IM9905 - APC-7 Calibration Standards for Impedance Analyzers
Calibration kit with OPEN, SHORT and LOAD standards for 7 mm (APC-7) reference plane
€4,168.00*
Content:
1 Each
€4,168.00*
IM9905 - APC-7 Calibration Standards for Impedance Analyzers
Product number:
IM9905
EAN:
4536036002580
Weight:
1.24 kg
Product information IM9905 - APC-7 Calibration Standards for Impedance Analyzers
The IM9905 calibration kit provides OPEN, SHORT and LOAD standards for calibration of
HIOKI impedance analyzers with two-terminal measurement capability at the 7 mm (APC-7)
reference plane. These standards are used to correct systematic measurement errors in the
measurement path up to this reference plane.
For calibration of impedance measurement systems, the 7 mm (APC-7) reference plane is
commonly applied in high-frequency metrology. When calibration is performed on systems
with a 3.5 mm test head, such as those of the HIOKI IM7587, IM7585, IM7583 or IM7581, a
suitable adapter is required to establish the 7 mm reference plane. The adapter provided by
HIOKI for this purpose is the IM9906.
- OPEN calibration standard
- SHORT calibration standard
- LOAD calibration standard
- CD-ROM with PC application software
- Carrying case - Instruction manual
Related products
IM9906
IM9906 - 7 mm (APC-7) to 3.5 mm Adapter
The IM9906 adapter features a 7 mm (APC-7) connection on one side and a 3.5 mm male
connector on the other side. It is used to connect 7 mm calibration standards or test fixtures
to measurement systems with a 3.5 mm test head, including HIOKI impedance analyzers
such as the IM7587, IM7585, IM7583 and IM7581. The 7 mm (APC-7) interface is commonly used in high-frequency metrology for calibration
standards and impedance test fixtures. The 3.5 mm interface is a precision coaxial connector
used for RF and impedance measurements and is mechanically compatible with SMA
connectors, but differs in construction by using an air dielectric instead of a solid dielectric.
IM7587-01
HIOKI IM7587 - High-Frequency Impedance Analyzer, 1 MHz to 3 GHz
High-frequency impedance analyzer for RF component testing from 1 MHz to 3 GHz in development and production. HIOKI IM7587 available from HIOKI Europe.
IM7583-01
HIOKI IM7583 - High-Frequency Impedance Analyzer, 1 MHz to 600 MHz
High-frequency impedance analyzer for RF component testing from 1 MHz to 600 MHz in development and production. HIOKI IM7583 available from HIOKI Europe.
IM7581-01
HIOKI IM7581 - Impedance Analyzer for HF Components, 100 kHz to 300 MHz
HIOKI IM7581 HF impedance analyzer for precise RF component testing from 100 kHz to 300 MHz in R&D and production. Order now from HIOKI Europe.
IM9201
IM9201 - SMD Test Fixture for Impedance Measurements, DC to 3 GHz
The IM9201 SMD test fixture is designed for impedance measurements of surface-mount
components (SMD) in combination with HIOKI impedance analyzers that support twoterminal measurement configurations. It supports measurements up to 3 GHz and
accommodates SMD component sizes from EIA0201 to EIA1210.The IM9201 supports measurements up to 3 GHz, which aligns with the frequency range of
high-frequency impedance analyzers such as the IM7587 and IM7585. The test fixture can
also be used with impedance analyzers featuring lower maximum measurement frequencies,
such as the IM7583 or IM7581, when measurements of small SMD component sizes below
EIA0603 are required.For stable operation, the IM9201 is mounted on the IM9200 stand, which provides a secure
base and defined mechanical alignment between the analyzer test head and the test fixture.
Handling of small SMD components is further facilitated by the magnifier supplied with the
IM9200 stand. Electrical connection to the analyzer test head is performed via the 7 mm
interface of the test fixture. The IM9906 adapter is required to connect the 7 mm interface of
the test fixture to the analyzer test head’s 3.5 mm connector. The IM9201 is supplied with a carrying case designed for storage and transport of the test
fixture and its included accessories. The carrying case also provides dedicated space for
optional accessories such as the IM9906 adapter and IM9905 calibration standards, allowing
related components to be stored together when required.
IM9202
IM9202 - Test Fixture for Impedance Measurements, DC to 600 MHz
The IM9202 test fixture is designed for two-terminal impedance measurements of axial and
radial leaded components as well as surface-mount components (SMD). It supports
measurements up to 600 MHz and is used in combination with HIOKI impedance analyzers,
including IM7587, IM7585, IM7583 and IM7581. Axial leaded components with lead spacing from 1 mm to 25 mm and radial leaded
components with lead spacing from 2 mm to 26 mm can be measured, as defined by the
fixture geometry. Supported SMD component sizes are EIA0603 (Electronic Industries
Alliance) and larger. For stable operation, the IM9202 is mounted on the IM9200 stand, which provides a secure
base and defined mechanical alignment between the test head and the fixture and supports
handling of small components. Electrical connection to the analyzer test head is performed
via the 7 mm interface of the test fixture. The IM9906 adapter is required to connect the 7
mm interface of the test fixture to the analyzer test head’s 3.5 mm connector. The IM9202 is supplied with a carrying case designed for storage and transport of the test
fixture and its included accessories. The carrying case also provides dedicated space for
optional accessories such as the IM9906 adapter and IM9905 calibration standards, allowing
related components to be stored together when required.