LR8450 - Modular multi-channel Data Logger

The power cable L1012 is designed to provide power through the DC input of compatible devices. Measuring approximately 2 meters (6.6 feet) in length, it features unprocessed ends for flexible integration into various setups. This cable is compatible with the LR8101 and LR8102 Data Loggers, LR8450 and LR8450-01 Data Loggers, as well as the MR8880 and MR8875 Memory Recorders, offering a versatile solution for powering your equipment in the field or stationary configurations.Technical information:Length: approx. 2 m. Plug: angled Note: Can substitude L9500

The Z1014 is the AC adapter for HIOKI data loggers LR8450 and LR8450-01. It comes included with the data loggers but is also available separately as a replacement if needed. Technical Details: AC Inlet:IEC-60320-C14Input range: 100 VAC to 240 VAC Output: 12 VDC, 5.0 A, Pmax 60 W DC plug: angled hollow plug, 5.5 mm outside diameter, 2.5 mm inside diameter

The Z1007 is a lithium-ion battery pack for data loggers and wireless logger modules of the HIOKI LR8450 series.The batteries charge while installed in the data logger or one of the wireless modules. If a wireless module is powered via an AC adapter and the power supply is interrupted during a measurement, the wireless module will automatically switch to battery power.The LR8450 and LR8450-01 data loggers can be equipped with either one or two Z1007 battery packs, while each wireless logger module requires one Z1007. Installing one Z1007 in a logger provides approximately 2 hours of measurement time on battery power, depending on the number of connected modules. Using two Z1007 packs roughly doubles the runtime to around 4 hours.When a Z1007 is installed in a wireless logger module, the approximate runtimes are as follows:LR8530: 9 hoursLR8531: 7 hoursLR8532: 9 hoursLR8533: 9 hoursLR8534: 5 hoursLR8535: 10 hours (5 hours when using two non-contact CAN sensors)LR8536: 5 hoursTechnical details: Battery type: Lithium ionFor use with: LR8450, LR8450-01, LR8530, LR8531, LR8532, LR8533, LR8534, LR3535, LR8536Replacement battery for: LR8410, LR8510, LR8511

Banner Specs:  High accuracy ±0.3 % Measurable current 100 µA to 2 A Ultra small size sensor with slide open/lock mechanism Wide temperature range -40 to 85 oCDC to 5 kHz bandwidth with LR8450 Data Logger USPs:Easy installation, even in tight spaces Accurate low current measurement Allows for stable measurement from Alaska to the Sahara Applications:Development and analysis tool for improving the energy efficiency of electric vehicles (EV) Consumption monitoring of low power EV circuits like Engine Control Units (ECUs), interior lighting etc.Optimizing the overall energy consumption of low power circuits in EVs to extend the driving rangeOptimizing the overall energy consumption of low power circuits in electric construction vehicles or agricultural vehicles to extend the time between charging Product In detail: The ultra small CT7812 Current Probe with its slide-open/lock feature is one of the smallest high-accuracy sensors on the market. Contactless measurement of currents from 100 µA to 2 A AC/DC are possible even in the most confined spaces with a basic accuracy of ±0.3 %. It gives development engineers of EVs, electric trucks, buses, construction, and agricultural vehicles the possibility to accurately monitor energy consumption even under the most extreme temperature conditions. Exclusively designed to be used with the LR8450 Data Logger Series, up to 55 currents can be logged simultaneously on one device at a bandwidth of up to 5 kHz. Applications range from providing a detailed energy consumption insight of a vehicle under test to other complex electrical systems. The CT7812 with its PL14 connector can be used with the LR8450 Data Logger either in combination with the U8556 Plug-in Current Module or alternatively with the LR8536 Wireless Current Module (requires LR8450-01).

Banner Specs:  High accuracy ±0.3% Measurable current 1 mA to 20 A Ultra small size sensor with slide open/lock mechanism Wide temperature range -40 to 85oC DC to 5 kHz bandwidth with LR8450 Data Logger USPs:Easy installation, even in tight spaces Accurate low current measurement Allows for stable measurement from Alaska to the Sahara Applications: Development and analysis tool for improving the energy efficiency of electric vehicles (EV) Consumption monitoring of low power EV circuits like Engine Control Units (ECUs), wipers, entertainment system, seat heating etc. Optimizing the overall energy consumption of low power circuits in EVs to extend the driving range Optimizing the overall energy consumption of low power circuits in electric construction vehicles or agricultural vehicles to extend the time between charging In detail: The ultra small CT7822 Current Probe with its slide-open/lock feature is one of the smallest high-accuracy sensors on the market. Contactless measurement of currents from 1 mA to 20 A AC/DC are possible even in the most confined spaces with a basic accuracy of ±0.3 %. It gives development engineers of EVs, electric trucks, buses, construction, and agricultural vehicles the possibility to accurately monitor the energy consumption under the most extreme temperature conditions. Exclusively designed to be used with the LR8450 Data Logger Series, up to 55 currents can be logged simultaneously on one device at a bandwidth of up to 5 kHz. Applications range from providing a detailed energy consumption insight of a vehicle under test to other complex electrical systems. The CT7822 with its PL14 connector can be used with the LR8450 Data Logger either in combination with the U8556 Plug-in Current Module or alternatively with the LR8536 Wireless Current Module (requires LR8450-01).

The C1012 Carrying Case is designed for convenient and secure storage and transport of the LR8450 Data Logger Series and its modules and accessories. It features dedicated compartments with padded dividers to organize and protect the main unit, modules, the power adapters and cables. Additionally, the case includes a full-length outer compartment with a zipper, perfect for storing small accessories. The case also comes with a shoulder strap for comfortable transportation of the device.

Wireless multi-channel data logger, connect up to 4 plug-in and 7 wireless modules for max. 330 analog channels, max. 1 ms update interval, max. 100 VDC, 8 inputs for pulse/logic/rotational speed, 7“ TFT-Display, Gigabit-LAN und USB / SD card, optional battery operation Banner Specs Wireless LAN capability Up to 330 analog channels with plug-in and wireless modules and 8 pulse/logic inputs Voltage, current, temperature, humidity, resistance, heat flow, strain, pulse, CAN and CAN FD input and output Max. 1 ms update interval Optional battery operation USPs Maximum flexibility and high accuracy with wireless modules and real-time data transfer via Wireless LAN High-speed data recording with up to 1 ms Up to 330 analog channels and up to 55 current channels High-precision current logging with dedicated HIOKI current sensors CAN and CAN FD data input and output and measurement of strain, stress and heat flow Applications Current consumption in Electric Vehicles (EVs) Logging of voltage, current, temperature, resistance, vibration and strain during product development and production Long-term observation of stray currents in metro railway stations Observation of voltage, temperature and temperature distribution in Light Duty, Heavy Duty, construction and agricultural machinery (and data output via CAN) Process observation with heat flow sensors Measurement of temperature and heat flow for quality control, e.g. food processing Thermal Runaway of EV batteries Monitoring and maintenance of industrial equipment Observation of temperature and humidity for environmental and climate studies In detail:The modular LR8450-01 Data Logger is a highly versatile and adaptable solution, built for professionals who require both speed and scalability. This high-speed, multi-channel logger supports up to 120 channels through four plug-in modules, and with the addition of seven wireless modules, the maximum number of channels expands to 330. These wireless modules can be positioned in confined spaces or near the device under test, significantly reducing efforts and enhancing the measurement accuracy. The recorded data is transmitted via wireless LAN to the logger and can be monitored in real-time. The LR8450-01 features a 16-bit analog-to-digital converter (ADC) for enhanced measurement precision, and all modules that can be connected to the LR8450-01 are capable of handling direct voltages up to 100 V, with an isolation to earth of 300 V DC/AC, CAT II. Seven different module types are available for capturing data such as voltage, current, temperature (thermocouples or Pt100/1000), humidity, resistance, strain, pulse, and CAN (FD). HIOKI current sensors enable high-precision AC/DC current logging from 2 A to 6000 A, supporting up to 55 directly connected current sensors. Its 1 ms recording interval is ideal for capturing fast-changing signals, while the 7" TFT display provides clear, real-time data visualization for easy on-site monitoring. With the flexibility to run for hours on battery power, the LR8450-01 ensures continuous logging for both stationery and mobile testing. Data can be stored on SD cards or USB sticks, and retrieval is made easy through its Gigabit-LAN connector. The logger also features a DC input for additional supply power flexibility. If no wireless modules are used, the logger can be controlled wirelessly from a PC, allowing it to be placed in restricted or hard-to-access areas. Whether monitoring electric vehicles or managing complex industrial systems, the LR8450-01 sets the standard for precision and adaptability in data logging.