9694 - AC Clamp On Sensor, 5A, 40 Hz to 5 kHz
AC current probe, CAT III 300 V, measurement range up to 5 A AC, basic accuracy ±0.3% rdg., phase accuracy ±2°, frequency range 40 Hz to 5 kHz, max. conductor diameter 15 mm, operating temperature 0 °C to 50 °C
€278.00*
Content:
1 Each
In stock, delivery time: Ready for dispatch
Available stock:
3
Product details
Product number:
9694
EAN:
4536036007448
Length:
460 mm
Width:
210 mm
Height:
1350 mm
Weight:
0.34 kg
Product information "9694 - AC Clamp On Sensor, 5A, 40 Hz to 5 kHz"
Banner Specs
- AC currents up to 5 A, continuous 50 A (45 to 66 Hz)
- Frequency Bandwidth 40 Hz to 5 kHz
- Basic accuracy: ±0,3% rdg.,
- Operating temperature: 0°C to 50°C
- Output voltage ratio 10 mV / A
Applications
- AC current measurement on conductors rated for 5 A nominal current (continuous measurement up to 50 A)
- Current monitoring and logging in industrial AC power systems and branch circuits
- Measurement of output current and basic harmonic analysis in inverter-driven loads
- Installation in confined spaces, such as inside control cabinets or distribution boards
In detail:
The Hioki 9694 is a compact clamp-on current probe designed for AC current measurements up to 5 A in low-voltage circuits. Rated CAT III for AC voltages up to 300 V rms, it is suitable for use in power distribution systems, inverter-driven equipment, and installations with limited space, such as control cabinets. The current probe accommodates conductors up to 15 mm in diameter and operates reliably within an ambient temperature range of 0 °C to 50 °C.
It supports continuous current measurements up to 50 A AC in the frequency range from 45 Hz to 66 Hz. Basic amplitude accuracy is ±0.3% of reading, while phase accuracy is ±2° between 45 Hz and 5 kHz. In the extended frequency range from 40 Hz to 5 kHz, amplitude deviation is ±1%.
The output signal of 10 mV/A is delivered via a fixed 3-meter cable with BNC connector, suitable for voltage-input instruments such as the Hioki PW3360 and PW3365.
- 9694 Clamp On Sensor
- Instruction Manual
Related products
PW3360-20
PW3360-20 - CLAMP ON POWER LOGGER
The HIOKI PW3360-20 is a compact 3-phase, 4-wire energy logger that monitors power demand and parameters, ideal for energy audits and validating savings. Banner Specs: Supports single to three-phase, 4-wire circuits or simultaneously measures up to three single-phase, 2-wire circuits A basic accuracy of ±0.3% rdg. ±0.1% f.s (voltage, current, active power) Measures voltage from 90V to 780V Current from 500mA to 5.000kA (with the right sensor) A Power range from 300.00 W to 9.0000 MW Stores months of data on SD cards QUICK SET function ensures correct connections Available interfaces: SD/SDHC memory card, LAN, USB 2.0 HTTP server function
PW3360-21
PW3360-21 - CLAMP ON POWER LOGGER
The HIOKI PW3360-21 is a compact 3-phase, 4-wire energy logger that monitors power demand and parameters, ideal for energy audits and validating savings. Technical Details: Supports single to three-phase, 4-wire circuits or simultaneously measures up to three single-phase, 2-wire circuits A basic accuracy of ±0.3% rdg. ±0.1% f.s (voltage, current, active power) Measures voltage from 90V to 780V
• Current from 500mA to 5.000kA (with the right sensor) A Power range from 300.00 W to 9.0000 MW Stores months of data on SD cards QUICK SET function ensures correct connections harmonic measurements up to the 40th order Available interfaces: SD/SDHC memory card, LAN, USB 2.0 HTTP server function
PW3365-20
PW3365 - Non-contact power logger with voltage and current sensors
Non-contact 3-phase 4-wire Clamp-on Power Logger, 90 V to 520 V at 50/60 Hz, 50 mA to 5 kA using external current sensors, harmonic measurement up to the 13th order, SD memory card slot (max. 8 GB), LAN and USB interface