L2142 - Sharp-tip test leads for four-terminal resistance measurement
Four-terminal test leads with sharp gold-plated spring-loaded pogo-pin tips (Ø 3.55 mm,
cable length 3.0 m), for DC resistance measurements with HIOKI RM3548-50
Available stock:
1
Product details
Product number:
L2142
EAN:
4536036016044
Weight:
0.29 kg
Product information L2142 - Sharp-tip test leads for four-terminal resistance measurement
Key Specifications
- Type: Four-terminal test leads (red / black)
- Measurement type: DC resistance
- Tip type: Sharp gold-plated spring-loaded pogo pins (Ø 3.55 mm)
- Contact pressure: Approx. 1.2 kg at 4 mm stroke
- Lead length: 3.0 m (total, branch after 1.0 m; each lead 2.0 m)
- Construction: Four-terminal configuration (partly joined cable section)
- Compatible instruments: HIOKI RM3548-50, RM3548, and other DC four-terminal resistance meters
Detailed Product Overview
The L2142 test leads are designed for precise DC four-terminal resistance measurements with the HIOKI RM3548-50 portable resistance meter. In contrast to the L2141, they feature sharp, spring-loaded pogo-pin tips on both leads, allowing stable contact by penetrating paint, oxide, or other surface coatings to reach the conductive base material. This makes the L2142 ideal for resistance verification on coated or oxidized metal parts, such as grounding checks on painted frames, bus bars, or motor housings.Each lead pair is configured for four-terminal measurements, with separate SOURCE and
SENSE lines to minimize the influence of lead resistance and maintain consistent lowresistance readings. The gold-plated pogo-pin tips (Ø 3.55 mm) ensure excellent conductivity
and long-term durability, even during frequent measurement cycles. Each tip applies a
contact pressure of approximately 1.2 kg at a 4 mm stroke to maintain reliable electrical
contact on coated surfaces.
The combined cable section allows convenient handling and reduces cable clutter during
operation, while the split tip section provides independent positioning of the probes across
wider measurement points. With a total length of 3.0 m and a branch after 1.0 m, the L2142
offers sufficient reach for both benchtop and field applications, even when measuring large
structures or widely spaced terminals.
The L2142 is suitable for DC resistance measurements on painted or oxidized metal
surfaces where coating removal is not possible. For measurements on clean or machined
metal surfaces where coating penetration is not desired, the L2141 rounded-tip test leads are
recommended. Although originally developed for the HIOKI RM3548-50, the L2142 is also
compatible with the earlier RM3548 and other DC four-terminal resistance meters featuring
compatible connectors.
- L2142 Pogo Pin Test Leads (1 red, 1 black)
Related products
RM3548-50
RM3548-50 - Portable Resistance Meter
Handheld four-wire DC milliohm meter, test current range 500 nA to 1 A, ten resistance ranges from 3 mOhm to 3 MOhm, backlight display, optional Bluetooth communication
RM3545A-1
RM3545A-1 - Precision instrument for DC resistance, 13 ranges from 1 mΩ to 1200 MΩ
Widerstandsmessgerät, sehr hohe Genauigkeit und Mehrkanalfähigkeit, Prüfquelle: DC, 1 A max, schnellste Messgeschwindigkeit: 2,3 ms, feinste Auflösung: 1 nanoOhm
L2140
L2140 - 4-Terminal Test Lead Set for Extended-Reach DC Measurements
Key SpecificationsType: Four-terminal test lead set, red/blackMaximum rated voltage: 60 V DC Measurement type: DC resistance only (not suitable for AC impedance measurement) Red lead: 1.84 m, pogo-pin probe tip Ø 2.9 mm Black lead: 3.16 m, alligator clip for objects up to Ø 30 mm Contact pressure (pogo pin): Approx. 190 g initial, 250 g at 1 mm strokeConstruction: Four-terminal configuration; red and black leads not physically joined Compatible instruments: HIOKI RM3548-50, RM3548, and other DC four-terminal
resistance meters Detailed Product OverviewThe L2140 test lead set is designed for DC four-terminal resistance measurements, originally
developed for use with the HIOKI RM3548-50 portable resistance meter. It supports accurate
measurements across widely spaced test points, such as during EV and hybrid vehicle
maintenance, equipotential bonding tests, battery connection checks, motor winding
inspections, or resistance verification on industrial motors, transformers, and power supply
systems. The red lead features a straight, spring-loaded pogo-pin probe tip (tip diameter Ø 2.9 mm)
that provides stable contact on screws, busbars, or metallic terminals. The black lead is
equipped with a large alligator clip that securely grips objects up to Ø 30 mm, allowing
reliable connection to grounding points or wide conductors. Each lead pair is configured for four-terminal measurement, with separate SOURCE and
SENSE lines to minimize the influence of lead resistance and maintain measurement
consistency even when measuring over longer distances. The leads are not physically joined,
allowing flexible placement over several meters, which suits DC resistance measurement but
not AC impedance testing, where parallel cable routing is required to reduce inductive
effects. Rated for 60 V DC, the L2140 provides a sufficient safety margin for precision DC resistance
testing. Although originally designed for the RM3548-50, it is also compatible with the earlier
HIOKI RM3548 and with other instruments featuring compatible connectors. Its long and
flexible design also makes it suitable for test bench applications, for example with resistance
meters such as the HIOKI RM3545A.
L2141
L2141 - Rounded-tip pogo-pin test leads for four-terminal resistance measurement
Key SpecificationsType: Four-terminal test leads (red / black)Measurement type: DC resistance Tip type: Rounded gold-plated spring-loaded pogo pins (Ø 3.55 mm) Contact pressure: Approx. 1.2 kg at 4 mm stroke Lead length: 3.0 m (total, branch after 1.0 m; each lead 2.0 m) Construction: Four-terminal configuration (partly joined cable section) Compatible instruments: HIOKI RM3548-50, RM3548, and other DC four-terminal
resistance meters
Detailed Product OverviewThe L2141 test leads are designed for precise DC four-terminal resistance measurements
with the HIOKI RM3548-50 portable resistance meter. They feature rounded, spring-loaded
pogo-pin tips on both leads, providing stable and repeatable contact on metallic surfaces
without damaging the material. This makes the L2141 ideal for precision resistance
verification on clean or machined parts, such as bonding checks on metallic joints,
equipotential verification in aircraft and vehicle maintenance, and inspection of conductive
assemblies.Each lead pair is configured for four-terminal measurements, with separate SOURCE and
SENSE lines to minimize the influence of lead resistance and maintain consistent lowresistance readings. The gold-plated pogo-pin tips (Ø 3.55 mm) ensure excellent conductivity
and long-term durability, even during frequent measurement cycles. Each tip applies a
contact pressure of approximately 1.2 kg at a 4 mm stroke to maintain reliable electrical
contact on flat or even surfaces. The combined cable section allows convenient handling and reduces cable clutter during
operation, while the split tip section provides independent positioning of the probes on the
measurement surface. With a total length of 3.0 m, the L2141 offers sufficient reach for both
benchtop and field applications. The L2141 is suitable for DC resistance measurements on uncoated and sensitive metal
surfaces. For measurements through coatings or oxide layers, the L2142 puncture-pin type
leads are recommended. Although originally developed for the HIOKI RM3548-50, the L2141
is also compatible with the earlier RM3548 and other DC four-terminal resistance meters
featuring compatible connectors.
9465-10
9465-10 - Straight Test Lead with Pogo Pins
HIOKI 9465-10 straight pin type test lead, max. 60 VDC, total length 1900 mm, pogo pin tip with coaxial design, for BT3554 portable battery tester and RM3548 portable resistance meter
9465-11
9465-11 - PIN TYPE LEAD
Key SpecificationsType: Four-terminal test leads with straight pogo-pin tips Measurement type: DC resistance Tip type: Gold-plated spring-loaded pogo pins (Ø 2.9 mm, length 13.5 mm) Contact pressure: Approx. 190 g to 250 g (at 1 mm stroke) Lead length: Black 3.9 m, red approx. 2.0 m (joined for 1.75 m from instrument side)Construction: Four-terminal configuration with coaxial pogo-pin tips
Detailed Product OverviewThe 9465-11 test leads are designed for precise DC four-terminal resistance measurements
with the HIOKI RM3548 and RM3548-50 resistance meters. With a total cable length of 3.9
m for the black lead and approximately 2.0 m for the red lead, the 9465-11 provides
convenient access to measurement points positioned farther apart. From the instrument connector, the red and black leads are joined over approximately 1.75 m
before branching. The red lead extends about 5 cm beyond the split and terminates in an 18
cm handgrip with a straight pogo-pin tip. The black lead continues for about 2.0 m to an
identical handgrip with a straight pogo-pin tip. This asymmetrical configuration allows
measurements between test points spaced farther apart, while maintaining the mechanical
stability of a partially joined cable section. Unlike the L2140 lead set, which combines a pogo-pin tip on the red lead with a crocodile clip
on the black lead, both leads of the 9465-11 feature straight pogo-pin tips for precise contact
on defined metallic surfaces. Each pogo-pin tip (Ø 2.9 mm) has a coaxial design, with the
inner conductor acting as the SENSE line and the outer conductor as the SOURCE line. This
minimizes contact resistance and noise, ensuring stable and repeatable low-resistance
readings. The spring-loaded mechanism provides a defined contact pressure of
approximately 190 g to 250 g at 1 mm stroke, enabling reliable connection on small pads or
metallic terminals.
9465-90
9465-90 - Replacement Tip for Test Leads
9465-90 replacement Tip Pin, spare part for test leads 9465-10, 9465-11, L2020 and L2140, coaxial designed pogo pin, pack of one.