9657-10 - Precision AC clamp leak current sensor, 10 A, 40 Hz to 5 kHz

AC current probe, measurement range up to 10 A AC, max. input 30 A, base accuracy ±1.0% rdg, phase accuracy ±3°, frequency range 40 Hz to 5 kHz, max. conductor diameter 40 mm, CAT III 300 V, BNC Connector
Product information "9657-10 - Precision AC clamp leak current sensor, 10 A, 40 Hz to 5 kHz"
Banner Specs 
  • AC rated current up to 10 A., continuous current: 30 A 
  • Frequency Bandwdth 40 Hz to 5 kHz 
  • Basic accuracy: ±1.0% rdg. 
  • Operating temperature: 0–50 °C 
  • Output voltage ratio:
  • Conductor diameter: ≤ 40 mm 

Applications 
  • Measurement of small AC currents and leakage currents on insulated conductors up to 10 A nominal 
  • Residual current monitoring on PE conductors for preventive maintenance and insulation diagnostics 
  • Monitoring of current in single-phase and three-phase systems with low current levels
  • Detection of intermittent leakage currents when used with Power Meters, Power Loggers or Data loggers
  • Compact design allows installation in confined spaces such as distribution boards and control cabinets 

In Detail:
The Hioki 9657-10 is an AC current sensor designed for measuring low-level currents and leakage currents in electrical installations, with a nominal current range of up to 10 A and a maximum continuous current of 30 A. The output signal is specified at 100 mV/A. These characteristics allow for the detection of small current levels using measurement devices with appropriately matched input sensitivity.

The phase accuracy of the 9657-10 is specified as ±3° at 50/60 Hz for currents of 1 A and above. It is therefore suitable for applications where the phase relationship between current and voltage needs to be taken into account. Its design minimizes the influence of external magnetic fields and supports stable measurement results under typical installation conditions. Equipped with a BNC output, it can be used with devices that provide voltage inputs, such as power analyzers, power loggers, or data loggers. 

It is suitable for leakage current measurement on protective earth conductors, current monitoring in single-phase and three-phase systems, and the detection of intermittent leakage currents when used with appropriate recording instruments. Due to its compact form factor, the sensor can be installed in control cabinets and distribution boards. The sensor is designed in accordance with EN 61010 and EN 61326.
  • 9657-10 Clamp On Leak Sensor
  • Instruction Manual

Related products

20 %
LR8513
LR8513 - Bluetooth Current Logger
Compact 2-channel data logger, AC current logging with BNC current sensors, Bluetooth, max. 500 000 data points/channel, AC, DC or battery operation Banner Specs: 2 channels for BNC current sensors 500 mA - 2000 A AC Bluetooth data transfer Internal memory: Up to 500 000 data points per channel Power supply with AA alkaline batteries, AC adapter, external DC power supply USPs:  Precise current measurement with HIOKI current sensors Applications: High-accuracy long-term current logging in confined spaces where wireless data acquisition and transfer is required Product In detail:The compact LR8513 Wireless Clamp Logger is a 2-channel data logger to record AC load and leak currents. A wide variety of current sensors can be connected to the logger’s BNC inputs, allowing current measurements from 500 mA to 2000 A AC. The logger fits neatly inside distribution panels, enabling seamless external monitoring. Power measurements can be easily conducted by setting the voltage and power factor. Thanks to the Bluetooth® connectivity data can be easily downloaded to tablets or computers. Up to 500,000 data points per channel can be stored in the internal memory, making it ideal for long-term monitoring and analysis. The LR8513 can be powered with an optional AC adapter, AA alkaline batteries or with an external DC power supply.

€366.40* €458.00*
20 %
LR5051
LR5051 - Data Logger for Current Clamps
The LR5051 pocket-sized logger records load and leakage currents across two channels, featuring high accuracy and compact design for easy deployment. Technical Details: Current range: 500 mA to 1000 A AC rms Accuracy: +/- 2%rdg, +/- 0.13%f.s. Memory: 60,000 data points, 2ch memory Recording intervals: Starting from 1s 

€270.40* €338.00*
PW3360-20
PW3360-20 - CLAMP ON POWER LOGGER
The HIOKI PW3360-20 is a compact 3-phase, 4-wire energy logger that monitors power demand and parameters, ideal for energy audits and validating savings. Banner Specs: Supports single to three-phase, 4-wire circuits or simultaneously measures up to three single-phase, 2-wire circuits A basic accuracy of ±0.3% rdg. ±0.1% f.s (voltage, current, active power) Measures voltage from 90V to 780V Current from 500mA to 5.000kA (with the right sensor) A Power range from 300.00 W to 9.0000 MW Stores months of data on SD cards QUICK SET function ensures correct connections Available interfaces: SD/SDHC memory card, LAN, USB 2.0 HTTP server function

€1,248.00*
PW3365-20
PW3365 - Non-contact power logger with voltage and current sensors
Non-contact 3-phase 4-wire Clamp-on Power Logger, 90 V to 520 V at 50/60 Hz, 50 mA to 5 kA using external current sensors, harmonic measurement up to the 13th order, SD memory card slot (max. 8 GB), LAN and USB interface

€3,058.00*