L9795-01 - Connection Cable

The MR8790 Waveform Generator Unit is a 4-channel signal generation module for the memory recorders MR6000, MR6000-01, MR8740T, MR8740, MR8741, MR8827, MR8847A and MR8848. It generates DC and sine wave signals that can be used as stimulus signals in measurement and test systems. The module supports synchronized signal output alongside multi-channel acquisition, allowing correlation of generated signals with measured voltage, current or logic signals. Adjustable amplitude and frequency parameters enable flexible signal generation for development, validation and functional testing tasks.Typical applications include component testing, validation of analog input stages and evaluation of dynamic system behavior.Technical Specifications Number of channels: 4 (SMB output terminals) Output impedance: ≤1 Ω Max. rated voltage to ground: 30 V rms AC or 60 V DC Output voltage range: −10 V to +10 V (0 to 20 Vp-p, resolution 1 mV) Max. output current: 5 mA Output function: DC, sine wave (1 Hz to 20 kHz) Accuracy: amplitude ±0.25 % of setting ±2 mV p-p (1 Hz to 10 kHz); offset ±3 mV; DC output ±0.6 mV Compatible memory recordersMR6000 MR6000-01MR8740TMR8740MR8741MR8827MR8847AMR8848

The U8793 Arbitrary Waveform Generator Unit is a 2-channel signal generation module for the memory recorders MR6000, MR6000-01, MR8848, MR8827, MR8740, MR8741 and MR8740T. It supports both function generator and arbitrary waveform generator operation for outputting defined and user-defined waveforms. The unit generates DC, sine, square, pulse, triangular and ramp waveforms in a frequency range from 10 mHz to 100 kHz. In arbitrary mode, waveforms are output from measured data or external sources. Supported formats include CSV, TXT, WFG and TFG files, as well as data from Hioki instruments and the SF8000 Waveform Maker software. Signal output uses a 16-bit D/A converter with a refresh rate of 2 MHz. The output voltage ranges from −10 V to +15 V with an amplitude setting from 0 to 20 Vp-p and a resolution of 1 mV. The maximum output current is 10 mA with a minimum load of 1.5 kΩ. Sweep functions for frequency, amplitude, offset and duty (pulse only) are supported. A program function with up to 128 steps and loop function is available. The unit also provides a self-test function and external input/output control. Typical applications Typical applications include reproduction of recorded waveforms and their output for testing purposes. This includes playback of signal patterns such as voltage dips, interruptions and fluctuations based on real measurement data. Technical specifications Number of channels: 2; Output terminal: SMB (≤ 1 Ω) Output voltage: −10 V to +15 V; Amplitude: 0 to 20 Vp-p; Resolution: 1 mV Max. output current: 10 mA (Load ≥ 1.5 kΩ); Max. rated voltage to ground: 30 V AC / 60 V DC Waveforms: DC, sine, square, pulse, triangular, ramp; Frequency range: 10 mHz to 100 kHz Arbitrary mode: CSV, TXT, WFG, TFG, measured data, SF8000 D/A converter: 16 bit; Refresh rate: 2 MHz Sweep: frequency, amplitude, offset, duty (pulse); Program: max. 128 steps, loop (∞) Additional functions: self-test; external input/output control Compatible memory recorders MR6000, MR6000-01, MR8848, MR8827, MR8740, MR8741, MR8740T

Modular memory recorder, up to 32 channels, max. sampling rate 200 MS/s, max 1000 VDC isolated direct voltage input, up to 1 TB storage with SSD option, intuitive user interface, touchscreen, real-time waveform calculation and real-time saving

Modular memory recorder, up to 32 analog and 16 logic channels, max. sampling rate 20 MS/s, max 1000 VDC isolated direct voltage input, 1 TB storage with SSD option, optional real-time saving, rugged design, AC or DC power supply

The L9795-02 is a 1.5 m connection cable with an SMB connector and a BNC connector. It is used together with the MR8790 (Waveform Generator) and U8793 (Arbitrary Waveform Generator) output modules to apply the signals output by these modules to external devices, measurement setups or BNC adapters. The output modules are options for the HIOKI memory recorders MR6000, MR6000-01, MR8740T, MR8740, MR8741, MR8827, MR8847A and MR8848.The cable is rated for a maximum rated voltage to earth of 30 V rms or 60 V DC. Technical Data: Length: 1.5 mConnector: SMB connector to BNC connector Maximum rated voltage to earth: 30 V rms or 60 V DC