CM7290 - Display unit for current clamps (CT7600 and CT7700 series)

20 %

CT7636

AC/DC current sensor, DC up to 10kHz (-3dB), 600A AC/DC, +/-1.8% phase accuracy, 33 mm core diameter, 2.5m cable length, PL14 connection

€326.40* €408.00*

L9095

L9095 - Output cable for CM7290

The L9095 is a versatile output cable for connecting Hioki products with 3.5mm phone jacks to Hioki products with BNC terminal. Technical Data: Length: 1.5 m Connectors: two pole phone jack (3.5 mm), BNC male Compatible Hioki products: Loggers with BNC terminals, Devices with 3.5 mm phone connector output (CM7290, CM7291, FT3424, FT3425)

€58.00*

CT7642

CT7642 - AC/DC Current Probe

The Hioki CT7642 is a high-capacity AC/DC current sensor capable of measuring currents up to 2000 A. It operates over a wide frequency range from DC to 10 kHz, making it ideal for power electronics and waveform analysis. With a large conductor diameter of 55 mm, it is designed for industrial applications requiring precise, high-current measurements.The sensor provides high accuracy of ±1.5% for DC measurements and maintains performance across varied environmental conditions. Compatible with Hioki's Memory Recorders and data loggers, the CT7642 ensures reliable data acquisition for long-term monitoring.Technical Information:Measurement range: 2000 A AC/DC Frequency range: DC to 10 kHz Maximum conductor diameter: 55 mm Accuracy: ±1.5% for DC (45 Hz to 66 Hz) Operating temperature: −25°C to 65°C Safety category: CAT III 1000 V / CAT IV 600 VOutput connector: HIOKI PL14

€408.00*

20 %

CT7631

CT7631 - AC/DC Current Probe

The Hioki CT7631 is a high-performance AC/DC current sensor designed for accurate measurements up to 600 A. It operates across a wide frequency range, from DC to 10 kHz, making it ideal for a variety of applications including waveform analysis and current monitoring in power electronics. With a 33 mm conductor diameter and excellent safety ratings (CAT III 1000 V / CAT IV 600 V), it ensures reliable performance in both industrial and laboratory environments. The CT7631 is compatible with Hioki’s Memory Recorders and data loggers for efficient recording and analysis. Technical Information: Measurement range: 600 A AC/DC Frequency range: DC to 10 kHz Maximum conductor diameter: 33 mm Safety Category: CAT III 1000 V / CAT IV 600 V Output connector: HIOKI PL14 Typical accuracy: ±2.0% rdg. (45 Hz to 66 Hz) Operating temperature: −25°C to 65°C Dust and water resistance: IP40

€262.40* €328.00*

CT7731

CT7731 - AC/DC Current Probe

The Hioki CT7731 is a versatile AC/DC current sensor designed for accurate measurements up to 100 A. With a wide frequency range from DC to 5 kHz, it is perfect for waveform analysis and real-time monitoring in various applications. The CT7731’s compact design and 33 mm conductor diameter allow for easy installation in confined spaces. It features high precision with an accuracy of ±1.0% for DC measurements and ensures reliable performance in fluctuating temperature conditions. The sensor is compatible with Hioki's Memory Memory recorder and data loggers for efficient data collection and analysis. Technical Information: Measurement range: 100 A AC/DC Frequency range: DC to 5 kHz Maximum conductor diameter: 33 mm Accuracy: ±1.0% for DC (45 Hz to 66 Hz) Operating temperature: −25°C to 65°C Safety category: CAT III 1000 V / CAT IV 600 V Output connector: HIOKI PL14

€498.00*

20 %

CT7742

CT7742 - AC/DC AUTO-ZERO CURRENT SENSOR

The CT7742 is an advanced AC/DC current sensor with auto-zero functionality, providing stable and precise measurements over time by compensating for offset drift. Technical Details: Rated current: 2000 A AC/DC Frequency range: DC to 5 kHz Amplitude accuracy: ±1.5% rdg, ±0.5% f.s. Diameter of conductors: 55 mm (2.17 in.) Cable length: 2.5 m (8.2 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) CAT: IV 600 V, CAT III 1000 V Output terminal: PL14

€454.40* €568.00*

CT7736

CT7736 - AC/DC current clamp

The Hioki CT7736 is a high-performance AC/DC current sensor capable of measuring currents up to 600 A. With a frequency range from DC to 5 kHz, it is ideal for waveform analysis and high-current applications. The sensor features a compact design with a 33 mm conductor diameter, making it easy to install in various environments.Offering high accuracy of ±2.0% for DC measurements, the CT7736 is built for stable performance in fluctuating temperatures. It is compatible with Hioki's Memory Recorders and data loggers for precise and efficient data collection. Technical Information: Measurement range: 600 A AC/DCFrequency range: DC to 5 kHz Maximum conductor diameter: 33 mm Accuracy: ±2.0% for DC (45 Hz to 66 Hz) Operating temperature: −25°C to 65°CSafety category: CAT III 1000 V / CAT IV 600 V Output connector: HIOKI PL14

€568.00*

9234

9234 - Printer paper for MR8880-20, 8807/08, 8420 series

The 9234 is a printerpaper for MR8880 (PRINTER UNIT MR9000 required) and 8860, 8861, 8420, 8421, 8422, 8807, 8808, 8714, 8715 memory recorders. Technical Details:Roll type A6 width 112 mm × 18 m 10 rolls/set

€108.00*

MR9000

MR9000 - Printer module for MR8880-20

The MR9000 Printer Unit is designed for use with the Hioki MR8880-20 Memory recorder, enabling easy printouts of measurement results. This compact and efficient printer offers precise waveform documentation directly from the connected Memory HiCorder, making it ideal for fieldwork and quick data review. The MR9000 ensures seamless integration with your HiCorder, delivering accurate and reliable outputs for all your measurement needs. Technical Information: Compatible devices: Hioki MR8880-20 Memory HiCorder Usable recording paper: 9234 Recording Paper Recording width: 104 mm (832-dot resolution), waveform section width 100 mmRecording speed: Max 1 cm/s Paper feed accuracy: ±3% (at 25°C, 60% RH)

€628.00*

MR8870-20

MR8870-20 - Portable data recorder

The Hioki MR8870-20 Data Recorder is a versatile, compact oscilloscope-like device designed for high-speed waveform recording and long-term RMS data capture. It features isolated inputs for safe measurement of power lines, and its real-time data-saving functionality ensures continuous monitoring with minimal interruptions.With up to 1 MS/s sampling rate and the ability to record fluctuations in RMS data, the MR8870-20 is ideal for applications such as motor startup analysis, inverter output waveform monitoring, and CB timing measurements. Its portable design makes it easy to use on-site. Technical Details: Channels: 2 analog, 4 logic channels Max Sampling Rate: 1 MS/s (1 µs) Memory Capacity: 12 bits × 2 M-Words/channel Storage: CF card (up to 2 GB, FAT/FAT32) Display: 4.3-inch TFT color LCD Operating Temperature: 0°C to 40°C Power Supply: AC adapter (100–240 V), Battery Pack 9780 Dimensions: 176 mm (W) × 101 mm (H) × 41 mm (D) Weight: 600 g (with battery pack)

€1,248.00*

Z1002

Z1002 - Power supply unit for MR8880, MR8875, PW3198

Z1002 ist ein Universalnetzteil für Netzspannungen von 100 V bis 240 V AC, 50/60 Hz, das 12V DC, 5,25A max (63W) zur Verfügung stellt. Es ist geeignet für die Hioki-Produkte CT9557, MR8875, MR8880, PW3198, PQ3100, PQ3198.Technische Details: Eingangsbereich: 100VAC bis 240VAC Ausgang: 12VDC, 5,25A, Pmax 63W Restwelligkeit & Rauschen: 100mVpp DC-Stecker: gewinkelter Hohlstecker 5,5mm (Innenmaß 2,5mm)

€158.00*

L1012

L1012 - DC Power cable for LR8450, LR810x, MR8875 and MR8880

DC Power cable, 2 m, unprocessed ends, for LR8450, LR8450-01, LR8101, LR8102, MR8875 and MR8880

€38.00*

9445-02

9445-02 - AC-Adapter

The 9445-02 is an accessory AC adapter compatible with a wide range of Hioki products. It includes interchangeable plug heads, allowing it to adapt easily to international power outlets. Technical details: Type: Wall Mount AC plug head types: UL, CEE, BS, SAA, CCCInput range: 100VAC to 240VAC Output: 9VDC, 1.2A, Pmax 10.8WRipple & noise: 100mVpp DC connector: angled EIAJ-3 plug O.D. 4.75mm, I.D. 1.7mmPossible products: 283, 3284, 3285, 3290, 3290-10, 3540, 3664, FT3470-51, FT3470-52, SS7012

€98.00*

CT7131

CT7131 - AC Current Probe

The CT7131 AC Current Sensor is a versatile tool designed for accurate AC current measurements in various industrial applications. With a measurement range of up to 100 A, it provides reliable and precise performance for power analysis and current monitoring. Its compact design ensures easy handling and integration with Hioki measuring instruments, making it ideal for professionals seeking dependable measurement solutions. Technical Specifications: Measurement Range: 100 A ACFrequency Range: 40 Hz to 5 kHz Basic Accuracy: ±0.3% rdg.±0.02% f.s. Maximum Conductor Diameter: 15 mm Operating Temperature: -10°C to 50°C Cable Length: 2.5 mSafety Category: 300 V CAT III Output Connector Type: Hioki PL14 connector

€248.00*

20 %

LR8513

LR8513 - Bluetooth Current Logger

Compact 2-channel data logger, AC current logging with BNC current sensors, Bluetooth, max. 500 000 data points/channel, AC, DC or battery operation Banner Specs: 2 channels for BNC current sensors 500 mA - 2000 A AC Bluetooth data transfer Internal memory: Up to 500 000 data points per channel Power supply with AA alkaline batteries, AC adapter, external DC power supply USPs: Precise current measurement with HIOKI current sensors Applications: High-accuracy long-term current logging in confined spaces where wireless data acquisition and transfer is required Product In detail:The compact LR8513 Wireless Clamp Logger is a 2-channel data logger to record AC load and leak currents. A wide variety of current sensors can be connected to the logger’s BNC inputs, allowing current measurements from 500 mA to 2000 A AC. The logger fits neatly inside distribution panels, enabling seamless external monitoring. Power measurements can be easily conducted by setting the voltage and power factor. Thanks to the Bluetooth® connectivity data can be easily downloaded to tablets or computers. Up to 500,000 data points per channel can be stored in the internal memory, making it ideal for long-term monitoring and analysis. The LR8513 can be powered with an optional AC adapter, AA alkaline batteries or with an external DC power supply.

€366.40* €458.00*

MR8901

MR8901 - Input module for MR8875

The Hioki MR8901 is a 4-channel analog input module designed for use with Hioki Memory Recorders. It allows precise voltage measurement across a wide range of frequencies, making it ideal for capturing fast transients and DC signals. With a maximum sampling rate of 500 kS/s and an integrated 16-bit A/D converter, it ensures high-resolution data acquisition.Technical Details:Channels: 4, voltage measurement Input Connectors: Isolated BNC (input resistance 1 MΩ, input capacitance 10 pF) Sampling Rate: 500 kS/s Measurement Range: 5 mV to 10 V/divLow-pass Filter: 5/50/500 Hz, 5 kHz Resolution: 1/1250 of measurement range (16-bit A/D converter) Accuracy: ±0.5% of full scaleFrequency Characteristics: DC to 100 kHz (-3 dB) Input Coupling: DC/GND Max Allowable Input: 150 V DC Dimensions: 119.5 mm (W) × 18.8 mm (H) × 151.5 mm (D)Weight: 180 g (6.3 oz)

€1,478.00*

Z1000

Z1000 - Battery pack for MR8880 and LR8400 series

The Z1000 Battery pack is a NiMH type recharchable battery for the MR8880, LR8400 series products. It charges when installed in the main unit. Product details: Rating: 7.2V, 4500mAh Weight: 0.37 kg

€288.00*

20 %

CT7046

CT7046 - AC FLEXIBLE CURRENT SENSOR

CT7046 - AC Flexible Current Sensor The CT7046 AC Flexible Current Sensor is designed for high-current measurements with a larger diameter to accommodate broader conductors. It provides reliable performance over a wide frequency range. Technical Details: Rated current: 6000 A AC Frequency range: 10 Hz to 50 kHz Amplitude accuracy: ±1.5% rdg, ±0.25% f.s. Diameter of conductors: 254 mm (10.00 in.) Cable length: 2.3 m, 0.2 m³ (7.55 ft., 0.66 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) CAT: IV 600 V, III 1000 V Output terminal: PL14

€326.40* €408.00*

MR8880 - Portable Memory Recorder, 4 Channels

MR8880-20

MR8880 - Portable Memory Recorder, 4 Channels

The MR8880 is a 4 channel portable data acquisition system (DAQ) with a maximum sampling rate of 1Msamples/s on all analog channels simultaneously. It has 4 analog direct input channels for voltages up to 600V and 8 logic channels.Technical Details: Complies CAT III 600V isolation for direct measure of 480V power line 4 complete isolated channels Operating temperature range of -10°C to 50°C Built to withstand mechanical shocks and vibrations PRESET function A memory capacity of 14bit × 1 M words/ch (1 word = 2 bytes)

€3,118.00*

MR8875

MR8875 - Portable memory recorder

The Hioki MR8875 Memory Recorder is a high-speed, multi-channel logger designed for long-term data recording and real-time waveform monitoring. It supports various input modules for mixed signal measurement, including voltage, temperature, strain, and CAN signals, with a sampling period as short as 2 µs. Its robust design is suitable for harsh environments, making it ideal for applications such as battery evaluation, motor testing, and power equipment analysis. Technical Details: Channels: Up to 60 channels with input modulesSampling Rate: 500 kS/sMemory Capacity: 32 MW (64 MB) Display: 8.4-inch TFT color LCD Storage: SD card, USB memory stick Dimensions: 298 mm × 224 mm × 84 mmWeight: 2.4 kg (excluding modules)

€4,758.00*

MR8904

MR8904 - Input module for MR8875

The Hioki MR8904 is a dual-port CAN (Controller Area Network) input module designed to interface with Memory recorder. It supports high-speed, low-speed, and single-wire CAN configurations, making it versatile for automotive and industrial applications. This module enables the analysis of up to 15 analog and 16 logic channels from CAN signals, providing precise data extraction and logging with fast response times. Technical Details:Input CAN Port: 2 ports, D-sub 9-pin male connectors Standards: ISO 11898 CAN 2.0b, ISO 11898-1, -2, -3, SAE J2411Interface: High-speed, low-speed, or single-wire CAN (selectable per port) Transmit ACK: ON/OFF for CAN signal acknowledgment Terminator: ON/OFF, 120 Ω built-in resistance Baud Rate: 50 kbps to 1 Mbps (high-speed), 10 kbps to 125 kbps (low-speed), 10 kbps to 83.3 kbps (single-wire) Analyzed Output Channels: Up to 15 analog and 16 logic channelsSignal Form: 1-bit to 32-bit signals (analog and logic) Response Time: Within 200 µs of receiving CAN message Dimensions: 119.5 mm (W) × 18.8 mm (H) × 151.5 mm (D)Weight: 185 g

€2,268.00*

MR8902

MR8902 - Input module for MR8875

The Hioki MR8902 is a 15-channel analog input module that supports both voltage and temperature measurements. It's designed for use with Memory recorder, offering flexibility for mixed-signal data capture across different types of sensors. With high-resolution measurements and customizable filtering, it’s ideal for applications requiring precise, multi-channel monitoring. This module offers robust performance for both voltage and temperature measurements in demanding applications.Technical Details: Channels: 15, for voltage/temperature measurementInput Connectors: Push button terminal (voltage/thermocouple) Voltage Measurement Ranges: 500 µV to 5 V/div (9 ranges) Temperature Measurement: Thermocouple types K, J, E, T, N, R, S, B, WRe5-26 Resolution: 1/1000 of measurement range (16-bit A/D converter) Digital Filter: 50 Hz, 60 Hz, or OFF Data Refresh Rate: 10 ms to 2 s (depending on filter settings) Max Allowable Input: 100 V DC Dimensions: 119.5 mm (W) × 18.8 mm (H) × 184.8 mm (D) Weight: 190 g

€1,648.00*

CT7045

CT7045 - AC flexible current transformer

AC flexible Current Sensor, 10 Hz to 50 kHz (+/-3dB), 6000A AC, 180 mm diameter, PL14 terminal

€378.00*

20 %

CT7116

CT7116 - AC LEAKAGE CURRENT SENSOR

The CT7116 is designed for precise leakage current measurements with high accuracy. It supports BNC conversion for versatile applications. Technical Details: Rated current: 6 A AC Frequency range: 40 Hz to 5 kHz Amplitude accuracy: ±1.0% rdg, ±0.05% f.s. Diameter of conductors: 40 mm (1.57 in.) Cable length: 2.5 m (8.20 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) Output terminal: PL14

€270.40* €338.00*

MR8905

MR8905 - Input module for MR8875

The Hioki MR8905 is a 2-channel input module designed for high-precision voltage and RMS measurements. It allows switching between instantaneous values and AC RMS values, making it ideal for applications in power analysis and waveform monitoring. With a high sampling rate and integrated low-pass filter, the module ensures accurate data acquisition. Technical Details: Channels: 2, switchable between instantaneous value and AC RMS valueInput terminals: Banana jacks (CAT II 1000 V AC & DC, CAT III 600 V AC & DC) Measurement range: 500 mV to 50 V/div, 7 ranges Low-pass filter: 5/50/500/5 kHz, OFF Resolution: 1/1250 of the measurement range (16-bit A/D converter) Sampling rate: 500 kS/s (simultaneous for 2 channels) Accuracy: ±0.5% f.s. (with 5 Hz filter ON) RMS accuracy: ±1.5% f.s. (30 Hz to 1 kHz), ±3% f.s. (1 kHz to 10 kHz) Input coupling: DC/AC RMS/GNDMaximum input: 1000 V DC, 700 V AC Dimensions: 119.5 mm × 18.8 mm × 151.5 mm Weight: 185 g

€1,478.00*

U8332

U8332 - SSD Unit for MR6000, 256 GB, factory option

SSD Unit for MR6000, 256 GB, factory option, allows real-time recording at maximum 20 MS/s In detail:256 GB SSD Unit for the MR6000 Memory Recorder, available as a factory-installed option. This unit expands the built-in storage capacity and enables real-time recording directly to the SSD with a maximum sampling speed of 20 MS/s, when used with the MR6000-01 model. The SSD option must be ordered together with the main instrument at the time of purchase. For installation at a later stage, the main instrument must be sent to a HIOKI service center.

CT7126

CT7126 - AC Current Probe

The CT7126 AC Current Sensor is a compact, reliable solution for accurate AC current measurement. Ideal for power measurement and analysis, the sensor is designed to meet the needs of various industrial applications. Its compact form factor allows for easy handling, while its durable construction ensures precise and consistent performance. Technical Specifications: Measurement Range: 60 A AC Frequency Range: 40 Hz to 5 kHzBasic Accuracy: ±0.3% rdg. ±0.01% f.s. Maximum Conductor Diameter: 15 mm Operating Temperature: -10°C to 50°C Cable Length: 2.5 m Safety Category: 300 V CAT III Output connector: Hioki PL14 Connector

€248.00*

C1004

C1004 - Case with castors for MR8875

The C1004 is a rugged rolling hard case designed specifically for the MR8875. It features built-in wheels and a telescoping handle, providing excellent mobility for field use. The case includes dedicated compartments for both the main unit and additional accessories, ensuring secure and organized storage. This robust trunk-style case offers exceptional protection for your equipment during transport.Technical Information: Length: 5570 mm Width: 2380 mm Height: 3760 mm Weight: 6.3 kg Type: Rolling hard case with wheelsCompatibility: MR8875, includes compartment for accessories

€678.00*

Z5021

Z5021 - Power supply unit for current or differential probes, factory option for MR6000

Power supply unit for up to 8 current clamps of the CT670x/327x Series, up to 4 current clamps of the CT671x Series, up to eight 9322 or up to three P9000 differential probes, factory option for MR6000, 12 VDC and 0.6 A per terminal

MR8903

MR8903 - Input module for MR8875

The Hioki MR8903 is a 4-channel input module designed for voltage and strain measurements, ideal for precision data acquisition in industrial and research environments. It supports a wide range of strain gauges and offers electronic auto-balancing, ensuring high accuracy in both dynamic and static measurements. The module features customizable low-pass filters and provides high-resolution data capture with a 16-bit A/D converter. Technical Details: Channels: 4, selectable for voltage/strain measurement Voltage Measurement Range: 50 µV to 1000 µV/div Strain Measurement Range: 20 µε to 1000 µε/div Input Connectors: Strain gauge converter, Bridge resistance: 120 Ω to 1 kΩ Max Sampling Rate: 200 kS/s Low-pass Filter: 5/10/100 Hz, 1 kHz, OFFResolution: 1/1250 of measurement range (16-bit A/D converter) Max Allowable Input: 5 V DC Dimensions: 119.5 mm (W) × 18.8 mm (H) × 151.5 mm (D)Weight: 173 g

€3,398.00*

Z1003

Z1003 - Battery pack for MR8875, PW3198

The Z1003 is a 7.2 V DC, 4500mAh Nickel-Metal Hydride (Ni-MH) rechargeable battery pack designed for use with Hioki devices such as the MR8875, PQ3198/PW3198, and PQ3100. It provides reliable power, ensuring extended operation in the field and in demanding environments. Technical Details: Battery Type: Ni-MH Voltage: 7.2 V DC Capacity: 4500mAh Compatible Devices: MR8875, PQ3198/PW3198, PQ3100

€168.00*

20 %

CT7044

CT7044 - AC FLEXIBLE CURRENT SENSOR

The CT7044 AC Flexible Current Sensor is ideal for measuring high currents over a wide frequency range. It features a flexible design with a 100 mm diameter, making it suitable for large conductors in tight spaces. Technical Details: Rated current: 6000 A AC Frequency range: 10 Hz to 50 kHz Amplitude accuracy: ±1.5% rdg, ±0.25% f.s. Diameter of conductors: 100 mm (3.94 in.) Cable length: 2.3 m, 0.2 m³ (7.55 ft., 0.66 ft.) Operating temperature: -25°C to 65°C (-13°F to 149°F) CAT: IV 600 V, III 1000 V Output terminal: PL14

€270.40* €338.00*

CT7136

CT7136 - AC Current Probe

The CT7136 AC Current Sensor is designed for high-accuracy current measurements up to 600 A, making it ideal for industrial applications where large currents and high precision are required. Its robust build and wide frequency range ensure reliable performance, even in demanding environments. The sensor easily integrates with Hioki measuring instruments, allowing for seamless data collection and analysis. Technical Specifications: Measurement Range: 600 A ACFrequency Range: 40 Hz to 5 kHz Accuracy / Amplitude Accuracy: ±0.3% rdg. ±0.01% f.s. Maximum Conductor Diameter: 46 mm Operating Temperature: -10°C to 50°C Cable Length: 2.5 m Safety Category: 1000 V CAT III, 600 V CAT IV Output Connector Type: Hioki PL14 connector

€278.00*

MR6000

MR6000 - 32-channel modular memory recorder, 200 MS/s, 1000V, touchscreen

Modular memory recorder, up to 32 channels, max. sampling rate 200 MS/s, max 1000 VDC isolated direct voltage input, up to 256 GB storage with SSD option, intuitive user interface, touchscreen, real-time waveform calculation and real-time saving

L9094

L9094 - Output cable for 3283

The L9094 is a versatile output cable for connecting Hioki products with 3.5mm phone jacks to transmit analogue information to devices with banana jacks as inputs. Technical data: Length: 1.5 m Connectors: two pole phone jack (3.5 mm), banana plug 4 mm Compatible Hioki products: 3283, 3284, 3285, 3664, FT3406, FT3424, FT3425

€38.00*

L9096

L9096 - accessory cable

The L9096 is an accessory cable for Hioki products such as FT3424, FT3425, CM7290, CM7291 to connect these devices to Hioki data recorder terminal blocks. Technical details: Length: 1.5m Connector: Ø3.5mm Wire ends: plain black/red sleeving

€18.00*

Z5004

Z5004 - Magnetic Strap

The Z5004 is a holding strap with magnet that can be used with LR85xx / LR5000 series data loggers, PD3259 phase detectors and similar products and DT42xx series digital multi-meters. Suitable for:DT4252 DT4253 DT4254 DT4255 DT4256 DT4261 DT4281 DT4282 PD3259 PQ3100 PQ3198

€38.00*

Details