modes and provides
evaluation functions such as comparator and BIN judgment, as well as area, peak and spot
analysis. All measurement settings and analysis functions are accessed directly via the
integrated 8.4 inch color touchscreen. Standard interfaces include USB, LAN and EXT I/O,
with optional RS-232C and GP-IB.
For extended analysis, the IM7583 provides an equivalent circuit analysis function with
multiple representative circuit models and automatic model selection based on measured
data. The available models support impedance-based evaluation of HF components and
enable systematic characterization across frequency sweeps.
Test Head and Fixtures
The IM7583 employs a compact, palm-sized test head connected to the main unit via a specified connection cable. It is available with 1 m or 2 m cable lengths, allowing users to balance measurement accuracy and installation flexibility. Placing the test head close to the device under test minimizes signal path length and reduces parasitic inductance and capacitance that would otherwise affect high-frequency impedance measurements. This design supports stable and reproducible results while reducing bench space requirements in laboratory environments.For measurements of components with different package types, the IM7583 is typically used
in combination with the IM9202 test fixture. The IM9202 supports impedance measurements
up to 600 MHz and is designed for both surface-mount and leaded components, providing a
stable two-terminal contact interface. Defined contact geometry ensures reproducible
placement of the device under test and reliable electrical contact, reducing measurement
variation and enabling accurate characterization of HF components.
For dedicated SMD measurements, the IM7583 can also be used with the IM9201 SMD test
fixture. For stable mounting, the selected test fixture is mounted on the IM9200 stand, which
provides a secure base and a defined mechanical connection between the test head and the
fixture and includes a magnifier to facilitate handling of small components. The IM9906
adapter is required to connect the 7 mm interface of the test fixture to the analyzer test
head’s 3.5 mm connector.
Calibration and Measurement Integrity
The optional IM9905 calibration kit provides open, short and load reference standards for correction of system-related measurement errors. By compensating for parasitic effects introduced by fixtures and the test head, the kit supports stable measurement accuracy over time. Connection of the calibration standards is performed via the same IM9906 adapter used for the test fixture.The optional IM9905 calibration kit supplies OPEN, SHORT and LOAD reference standards
for reducing system-related measurement deviations in high-frequency impedance
measurements up to 3 GHz. Calibration is applied to the measurement path up to the defined reference plane, covering the analyzer test head and the associated connection interfaces.
The calibration standards are connected using the IM9906 adapter, which is also used for
test fixtures
- IM7583 Impedance Analyzer
- Test head
- Connection cable
- Power cord
- Instruction manual
- Impedance analyzer application software (communications manual)
-
Product catalog with datasheet, IMPEDANCE ANALYZER IM7580 Series (English)5,607 KB pdf
-
Product brochure with datasheet, SMD TEST FIXTURE IM9201, IM9202 (English)2,428 KB pdf
-
Instruction Manual, Impedance Analyzer IM7580A, IM7581, IM7583, IM7585, IM7587 (English)20,883 KB pdf
-
Instruction Manual, Impedance Analyzer IM7580A, IM7581, IM7583, IM7585 (German)11,377 KB pdf
-
Bedienungsanleitung, Impedance Analyzer IM7580A, IM7581, IM7583, IM7585 (French)11,347 KB pdf
Related products
IM9202
IM9202 - Test Fixture for Impedance Measurements, DC to 600 MHz
Test fixture for impedance measurements of leaded and SMD components up to 600 MHz,
two-terminal measurement, 7 mm interface
IM9201
IM9201 - SMD Test Fixture for Impedance Measurements, DC to 3 GHz
SMD test fixture for impedance measurements from EIA0201 to EIA1210, six supported
SMD sizes, two-terminal measurement, 7 mm interface
IM9200
IM9200 - Stand for IM9201 and IM9202 impedance test fixtures
Stand for IM9201 and IM9202 impedance test fixtures, with removable magnifier
IM9905
IM9905 - APC-7 Calibration Standards for Impedance Analyzers
Calibration kit with OPEN, SHORT and LOAD standards for 7 mm (APC-7) reference plane
IM9906
IM9906 - 7 mm (APC-7) to 3.5 mm Adapter
Adapter for connecting 7 mm (APC-7) accessories to 3.5 mm measurement interfaces
IM7587-01
HIOKI IM7587 - High-Frequency Impedance Analyzer, 1 MHz to 3 GHz
Impedance analyzer for measurements from 1 MHz to 3 GHz with basic accuracy ±0.65% Z
and ±0.38° phase, repeatability ±0.07%, typical measurement time 0.5 ms, comparator and
BIN functions, USB, LAN and EXT I/O, optional RS-232C or GP-IB
IM7581-01
HIOKI IM7581 - Impedance Analyzer for HF Components, 100 kHz to 300 MHz
Impedance analyzer for measurements from 100 kHz to 300 MHz with basic accuracy
±0.72% Z and ±0.41° phase, repeatability ±0.07%, typical measurement time 0.5 ms,
comparator and BIN functions, USB, LAN and EXT I/O, optional RS-232C or GP-IB
IM3570
HIOKI IM3570 - Impedance Analyzer, 4 Hz to 5 MHz
Impedance analyzer and LCR meter in one instrument, 4 Hz to 5 MHz, 0.5 ms measurement
speed, basic accuracy Z: ±0.08%, θ: ±0.05°, guaranteed accuracy from 1 mΩ, comparator
and BIN function, interfaces: USB, LAN, RS-232C, GP-IB, handler I/O
Z3000
Z3000 - GPIB Interface
Optional GPIB interface card for installation in the IM3523, IM3533, IM3533-01, IM3590, IM7580A, IM7581, IM7583, IM7585, IM7587 impedance meters.
Z3001
Z3001 - RS-232C Interface for IM3590
Optional HIOKI RS-232C interface card for installation in the HIOKI impedance measuring instruments IM3523, IM3533, IM3533-01, IM3590, IM7580A, IM7581, IM7583, IM7585, and IM7587.
20
%
9151-02
9151-02 - GP-IB CONNECTOR CABLE
The GPIB connector cable is a 2-meter long cable designed for use with all Hioki products that are equipped with a GPIB interface. This cable ensures reliable connectivity and data transfer for your test and measurement equipment. Technical Details: Cable type: GPIB connector cable Length: 2 meters Compatible devices: All Hioki products with GPIB interface
9637
9637 - RS232 Crossover-Kabel
The 9637 is a RS-232c cross type cable for two-way communication between PC or other controlling device and a Hioki Product equipped with RS232c interface as feature or option. Technical Details: Connectors: 9pin female (both ends) Cable Type: Cross Length: 1.8m