PQ3198-94 - Power quality analyzer kit with 4 flexible current clamps
The Hioki PQ3198-94 Kit is a complete solution for monitoring and analyzing power quality. Equipped with all essential accessories, it enables professionals to perform high current measurements up to 6000 A in demanding electrical systems.
.jpg "PQ3198-94 - Power quality analyzer kit with 4 flexible current clamps")
.jpg "PQ3198-94 - Power quality analyzer kit with 4 flexible current clamps")
.jpg "PQ3198-94 - Power quality analyzer kit with 4 flexible current clamps")
Description
Product information PQ3198-94 - Power quality analyzer kit with 4 flexible current clamps
The PQ3198-94 kit is based on the PQ3198 including its standard accessories plus all necessary additional accessories that enable professionals to perform high current measurements up to 6000 A in high power electrical systems. It offers a complete solution for monitoring and analyzing power quality.
More than specs – find more details here:
The PQ3198 main unit supports both AC and DC measurements, complies with the IEC61000-4-30 Class A standard and measures voltage fluctuations, transients, harmonics and inrush currents. Ideal for applications in renewable energy systems, electric vehicle charging stations and power controllers, the analyzer with its 4 isolated voltage channels enables simultaneous measurements across multiple circuits.
Technical details PQ3198-94 Kit:
Technical details:
- Measuring channels: 4 voltage channels, 4 current channels
- Voltage measuring range: 1 V to 1000 V AC/DC, ±6000 V peak
- Current measuring range: Up to 6000 A (with suitable current sensor)
- Frequency range: DC, 0.1 Hz to 700 kHz
- Basic accuracy: Voltage ±0.1 %, current ±0.1 % (with sensor)
- Event detection: transients, voltage increases, voltage drops, interruptions, frequency fluctuations
- Standard compliance: IEC61000-4-30 Class A
- Display: 6.5-inch TFT colour display
- Power supply: AC adapter Z1002, battery packs Z1003 (up to 3 hours operation)
- Dimensions: 264 mm (W) × 150 mm (H) × 68 mm (D) - Weight: 2.6 kg
- Flexible current sensors (CT7045):
- Rated measuring current: 6000 A AC
- Measuring range: 600 A / 6000 A AC
- Max. permissible input: 10000 A continuous (at 6000 A, 45 to 66 Hz, requires derating)
- Bandwidth: 10 Hz to 50 kHz (±3 dB)
- Accuracy: ±1.5 % F.S., ±0.25 % F.S.
- Max. rated voltage to earth: 600 V (CAT IV), 1000 V (CAT III)
- Loop diameter: 180 mm
- Output connection: Hioki PL14
- Operating temperature: -25°C to 65°C
What's in the Box
- PQ3198 Power Quality Analyzer
- AC Adapter Z1002
- Battery Pack Z1003
- USB Cable
- Color Clips
- Spiral Tubes
- Carrying Case C1009
- Voltage Cords L1000
- Flexible Current Sensors CT7045 (4 units)
- SD Memory Card Z4001
- Patch Cords L1021-02 (3 units)
- PQ ONE Software CD
- Instruction Manual
- Measurement Guide
-
Product Catalog with data sheet, Field Measuring Instruments (English)37,775 KB pdf
-
Product catalog with datasheet, Selection guide, Power Quality Analyzers / Power Loggers (English)3,380 KB pdf
-
Product brochure with data sheet, POWER QUALITY ANALYZER PQ3100, PQ3198 (English)14,258 KB pdf
-
Instruction Manual, POWER QUALITY ANALYZER PQ3198 (English)11,173 KB pdf
-
Instruction Manual, POWER QUALITY ANALYZER PQ3198 (Spanish)11,270 KB pdf
Skip product gallery
Regular price:
€108.00
Regular price:
€78.00
Regular price:
€7,738.00
Related Products
L1000
HIOKI L1000 - Voltage Cord Set
The Voltage Cord Set L1000 is a voltage measurement accessory set consisting of leads and crocodile clips, adapted to the requirements of HIOKI power quality analysers and power analysers. It enables safe connection to measurement points and supports phase identification by colour coding. The set includes 3 m leads, one red, one yellow, one blue and one grey, as well as four black. These are equipped with 4 mm safety banana plugs and are used together with the colour-matched crocodile clips included in the set. With a maximum opening width of 33 mm, the crocodile clips are suitable for electrical conductors up to 25 mm in diameter. Typical applicationsVoltage measurement in power quality analysis Voltage measurement in multiphase systems Technical specifications Set contents: one red, one yellow, one blue, one grey and 4 black leads, each with matching crocodile clipLead: length 3 m (3000 mm), 4 mm safety banana plug Crocodile clip: colour coded, opening width 33 mm, for conductors up to Ø25 mm Measurement category: CAT III 600 V, CAT II 1000 VCompatible devicesPQ3198 PW3390 PW4001 PW8001 M7103
L1000-05
HIOKI L1000-05 - Voltage Cord Set
The Voltage Cord Set L1000-05 is a voltage measurement accessory set consisting of leads and crocodile clips, adapted to the requirements of the HIOKI PQ3100 power quality analyser. It enables safe connection to measurement points and supports phase identification by colour coding. The set includes 3 m leads, one red, one yellow, one blue, one grey and one black. These are equipped with 4 mm safety banana plugs and are used together with the colour-matched crocodile clips included in the set. With a maximum opening width of 33 mm, the crocodile clips are suitable for electrical conductors up to 25 mm in diameter. Typical applications Voltage measurement in power quality analysis Voltage measurement in multiphase systems Technical specifications Set contents: one red, one yellow, one blue, one grey and one black lead, each with matching crocodile clipLead: length 3 m (3000 mm), 4 mm safety banana plug Crocodile clip: colour coded, opening width 33 mm, for conductors up to Ø25 mm Measurement category: CAT III 600 V, CAT II 1000 V Compatible devicesPQ3100
PQ3198-92
PQ3198-92 - Power Quality Analyzer Kit
The PQ3198-92 Power Quality Analyzer Kit is a ready-to-use complete solution for Class A compliant power quality measurements and detailed analysis of electrical networks. The kit combines the high-performance PQ3198 Power Quality Analyzer with four 100 A AC current sensors (CT7136), making it ideal for energy audits, load studies, troubleshooting, and compliance testing according to EN 50160. The PQ3198 enables simultaneous recording of voltage, current, power, harmonics, flicker, and transients with high accuracy. It captures power disturbances such as voltage dips, swells, interruptions, and frequency variations while continuously logging trend data. With detailed waveform recording and advanced harmonic analysis, the system provides full visibility into network behavior. The -92 kit configuration is specifically designed for applications up to 100 A and is ideal for building installations, distribution panels, and precise energy analysis. Supplied in a durable, padded carrying bag, the kit is ideal for mobile use and fast deployment on site.
Local HIOKI support
Need more information before you decide? Our authorized distribution partners can support you locally, answer your questions in your language, and help you find the right HIOKI solution.